Non PCR-amplified Transcripts and AFLP®® fragments as reduced representations of the quail genome for 454 Titanium sequencing
© Pitel et al; licensee BioMed Central Ltd. 2010
Received: 31 March 2010
Accepted: 28 July 2010
Published: 28 July 2010
SNP (Single Nucleotide Polymorphism) discovery is now routinely performed using high-throughput sequencing of reduced representation libraries. Our objective was to adapt 454 GS FLX based sequencing methodologies in order to obtain the largest possible dataset from two reduced representations libraries, produced by AFLP® (Amplified Fragment Length Polymorphism) for genomic DNA, and EST (Expressed Sequence Tag) for the transcribed fraction of the genome.
The expressed fraction was obtained by preparing cDNA libraries without PCR amplification from quail embryo and brain. To optimize the information content for SNP analyses, libraries were prepared from individuals selected in three quail lines and each individual in the AFLP® library was tagged. Sequencing runs produced 399,189 sequence reads from cDNA and 373,484 from genomic fragments, covering close to 250 Mb of sequence in total.
Both methods used to obtain reduced representations for high-throughput sequencing were successful after several improvements.
The protocols may be used for several sequencing applications, such as de novo sequencing, tagged PCR fragments or long fragment sequencing of cDNA.
Next-generation sequencing can now generate from hundreds to thousands of megabases worth of data at a time . Although this is a great progress when compared to conventional Sanger sequencing, it remains costly to obtain SNP by whole-genome sequencing of many individuals, especially in species for which no assembly is available. Therefore, sequencing reduced representations libraries is still an efficient and sparing approach. We describe here two protocols used for high-throughput sequencing in quail with several improvements to existing methods [2, 3]. These can be applied to 454 library preparations for several purposes, such as cDNA sequencing without sample amplification, genomic DNA sequencing of scarce samples, or genomic sample multiplexing.
Transcripts library preparation
Total RNA was extracted from about 500 mg of adult quail brains (3 quail lines [4, 5], 4 samples each) and total embryos (E8 stage, 3 quail lines, 2 samples each) according to the technique described by Le Meur et al , slightly modified. Briefly, tissues were homogenized with a tissue homogenizer (TH, OMNI International) with extraction solution (LiCl 3 M, urea 6 M, sodium acetate 10 mM, pH 5.6), and conserved overnight at 4°C. After centrifugation, pellets were washed twice with washing solution (LiCl 4 M, urea 8 M) and dissolved in 500 μl of TES (Tris 50 mM, EDTA 20 mM, SDS 0.5%, pH 7.5) with Proteinase K (100 μg/ml). After incubation (30 min, 37°C), total RNA was phenol extracted with Phase Lock Gel (Phase Lock Gel Heavy, 2 ml, 5 Prime) according to the manufacturer's instructions except for the use of LiCl 5 M instead of sodium acetate 2 M. Total RNA yield was estimated on a NanoDrop 1000 spectrophotometer (NanoDrop).
Next, a DNase treatment was performed to remove any potential remaining DNA. For 45 μg of total RNA per sample, 20 U of RNasine (Promega), 10 U of DNAse (Roche), 1× of PCR buffer (Invitrogen), and 1.5 mM of MgCl2 (Invitrogen) were added after which the samples were incubated 30 min at 37°C, before a purification step (RNeasy minElute Cleanup, Qiagen). A control PCR was systematically performed to check for the absence of genomic DNA. The quality of RNA samples was assessed using the Agilent 2100 Bioanalyzer (Agilent Technologies). Equivalent quantities of each sample were pooled to obtain 75 μg of treated total RNA, for each quail line.
Poly(A)+ RNAs were then purified twice using the Dynabeads Oligo(dT)25 kit (Invitrogen). First strand cDNA was synthesized from the purified mRNA, using the Superscript II Reverse Transcriptase (Invitrogen), according to the manufacturer instructions, with a modified primer, GAGAGAGAGACTGGAG(T)16VN, containing the Gsu I restriction enzyme site (CTGGAGNNNNNNNNNNNNNNNN^, overhang NN-3'), to trim the polyA tail after cDNA synthesis. The other protocol modification was to use methylated dCTP (dm5CTP, Fermentas). The hemi-methylation is necessary to avoid internal cleavage by subsequent Gsu I digestion .
The second strand cDNA was synthesized according to the Second Strand Synthesis Invitrogen protocol by adding 1× of Second-Strand Reaction Buffer (Invitrogen), 0.2 mM of classical dNTP mix, 10 U of E. coli DNA Ligase (New England Biolabs), 40 U of E. coli DNA Polymerase (New England Biolabs), 2.5 U of E. coli RNase H (New England Biolabs). The samples were incubated 2 hours at 16°C. Ten units of T4 DNA polymerase (New England Biolabs) were added for 5 minutes and the reaction was stopped by adding EDTA to a final concentration of 30 mM. Samples were then incubated 15 min at 37°C with 5 U of Ribonuclease I (Fermentas). Next, cDNA were extracted by using phenol/chloroform and Phase Lock Gel (Phase Lock Gel Light, 2 ml, 5 Prime), followed by ethanol precipitation. The pellets were resuspended in 6 μl of water.
The double-strand cDNA was digested with 5 U of Gsu I for 60 minutes at 30°C, and the reaction was stopped by heating at 65°C for 20 minutes. The samples were then submitted to 454 sequencing, each library being prepared from the pooled cDNA obtained from two syntheses (namely issued from 2 × 75 μg of total RNA).
AFLP® fragments library preparation
Genomic DNA was extracted from blood samples of 6 animals (3 quail lines, 2 individuals each) with a rapid high-salt protocol . AFLP® fragments were generated as in , except that we only performed the preamplification step. Briefly, 400 ng of genomic DNA were digested with 10 U of EcoR I and Taq I restriction enzymes (New England Biolabs). Adaptors  were ligated to the DNA fragments obtained, and the ligation reaction was diluted 5-fold in water. PCR amplifications were carried out for each sample in 25 μl reactions containing 5 μl of diluted ligation, 0.2 units of Phusion high-fidelity DNA polymerase (New England Biolabs), 1× High-Fidelity buffer (New England Biolabs), 0.2 mM dNTP, and 0.2 μM of each primer on a GeneAmp PCR System 9700 thermocycler (Applied Biosystems).
Primers used for AFLP amplification
Thirty-five PCR cycles were performed, each consisting of denaturation at 94°C for 30 s, annealing at 59°C for 30 s and elongation at 72°C for 60 s. The ramp rate was settled to 80%. Polishing of PCR products was realized by the addition of 0.6 U T4 DNA Polymerase (New England Biolabs), 1× BSA, 1× T4 buffer (New England Biolabs), 0.1 mM dNTP and incubation at 12°C for 15 min. EDTA (10 mM) was added to stop the enzymatic reaction (20 min incubation at 75°C). All 6 samples were pooled and loaded as a unique sample on a 1% agarose gel, electrophoresed in 1× TBE buffer, and visualized by staining with ethidium bromide. A 200-400 bp fraction was recovered from the gel by cutting out the corresponding band and purifying the DNA with the Nucleospin Extraction kit (NucleoSpin® Extract II, Macherey-Nagel).
Fragments were sequenced using the Roche 454 Life Sciences Genome Sequencer FLX following the manufacturer's instructions for the Titanium series (454 Life Science, Roche). Libraries were prepared according to the 454 protocol: nebulization (only for the cDNA), purification, and ligation of adaptors. The libraries were prepared with ~9 μg (AFLP® fragments) or ~1 μg (cDNA fragments) using the "Titanium General Library Preparation Kit". Both genome representations were treated alike, except that AFLP® fragments did not undergo the first 3 steps (nebulization, Ampure purification, fragment end polishing). Because the recovered quantities were very low, cDNA library preparation was optimized as in  by retrieving fragments through heat denaturation: samples were eluted in 45 μL water, vortexed, denatured for 2 min at 90°C, and transferred to ice. A pellet of beads was obtained with the magnet, and the supernatant was collected and mixed with TE 10/1 to a final concentration of 1×.
DNA fragments were amplified using the "GS FLX Titanium SV emPCR Kit" (cDNA) or "GS FLX Titanium LV emPCR Kit" (AFLP® fragments). Sequencing on the Genome Sequencer FLX was performed using the "GS FLX Sequencing Kit Titanium Reagents XLR70".
The sequences are available at NCBI (http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/, SRA database, Accession number SRP002189).
Genomic AFLP® fragments
AFLP® fragments were sequenced using a half-plate, producing 373,484 reads and nearly 92 Mb. The average depth (8.6× for 4,929 analysed contigs, but with 56% of sequences as singlets) could be improved by performing other sequencing runs. The average sequence length (246 bp) should be increased by a gel cut at a higher size around 400 bp, or a reamplification step with 2 to 3 selective nucleotides - to limit the number of different fragments and keep an acceptable coverage - followed by an Ampure purification to remove short fragments.
We tagged each sample individually before making the 454 library on the pooled individuals. This procedure can have many applications, by drastically reducing the cost time spent and the amount of samples needed for this step. Library preparation is an important step in the sequencing protocol, regarding both handling time and financial costs. Moreover, each library requires a minimum amount of DNA or RNA starting material. Here, a single library is prepared instead of one per sample when tagging and multiplexing individual libraries. In addition, when sample selection is performed by sizing on gel, multiplexing individuals before retrieving the DNA fraction decreases the number of gels cuts and DNA extractions before library preparation. An important point here is also to avoid potential bias in the representation of each individual genome that could be caused by unavoidable slight difference between gel migrations and size estimations when cutting the gels.
Representation of each individual in the 153,469 double-tagged AFLP sequences
Using AFLP® fragments to obtain a reduced representation of the genome allows developing SNP markers even for species lacking a whole-genome draft sequence . Furthermore, the amplification step allows using a very small amount of DNA for the library preparation. The major advantage of this method when compared to the gel cut RRL (Reduced Representation Library), described for example by Van Tassel in cattle , is the possibility to multiplex several individuals in the same library preparation by using tagged PCR-primers, which was first done by Binladen and co-workers for a mitochondrial PCR fragment . The possibility offered here to identify the individual origin of each sequence and its SNP alleles allows to detect line-specific SNP, or to target directly for SNP informative in a dedicated cross, when sequencing F1 animals. These opportunities are absent for classical RRL sequencing without individual tagging. In addition, the use of 454 sequencing allowed the production of a sufficient amount of sequence flanking the SNP, which is essential for designing genotyping assays, in species where no genome draft is available . This would not have been the case with the Illumina technology available at the time.
For cDNA fragment sequencing, 6 quarter-plate runs (one for each tissue in each line), with an additional 1/8 of run gave a total of 399,189 reads and 154.3 Mb of sequence in total. The heterogeneity of the results (from 37,385 to 134,598 sequences per quarter-plate run) was partially due to the variable efficiency of the library preparations and we expect improved yields in the future. As previously observed , 454 runs on cDNA produce a smaller quantity of sequences than runs on genomic DNA. These sequences were assembled into 31,010 contigs (average depth of 11, from 2 to 3049), 36,572 sequences remaining as singlets.
Our method brings two important improvements to the classical 454 cDNA library preparation protocol. First, through the use of the heat-denaturation step  instead of the melting one (single-strand DNA is released from the beads through NaOH denaturation), a greater proportion of fragments is retrieved, and the use of a PCR step in the cDNA preparation becomes useless. The higher yield of heat treatment is notably due to the breaking of the biotin-streptavidin interaction.
This can be of great benefit when only a small amount of RNA is available, and when one wishes to avoid additional possible bias associated with PCR amplification: as PCR amplification from complex mixtures may generate representational differences between fragments , we chose to avoid any PCR amplification prior to the library preparation for the cDNA experiment. This allows the observed difference between samples of sequence frequencies for a given gene, to exactly represent its level of differential expression. Second, the use of a modified oligodT primer for the Reverse-Transcription step, associated with cDNA hemimethylation and Gsu I enzyme digestion, as suggested by Shibata et al , dramatically decrease the loss of efficiency in 454 sequencing related to homopolymers, especially problematic in the case of cDNA due to the poly(T) tail . In the present study, most of the 3'-end sequences were "polyA-cleaned" by the Gsu I treatment with only 647 fragments displaying the modified oligodT primer. A PCR-based method to limit the 3' homopolymer has also been described by Beldade , but would then have all the disadvantages related to PCR.
A preliminary analysis allowed detecting more than 8,500 putative SNP from these data: 6,888 from the cDNA sequences and 1,695 from the genomic fragments. Their experimental validation remains to be performed.
The methods presented in this paper may be used for several 454 sequencing applications like de novo sequencing, tagged PCR fragments sequencing or long fragment sequencing of cDNA.
We thank Margot Paris and Pierre Taberlet for fruitful discussion. The research program was supported by a grant from the French Institut National de la Recherche Agronomique (AIP Bioressources INRA) and the helpful support of the Plateforme génomique (PlaGe), Génopole Toulouse-Midi-Pyrénées. The AFLP® and CRoPS® technologies are covered by patents and patent applications owned by Keygene N.V. AFLP® and CRoPS® are registered trademarks of Keygene N.V.
- Metzker ML: Sequencing technologies - the next generation. Nat Rev Genet. 11: 31-46. 10.1038/nrg2626.Google Scholar
- van Orsouw NJ, Hogers RC, Janssen A, Yalcin F, Snoeijers S, Verstege E, Schneiders H, van der Poel H, van Oeveren J, Verstegen H, van Eijk MJ: Complexity reduction of polymorphic sequences (CRoPS): a novel approach for large-scale polymorphism discovery in complex genomes. PLoS One. 2007, 2: e1172-10.1371/journal.pone.0001172.PubMed CentralPubMedView ArticleGoogle Scholar
- Ng P, Tan JJ, Ooi HS, Lee YL, Chiu KP, Fullwood MJ, Srinivasan KG, Perbost C, Du L, Sung WK, Wei CL, Ruan Y: Multiplex sequencing of paired-end ditags (MS-PET): a strategy for the ultra-high-throughput analysis of transcriptomes and genomes. Nucleic Acids Res. 2006, 34: e84-10.1093/nar/gkl444.PubMed CentralPubMedView ArticleGoogle Scholar
- Mills AD, Faure JM: Divergent selection for duration of tonic immobility and social reinstatement behavior in Japanese quail (Coturnix coturnix japonica) chicks. J Comp Psychol. 1991, 105: 25-38. 10.1037/0735-7036.105.1.25.PubMedView ArticleGoogle Scholar
- Minvielle F, Monvoisin JL, Costa J, Frenot A, Maeda Y: Changes in heterosis under within-line selection or reciprocal recurrent selection: an experiment on early egg production in Japanese quail. J Anim Breed Genet. 1999, 116: 363-377. 10.1046/j.1439-0388.1999.00218.x.View ArticleGoogle Scholar
- LeMeur M, Glanville N, Mandel JL, Gerlinger P, Palmiter R, Chambon P: The ovalbumin gene family: hormonal control of × and Y gene transcription and mRNA accumulation. Cell. 1981, 23: 561-571. 10.1016/0092-8674(81)90152-5.PubMedView ArticleGoogle Scholar
- Shibata Y, Carninci P, Sato K, Hayatsu N, Shiraki T, Ishii Y, Arakawa T, Hara A, Ohsato N, Izawa M, Aizawa K, Itoh M, Shibata K, Shinagawa A, Kawai J, Ota Y, Kikuchi S, Kishimoto N, Muramatsu M, Hayashizaki Y: Removal of polyA tails from full-length cDNA libraries for high-efficiency sequencing. Biotechniques. 2001, 31: 1042, 1044, 1048-1049.Google Scholar
- Roussot O, Feve K, Plisson-Petit F, Pitel F, Faure JM, Beaumont C, Vignal A: AFLP linkage map of the Japanese quail Coturnix japonica. Genet Sel Evol. 2003, 35: 559-572. 10.1186/1297-9686-35-6-559.PubMed CentralPubMedView ArticleGoogle Scholar
- Maricic T, Paabo S: Optimization of 454 sequencing library preparation from small amounts of DNA permits sequence determination of both DNA strands. Biotechniques. 2009, 46: 51-52, 54-57. 10.2144/000113042.PubMedView ArticleGoogle Scholar
- Binladen J, Gilbert MT, Bollback JP, Panitz F, Bendixen C, Nielsen R, Willerslev E: The use of coded PCR primers enables high-throughput sequencing of multiple homolog amplification products by 454 parallel sequencing. PLoS ONE. 2007, 2: e197-10.1371/journal.pone.0000197.PubMed CentralPubMedView ArticleGoogle Scholar
- Van Tassell CP, Smith TP, Matukumalli LK, Taylor JF, Schnabel RD, Lawley CT, Haudenschild CD, Moore SS, Warren WC, Sonstegard TS: SNP discovery and allele frequency estimation by deep sequencing of reduced representation libraries. Nat Methods. 2008, 5: 247-252. 10.1038/nmeth.1185.PubMedView ArticleGoogle Scholar
- Craft JA, Gilbert JA, Temperton B, Dempsey KE, Ashelford K, Tiwari B, Hutchinson TH, Chipman JK: Pyrosequencing of Mytilus galloprovincialis cDNAs: tissue-specific expression patterns. PLoS One. 5: e8875-10.1371/journal.pone.0008875.Google Scholar
- Pinard R, de Winter A, Sarkis GJ, Gerstein MB, Tartaro KR, Plant RN, Egholm M, Rothberg JM, Leamon JH: Assessment of whole genome amplification-induced bias through high-throughput, massively parallel whole genome sequencing. BMC Genomics. 2006, 7: 216-10.1186/1471-2164-7-216.PubMed CentralPubMedView ArticleGoogle Scholar
- Wicker T, Schlagenhauf E, Graner A, Close TJ, Keller B, Stein N: 454 sequencing put to the test using the complex genome of barley. BMC Genomics. 2006, 7: 275-10.1186/1471-2164-7-275.PubMed CentralPubMedView ArticleGoogle Scholar
- Beldade P, Rudd S, Gruber JD, Long AD: A wing expressed sequence tag resource for Bicyclus anynana butterflies, an evo-devo model. BMC Genomics. 2006, 7: 130-10.1186/1471-2164-7-130.PubMed CentralPubMedView ArticleGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.