 Technical Note
 Open Access
 Published:
CUDASW++2.0: enhanced SmithWaterman protein database search on CUDAenabled GPUs based on SIMT and virtualized SIMD abstractions
BMC Research Notes volume 3, Article number: 93 (2010)
Abstract
Background
Due to its high sensitivity, the SmithWaterman algorithm is widely used for biological database searches. Unfortunately, the quadratic time complexity of this algorithm makes it highly timeconsuming. The exponential growth of biological databases further deteriorates the situation. To accelerate this algorithm, many efforts have been made to develop techniques in high performance architectures, especially the recently emerging manycore architectures and their associated programming models.
Findings
This paper describes the latest release of the CUDASW++ software, CUDASW++ 2.0, which makes new contributions to SmithWaterman protein database searches using compute unified device architecture (CUDA). A parallel SmithWaterman algorithm is proposed to further optimize the performance of CUDASW++ 1.0 based on the single instruction, multiple thread (SIMT) abstraction. For the first time, we have investigated a partitioned vectorized SmithWaterman algorithm using CUDA based on the virtualized single instruction, multiple data (SIMD) abstraction. The optimized SIMT and the partitioned vectorized algorithms were benchmarked, and remarkably, have similar performance characteristics. CUDASW++ 2.0 achieves performance improvement over CUDASW++ 1.0 as much as 1.74 (1.72) times using the optimized SIMT algorithm and up to 1.77 (1.66) times using the partitioned vectorized algorithm, with a performance of up to 17 (30) billion cells update per second (GCUPS) on a singleGPU GeForce GTX 280 (dualGPU GeForce GTX 295) graphics card.
Conclusions
CUDASW++ 2.0 is publicly available opensource software, written in CUDA and C++ programming languages. It obtains significant performance improvement over CUDASW++ 1.0 using either the optimized SIMT algorithm or the partitioned vectorized algorithm for SmithWaterman protein database searches by fully exploiting the compute capability of commonly used CUDAenabled lowcost GPUs.
Background
Sequence database searches in the field of bioinformatics are used to identify potential evolutionary relationships by means of identifying the similarities between query and subject sequences. The similarities between sequences can be determined by computing their optimal local alignments using the dynamic programming based on the SmithWaterman (SW) algorithm [1, 2]. However, the quadratic time complexity of this algorithm makes it computationally demanding, which is further compounded by the exponential growth of sequence databases. To reduce the execution time, some heuristic solutions, such as FASTA [3] and BLAST [4, 5], have been devised to reduce the execution time, usually producing good results. However, these heuristics might fail to detect some distantly related sequences due to the loss of sensitivity. In this case, the use of high performance architectures, especially the emerging accelerator technologies and manycore architectures such as FPGAs, Cell/BEs and GPUs, becomes one recent trend to execute the SW algorithm, allowing the production of exact results in a reasonably shorter time.
For the FPGA technology, linear systolic array and massively parallel computing using custom instructions are used to perform the SW algorithm. Oliver et al. [6, 7] constructed a linear systolic array to perform the SW algorithm on a standard Virtex II FPGA board using affine gap penalties. Li et al. [8] exploits custom instructions to accelerate the SW algorithm for DNA sequences on an Altera Stratix EP1S40 FPGA by dividing the SW matrix into grids of 8 × 8 cells. For the SIMD vectorization, particularly streaming SIMD extensions 2 (SSE2) technology, there are two basic vectorized SW algorithms available: one computes the algorithm using SIMD vectors parallel to the minor diagonal [9], and the other uses SIMD vectors parallel to the query sequence in a sequential layout [10] or a striped layout [11]. The striped SW approach [11] was then optimized for the Cell/BE [12]. SWPS3 [13] extends this work for the Cell/BE and also improves it for ×86/SSE2 to support multicore processors, and CBESW [14] is designed for the Cell/BEbased PlayStation 3. For generalpurpose GPUs, Liu et al. [15] developed an implementation of the SW algorithm using OpenGL as a first step. After the advent of CUDA programming model, SWCUDA [16] was developed using CUDA, supporting multiple G80 (and higher) GPUs. However, this algorithm distributes the SW computation among multicore CPUs and GPUs, which makes it highly CPU dependent and not able to truly exploit the computation power of GPUs. Different from SWCUDA, CUDASW++ 1.0 [17], designed for multiple G200 (and higher) GPUs, completes all the SW computations on GPUs by fully exploiting the powerful GPUs. To the best of our knowledge, CUDASW++ 1.0 was the fastest publicly available solution to the exact SW algorithm on commodity hardware before this paper.
In this paper, we present the latest release of the CUDASW++ software, CUDASW++ 2.0, which makes new contributions to SW protein database searches using CUDA by deeply exploring the compute power of CUDAenabled GPUs. An optimized SIMT SW algorithm is suggested to further optimize the performance of CUDASW++ 1.0 based on the SIMT abstraction. For the first time have we investigated a partitioned vectorized SW algorithm using CUDA based on the virtualized SIMD abstraction. CUDASW++ 2.0 obtains significant performance improvement over CUDASW++ 1.0 using either the optimized SIMT or the partitioned vectorized algorithms on the same platforms, achieving a performance of up to 17 (30) GCUPS on a singleGPU GeForce GTX 280 (dualGPU GeForce GTX 295) graphics card. In addition, it also outperforms the other previous SW sequence database search implementations on GPUs and some other implementations using SSE2, Cell/B.E or heuristics.
The SmithWaterman algorithm
The SW algorithm is used to identify the similarity between two sequences by computing the maximum local alignment score. Given two sequences S_{1} and S_{2} of lengths l_{1} and l_{2} respectively, the SW algorithm computes the similarity score H(i, j) of two sequences ending at position i and j of S_{1} and S_{2}, respectively. H(i, j) is computed as in equation (1), for 1 ≤ i ≤ l_{1}, 1 ≤ j ≤ l_{2}:
where sbt is the substitution matrix, ρ is the gap open penalty and σ is the gap extension penalty. A substitution matrix sbt gives the substitution rates of amino acids in proteins, derived from alignments of protein sequences. The recurrences are initialized as H(i, 0) = H(0, j) = E(i, 0) = F(0, j) = 0 for 0 ≤ i ≤ l_{1} and 0 ≤ j ≤ l_{2}. The maximum local alignment score is defined as the maximum score in H. The computation of each cell in H depends on its left, upper, and upperleft neighbors, as shown by the three arrows in Additional file 1. In addition, this data dependency implies that all cells on the same minor diagonal in the alignment matrix are independent, and can be computed in parallel. Thus, the alignment can be computed in minordiagonal order from the topleft corner to the bottomright corner in the alignment matrix, where the computation of minor diagonal i only needs the results of minor diagonals i1 and i2.
CUDA programming model
CUDA is an extension of C/C++ with a minimalist set of abstractions for expressing parallelism, enabling users to write scalable multithreaded parallel code for CUDAenabled GPUs [18]. A CUDA program consist of two parts: a host program running on the host CPU, and one or more parallel kernels which can be executed on GPUs with NVIDIA's Tesla unified graphics and computing architecture [19].
A kernel is written in conventional scalar Ccode, which represents the operations to be performed by a single thread and is invoked as a set of concurrently executing threads. These threads are organized into a grid of thread blocks, where a thread block is a set of concurrent threads. This hierarchical organization has implications for thread communication and synchronization. Threads in a thread block are allowed to synchronize with each other using barriers, and can communicate through a perblock shared memory (PBSM). However, threads located in different thread blocks cannot communicate or synchronize directly. To write efficient CUDA programs, besides the PBSM, it is important to understand the other memory spaces in more detail: noncached global and local memory, cached texture and constant memory as well as onchip registers.
The Tesla architecture is built around a fully programmable scalable processor array, organized into a number of streaming multiprocessors (SMs). Each SM contains eight scalar processors (SPs), sharing a PBSM of size 16 KB. All threads of a thread block are executed concurrently on a single SM. The SM executes threads in small groups of 32 threads, called warps, in an SIMT fashion. When one thread blocks is scheduled to execute on an SM, threads in the thread block are split into warps that get scheduled by the SIMT unit. A warp executes one common instruction at a time, but allows for instruction divergence. When divergence occurs, the warp serially executes each branch path. Thus, parallel performance is generally penalized by datadependent conditional branches and improved if all threads in a warp follow the same execution path. Branch divergence occurs only in a warp, and different warps run independently regardless of common or disjointed code paths they are executing.
Virtualized SIMD vector programming model
Because a warp executes one common instruction at a time, all threads in a warp are implicitly synchronized after executing any instruction. This execution manner is very similar to the characteristic of SIMD vector organizations that a single instruction controls multiple processing elements. Therefore, it is viable to virtualize a warp as an SIMD vector with each thread as a vector element. An alternative virtualization at the warp level is to divide a warp into several thread groups of equal size and then virtualize each thread group as a vector with each thread in the group as an element. However, for the current CUDAenabled GPU technologies, this warplevel virtualization limits the virtualized vector length to 32. To support longer vector lengths, vectors can be virtualized at the threadblock level, where a thread block is considered as a large vector with each thread in the thread block as an element. In this case, the intrinsic function __syncthreads() has to be used to explicitly synchronize all threads at specific synchronization points in the kernel to keep the correctness of the virtualized vector computations.
In this paper, we refer to the virtualized vector as virtualized SIMD vector and its corresponding programming model as virtualized SIMD model to differentiate from the real SIMD vector organizations. Since this virtualization is based on the SIMT model, the virtualized SIMD model shares all the features of the SIMT model with an additional ability to conduct vector computations. We define VL to denote the length of a virtualized vector, i.e. the number of data lanes of the vector. For the convenience of discussion, we assume that the first element (indexed by 0) is on the rightmost and the last element (indexed by VL  1) on the leftmost of the vector. Each thread comprising a virtualized vector is assigned a vector ID vtid that is equal to the position index of its corresponding vector element in the vector of length VL, where 0 ≤ vtid < VL. In this paper, we use warplevel virtualization to implement vectorized SW algorithms.
Methods
Query profile
To calculate H(i, j), the substitution score sbt(S_{1}[i], S_{2}[j]), from the substitution matrix, is added to H(i1, j1). Due to the huge number of iterations in the SW algorithm calculation, reducing the number of instructions needed to perform one cell calculation has a significant impact on the execution time. In this regard, Rognes et al. [10] and Farrar [11] suggested the use of a query profile parallel to the query sequence for each possible residue. A query profile is precalculated just once before database searches, and can be calculated in two layouts: a sequential layout [10] and a striped layout [11].
Given a query sequence Q of length l defined over an alphabet Σ, a query profile is defined as a numerical string set P = {P_{ r } r ∈ Σ}, where P_{ r }is a numeric string consisting of substitution scores that are required to compute a complete column (or row) of the alignment matrix, and the values of P_{ r }depend on whether it uses a sequential or a striped layout. For a sequential query profile (see Additional file 2), P_{ r }(i), the ith value of P_{ r }, is defined as
Even though a sequential query profile is initially designed for SIMD vector computation of the SW algorithm, it is also suitable for scalar computation of the algorithm. For SIMD vector computation, it generally aligns l according to vector length VL for performance consideration and pads Q with dummy residues that have a substitution score of zero between itself and any residue.
A striped query profile (see Additional file 3) is designed for SIMD vector computation. To construct a striped query profile, given a vector length VL, the query sequence Q is divided into a set of equal length query segments QSEG = {QSEG_{1}, QSEG_{2}, ..., QSEG_{ VL }} of VL elements. The length T of each query segment is equal to (l + VL  1)/VL. If l is not a multiple of VL, Q is first padded with dummy residues. For simplicity, we assume l is a multiple of VL. Correspondingly, each numerical string P_{ r }of a striped query profile can be considered as a set of nonoverlapping, consecutive VLlength vector segments VSEG = {VSEG_{1}, VSEG_{2}, ..., VSEG_{ T }} of T elements, where the ith element of VSEG_{ j }maps the jth element of QSEG_{ i }. Hence, P_{ r }(i) of a striped query profile is defined as
Optimized SIMT SmithWaterman algorithm using CUDA
The SIMT SW algorithm used by CUDASW++ 1.0 is designed based on the SIMT abstraction of CUDAenabled GPUs, which enables threadlevel parallelism for independent scalar threads as well as data parallelism for coordinated threads. It uses two stages to complete the database searches: the first stage uses intertask parallelization using threadlevel parallelism, and the second stage uses intratask parallelization using data parallelism. Since the first stage dominates the total runtime when searching large database, the optimizations of CUDASW++ 2.0 are focused on this stage. The performance of CUDASW++ 2.0 is significantly improved due to the following optimizations: introducing a sequential query profile and using a packed data format.
A sequential query profile stored in texture memory is used to replace random access to the substitution matrix in shared memory. Inspired by the fact that texture instructions output filtered samples, typically a fourcomponent (RGBA) color [19], the sequential query profile is reorganized using a packed data format, where each numerical string P_{ r }is packed and represented using the char 4 vector data type, instead of the char scalar data type. In this way, four substitution scores are realized using only one texture fetch, thus significantly improving texture memory throughput. Like the query profile, each subject sequence is also reorganized using a packed data format, where four successive residues of each subject sequence are packed together and represented using the uchar4 vector data type. In this case, when using the cell block division method, the four residues loaded by one texture fetch are further stored in shared memory for the use of the inner loop (see the pseudocode of the CUDA kernel shown in Figure 1). In addition, some redundant operations are removed to improve instruction pipeline throughput.
Basic vectorized SmithWaterman algorithm using CUDA
The basic vectorized SW algorithm is designed by directly mapping the striped SW algorithm [11] onto CUDAenabled GPUs using CUDA, based on the virtualized SIMD vector programming model. For the computation of each column of the alignment matrix, the striped SW algorithm consists of two loops: an inner loop calculating local alignment scores postulating that F values do not contribute to the corresponding H values, and a lazyF loop correcting any errors introduced from the calculations of the inner loop. The basic vectorized algorithm uses a striped query profile. In the alignment matrix, for a specific column, the inner loop is completed in T iterations by moving SIMD vectors sequentially through all vector segments of P_{ r }corresponding to this column. For the convenience of discussion, define vecH(i, j), vecE(i, j) and vecF to process the H, E and F values of the cells corresponding to VSEG_{ i }of P_{ r }, where 1 ≤ i ≤ T, for the jth column of the alignment matrix. Using virtualized SIMD vectors, several technical issues have to be addressed for this CUDA algorithm, including saturation algorithmic operations, shift operations and predicate operations on virtualized vectors.
Saturation additions and subtractions are required to calculate alignment scores. Since CUDAenabled graphics hardware lacks support for these operations, maximum and minimum operations are used to artificially implement them. The integer functions max(x, y) and min(x, y), in the CUDA runtime library, are used to avoid divergence. Shift operations on vectors are required both for the inner and lazyF loops. We implement these operations using shared memory, where all threads comprising a virtualized vector writes their original values to a share memory buffer and then reads their resulting values from the buffer as per the number of shift elements. Additional file 4 gives the CUDA pseudocode for shifting a virtualized vector by n elements to the left. As can be seen from the pseudocode, one shift operation is timeconsuming as compared with vector register operations in a real SIMD vector architectures, even though access to shared memory without bank conflicts has a much lower latency than device memory [20].
The lazyF loop requires predicate operations on virtualized vectors when determining whether to continue or exit the loop by checking vecF against the values of vecH(i, j). An approach is to use shared memory to simulate these operations. Although this approach is effective, it is inefficient due to the overhead incurred by the accesses to shared memory. Fortunately, CUDAenabled GPU devices with compute capability 1.2 and higher provide the support for two warp vote functions __all(int) and __any(int), providing an indispensible capability to perform fast predicate operations across all threads within a warp. We use the __all(int) warp vote function to implement the predicate operations on virtualized vectors for the lazyF loop.
The striped query profile is stored in texture memory to exploit the texture cache. Subject sequences and the query profile are stored using the scalar data type in an unpacked fashion because the inner loop is a for loop without manually unrolling. The intermediate element values of vecH(i, j) and vecE(i, j) are stored in global memory, with vecF stored in registers, to support long query sequences. To improve global memory access efficiency, we use the unsigned halfword data type to store the H and E values in global memory.
Partitioned vectorized SmithWaterman algorithm using CUDA
To gain higher performance, we have investigated a partitioned vectorized SW algorithm using CUDA. This algorithm first divides a query sequence into a series of nonoverlapping, consecutive small partitions as per a specified partition length (PL), and then aligns the query sequence to a subject sequence partition by partition. For the partitioned vectorized algorithm, PL must be a multiple of VL. The alignment between one partition of the query sequence and the subject sequence is performed using the basic vectorized algorithm. In this case, because PL is usually set to be relatively smaller, shared memory or registers can be used to store the alignment scores.
In this algorithm, it considers each partition as a new query sequence and constructs a striped query profile for each partition. However, this partitioned vectorized algorithm makes the alignment of one partition depend on the alignment scores of the previous partition in the alignment matrix (see Figure 2). More specifically, the computation of the H and F values of the first row of one partition depends on the H and F values of the last row of the previous partition (note that the positions of the first and the last rows are kept unchanged for a striped query profile regardless of the specific values of PL and VL). In this case, after having completed the computation of one column of a partition, the H and F values of the last cell in this column have to be saved for the future use of the next partition. For performance consideration, instead of directly storing F value of the last cell of the partition, we store the F value of the first cell of the next partition, calculated from the H and F values of the last cell in the current partition. However, there is a problem with the striped algorithm in that for a specific column, after exiting from the lazyF loop, it makes sure that the H and E values of all cells are correct, but provides no guarantee that vecF stores the correct F value of the last cell. This is because the lazyF loop is likely to quit, with high probability, with no need to recalculate all the cell values. Since the H values of all cells in the last row of the previous partition are always correct, the correctness of our partitioned vectorized algorithm will be proved if we could prove that the correctness of the F values of all cells in the last row of the previous partition does not affect the correct computation of F values of all cells in the first row of the current partition. In the following, we will prove that the F values of all cells in the first row of the current partition can always be correctly calculated.
Theorem 1. For the partitioned vectorized SW algorithm, the F values of all cells in the first row of the current partition are correctly computed regardless of the correctness of the F values of all cells in the last row of its previous partition.
Proof. Taking cells B and C in Figure 2 as an example, define C_{ F }to denote the F value of C, B_{ H }to denote the H value of B, and B_{ F }to denote the F value of B, where C_{ F }= max(B_{ H } ρ  σ, B_{ F } σ) according to equation (1). For the striped SW algorithm, the correctness of the F value of the last cell for a specific column j in the alignment matrix depends on two possible conditions.
Case 1: the lazyF loop does not stop until the F values of all cells in column j have been corrected because the F value of each cell contributes to its H value. In this case, due to the recalculation of all cells, vecF stores the correct F value of the last cell. Since both B_{ H }and B_{ F }are correct, C_{ F }is definitely correctly calculated.
Case 2: the lazyF loop stops after some iterations with no need to recalculate all cells. This means that the F values of the remaining cells will not contribute to their corresponding H values, but might not be equal to their correct F values directly calculated using equation (1). In this case, because B_{ F } σ ≤ B_{ H } ρ  σ, C_{ F }is equal to B_{ H } ρ  σ so that C_{ F }has no relationship to B_{ F }.
From the above discussion, a conclusion can be drawn that C_{ F }can always be correctly calculated regardless of whether B_{ F }is correct or not. Therefore, the theorem is proven.
The partitioned vectorized algorithm stores the values of vecH and vecE of one column for a partition in registers to achieve peak performance. Using registers, the inner loop and the lazyF loops are manually unrolled according to the number of vector segments. Since the computation of the inner loop is fully unrolled, the access to the striped query profile can be optimized using the packed data format. Like the optimized SIMT algorithm, each numerical string P_{ r }of this query profile is packed and represented using the char 4 vector data type according to the access order of threads comprising a virtualized vector. However, the subject sequences are not packed because we failed to find performance improvement using the packed data format. Figure 3 shows the pseudocode of the CUDA kernel of the partitioned vectorized algorithm.
Results and discussion
We use GCUPS [17] to measure the performance of our algorithms. In this paper, the execution time t includes the transfer time of the query sequences from host to GPU, the calculation time of the SW algorithm, and the time taken to transferback the scores. In addition, when running on multiple GPUs, t also includes the transfer time of database sequences from host memory to GPU, and time required for creating and destroying the host threads.
The performance of CUDASW++ 2.0 is benchmarked and analyzed by searching for 20 sequences of length from 144 to 5,478 against SwissProt release 56.6 (released on Dec. 16, 2008, comprising 146,166,984 amino acids in 405,506 sequences and having the longest sequence of 35,213 amino acids). The tests on a single GPU are carried out on a GeForce GTX 280 (GTX 280) graphics card, with 30 SMs comprising 240 SPs and 1 GB RAM, installed in a PC with an AMD Opteron 248 2.2 GHz processor running the Linux OS. The multiple GPU tests are carried out on a GeForce GTX 295 (GTX 295) graphics card with two G200 GPUchips on a single card, which consists of 480 SPs (240 SPs per GPU) and 1.8 GB RAM, installed in a PC with an Intel i 7 quadcore 2.67 GHz processor running the Linux OS. This graphics card has a slightly lower clock frequencies compared to GTX 280.
The performance of the optimized SIMT algorithm has no relationship with the substitution matrix and gap penalties used, whereas the two vectorized algorithms are sensitive to them. Generally, for a specific substitution matrix, the higher the gap open and gap extension penalties, the higher the performance. This is because fewer iterations are needed to recalculate F in the lazyF loop. Since the BLOSUM family of substitution matrices, particularly BLOSUM62, is the de facto standard in protein database searches and sequence alignments, if not specified, all the tests in this paper use BLOSUM62 as the substitution matrix by default. The optimized SIMT algorithm exploits a gap penalty of 102 k, and the two vectorized algorithms use several different gap penalties to check the runtime characteristics. For the optimized SIMT algorithm, maximal performance is achieved for a thread block size of 256 threads and a grid size equal to 4× the number of SMs; for the basic vectorized algorithm, maximal performance is achieved using VL equal to warp size (i.e. 32) for a thread block of 256 threads and a grid size equal to 64× the number of SMs; and for the partitioned vectorized algorithm, maximal performance is achieved using PL equal to 256 and VL equal to halfwarp size (i.e. 16) for a thread block of 192 threads and a grid size equal to 128× the number of SMs. The basic vectorized algorithm produces much lower performance than the partitioned vectorized algorithm for several different gap penalties. Additional file 5 shows the performance percentage ratio of the basic vectorized algorithm to the partitioned vectorized one for different gap penalties on a single GPU. Hence, the basic vectorized algorithm is excluded from the release of CUDASW++ 2.0.
The optimized SIMT algorithm achieves an average performance of 16.5 (27.2) GCUPS with a highest of 16.9 (28.8) GCUPS on GTX 280 (GTX 295). The partitioned vectorized algorithm achieved an average performance of 15.3 (22.9) GCUPS with a highest of 16.3 (27.0) GCUPS using a gap penalty of 102 k; an average performance of 16.3 (24.8) GCUPS with a highest of 17.6 (29.6) GCUPS using a gap penalty of 202 k; and an average performance of 16.8 (26.2) GCUPS with a highest of 17.8 (29.7) GCUPS using a gap penalty of 403 k on GTX 280 (GTX 295). The runtime (in seconds) and GCUPS of the optimized SIMT and partitioned vectorized algorithms on GTX 280 and GTX 295 is shown in Tables 1 and 2, respectively. From the tables, it can be seen that the optimized SIMT algorithm produces reasonably stable performance, while the performance of the partitioned vectorized algorithm shows some small fluctuations around the average performance, increasing with the increase of the gap open and gap extension penalties. On GTX 280, the optimized SIMT algorithm slightly outperforms the partitioned vectorized algorithm using a gap penalty of 102 k, has nearly the same performance with the latter using a gap penalty of 202 k, but is slightly outperformed when using a gap penalty of 403 k. On GTX 295, the optimized SIMT algorithm has a slightly higher average performance than the partitioned vectorized algorithm using any of the three gap penalties, but has a lower highest performance when using gap penalties of 202 k and 403 k. This indicates that these two algorithms have remarkably similar performance characteristics.
We next compare CUDASW++ 2.0 to CUDASW++ 1.0. CUDASW++ 1.0 is rebenchmarked on the same platforms as used for CUDASW++ 2.0. Since the performance of CUDASW++ 1.0 is not affected by the choice of substitution matrix and gap penalty, we use BLOSUM62 with a gap penalty of 102 k for all tests. Figure 4 and Figure 5 show the performance comparison between CUDASW++ 1.0 and CUDASW++ 2.0 on GTX 280 and GTX 295, respectively. On average, compared to CUDASW++ 1.0, the optimized SIMT algorithm runs about 1.74 (1.72) times faster on GTX 280 (GTX 295); the partitioned vectorized algorithm runs about 1.58 (1.45) times faster using a gap penalty of 102 k, about 1.72 (1.57) times faster using a gap penalty of 202 k, and about 1.77 (1.66) times faster using a gap penalty of 403 k on GTX 280 (GTX 295). Hence, CUDASW++ 2.0 obtains significant performance improvement over CUDASW++ 1.0 using either the optimized SIMT or the partitioned vectorized algorithms running on the same platforms.
We decided not to include comparisons with the following publicly available SW implementations: SWPS3, SWCUDA, and CBESW, as CUDASW++ 1.0 significantly outperforms them. Now, we compare the performance between CUDASW++ 2.0 and NCBIBLAST (version 2.2.22+). NCBIBLAST is rebenchmarked on the above PC with an Intel i 7 quadcore processor. The substitution matrices BLOSUM62 with a gap penalty of 102 k and BLOSUM50 with a gap penalty of 103 k are used for the tests. All the other parameters are used by default. To demonstrate the power of CUDASW++ 2.0 for long query sequences, we build a subset of SwissProt release 56.6 database, which contains all the sequences of lengths ≥ 2000 in the database. This subset comprises 5,670,072 amino acids in 1,875 sequences. Performance is compared by searching all sequences in this subset against the SwissProt database. As mentioned above that the performance of CUDASW++ 1.0 and the optimized SIMT algorithm of CUDASW++ 2.0 has no relationship with the substitution matrix and gap penalties used, we just test them using BLOSUM62 with a gap penalty of 102 k. Table 3 shows the runtime (in hours) and average GCUPS of CUDASW++ 1.0, CUDASW++ 2.0 and NCBIBLAST, where CUDASW++ 1.0 and 2.0 are benchmarked on GTX 295. From the table, CUDASW++ 2.0 using the optimized SIMT algorithm produces the best performance, taking 8.00 hours to complete the searching and achieving an average of 28.8 GCUPS. NCBIBLAST using BLOSUM50 and a gap penalty of 103 k produces the worst performance, taking up to 51.45 hours and achieving only an average of 4.5 GCUPS. Even though the partitioned vectorized algorithm gives lower performance than the optimized SIMT algorithm due to the use of smaller gap penalties, it still significantly outperforms CUDASW++ 1.0 and NCBIBLAST that uses BLOSUM50 and a gap penalty of 103 k. Hence, the overall performance of CUDASW++ 2.0 is significantly better as compared with CUDASW++ 1.0 and NCBIBLAST.
Conclusions
In this paper, we have presented our new contributions to SW database searches using CUDA, through the latest release of the CUDASW++ 2.0 software targeted for CUDAenabled GPUs with compute capability 1.2 and higher. An optimized SIMT SW algorithm is suggested to further optimize the performance of CUDASW++ 1.0 based on the SIMT abstraction of CUDAenabled GPUs. For the first time we have investigated a partitioned vectorized SW algorithm using CUDA based on the virtualized SIMD abstraction of CUDAenabled GPUs. This virtualized SIMD vector programming model provides guidance for designing other bioinformatics algorithms, such as pairwise distance computation in ClustalW [21, 22], using SIMD vectorization for CUDAenabled GPUs. The optimized SIMT and the partitioned vectorized algorithms have remarkably similar performance characteristics when benchmarked by searching the SwissProt release 56.6 database with query sequences of length varying from 144 to 5,478. The optimized SIMT algorithm produces reasonably stable performance, while the partitioned vectorized algorithm has some small fluctuations around the average performance for a specific gap penalty, increasing with the increase of the gap open and gap extension penalties. CUDASW++ 2.0 provides direct support for multiple GPU devices installed in a single host. It obtains significant performance improvement over CUDASW++ 1.0 using either the optimized SIMT algorithm or the partitioned vectorized algorithm on the same platform, achieving a highest performance of up to 17 (30) GCUPS on GTX 280 (GTX 295).
Even though the optimal alignment scores of the SW algorithm can be used to detect related sequences, the scores are biased by sequence length and composition. The Zvalue [23–25] has been proposed to estimate the statistical significance of these scores. However, the computation of Zvalue requires the calculating of a large set of pairwise alignments between random permutations of the sequences compared, which is highly timeconsuming. The acceleration of Zvalue computation with CUDA is therefore part of our future work.
Availability and requirements

Project name: CUDASW++

Project home page: http://cudasw.sourceforge.net/

Operating System: Linux

Programming language: CUDA and C++

Other requirements: CUDA SDK and Toolkits 2.0 or higher; CUDAenabled GPUs with compute capability 1.2 and higher

License: none
Abbreviations
 CPU:

Central Processing Unit
 CUDA:

Compute Unified Device Architecture
 Cell/BE:

Cell Broadband Engine Architecture
 FPGA:

FieldProgrammable Gate Array
 GCPUS:

Billion Cell Updates per Second
 GPU:

Graphics Processing Unit
 GTX 280:

NVIDIA GeForce GTX 280
 GTX 295:

NVIDIA GeForce GTX 295
 OpenGL:

Open Graphics Library
 OS:

Operating System
 PBSM:

Perblock Shared Memory
 PC:

Personal Computer
 RAM:

Random Access Memory
 SIMD:

Single Instruction Multiple Data
 SIMT:

Singleinstruction, Multiplethread
 SM:

Streaming Multiprocessor
 SP:

Scalar Processor
 SSE2:

Streaming SIMD Extensions 2
 SW:

SmithWaterman.
References
 1.
Smith T, Waterman M: Identification of common molecular subsequences. J Molecular Biology. 1981, 147: 195197. 10.1016/00222836(81)900875.
 2.
Gotoh O: An improved algorithm for matching biological sequences. J Mol Biol. 1982, 162: 707708. 10.1016/00222836(82)903989.
 3.
Pearson WR, Lipman DJ: Improved tools for biological sequence comparison. Proc Nat Acad Sci USA. 1988, 85 (8): 24442448. 10.1073/pnas.85.8.2444.
 4.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ: Basic local alignment search tool. J Mol Biol. 1990, 215 (3): 403410.
 5.
Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, Miller W, Lipman DJ: Gapped BLAST and PSIBLAST: a new generation of protein database search programs. Nucleic Acids Res. 1997, 25 (17): 33893402. 10.1093/nar/25.17.3389.
 6.
Oliver T, Schmidt B, Nathan D, Clemens R, Maskell D: Using reconfigurable hardware to accelerate multiple sequence alignment with ClustalW. Bioinformatics. 2005, 21 (16): 34313432. 10.1093/bioinformatics/bti508.
 7.
Oliver T, Schmidt B, Maskell DL: Reconfigurable architectures for biosequence database scanning on FPGAs. IEEE Trans Circuit Syst II. 2005, 52: 851855. 10.1109/TCSII.2005.853340.
 8.
Li TI, Shum W, Truong K: 160fold acceleration of the SmithWaterman algorithm using a field programmable gate array (FPGA). BMC Bioinformatics. 2007, 8: I8510.1186/14712105885.
 9.
Wozniak A: Using videooriented instructions to speed up sequence comparison. Comput Appl Biosci. 1997, 13 (2): 145150.
 10.
Rognes T, Seeberg E: Sixfold speedup of SmithWaterman sequence database searches using parallel processing on common microprocessors. Bioinformatics. 2000, 16 (8): 699706. 10.1093/bioinformatics/16.8.699.
 11.
Farrar M: Striped SmithWaterman speeds database searches six times over other SIMD implementations. Bioinformatics. 2007, 23 (2): 156161. 10.1093/bioinformatics/btl582.
 12.
Farrar MS: Optimizing SmithWaterman for the Cell broadband engine. [http://farrar.michael.googlepages.com/SWCellBE.pdf]
 13.
Szalkowski A, Ledergerber C, Krahenbuhl P, Dessimoz C: SWPS3  fast multithreaded vectorized SmithWaterman for IBM Cell/B.E. and ×86/SSE2. BMC Research Notes. 2008, 1: 10710.1186/175605001107.
 14.
Wirawan A, Kwoh CK, Hieu NT, Schmidt B: CBESW: sequence alignment on Playstation 3. BMC Bioinformatics. 2008, 9: 37710.1186/147121059377.
 15.
Liu W, Schmidt B, Voss G, MullerWittig W: Streaming algorithms for biological sequence alignment on GPUs. IEEE Transactions on Parallel and Distributed Systems. 2007, 18 (9): 12701281. 10.1109/TPDS.2007.1059.
 16.
Manavski SA, Valle G: CUDA compatible GPU cards as efficient hardware accelerators for SmithWaterman sequence alignment. BMC Bioinformatics. 2008, 9 (Suppl 2): S1010.1186/147121059S2S10.
 17.
Liu Y, Maskell DL, Schmidt B: CUDASW++: optimizing SmithWaterman sequence database searches for CUDAenabled graphics processing units. BMC Research Notes. 2009, 2: 7310.1186/17560500273.
 18.
Nickolls J, Buck I, Garland M, Skadron K: Scalable parallel programming with CUDA. ACM Queue. 2008, 6 (2): 4053. 10.1145/1365490.1365500.
 19.
Lindholm E, Nickolls J, Oberman S, Montrym J: NVIDIA Tesla: A unified graphics and computing architecture. IEEE Micro. 2008, 28 (2): 3955. 10.1109/MM.2008.31.
 20.
NVIDIA CUDA programming guide version 2.0. [http://developer.download.nvidia.com/compute/cuda/2_0/docs/NVIDIA_CUDA_Programming_Guide_2.0.pdf]
 21.
Thompson JD, Higgins DG, Gibson TJ: CLUSTALW: improving the sensitivity of progressive multiple sequence alignment through sequence weighting, positionspecific gap penalties and weight matrix choice. Nucleic Acids Res. 1994, 22: 46734680. 10.1093/nar/22.22.4673.
 22.
Larkin MA, Blackshields G, Brown NP, Chenna R, McGettigan PA, McWilliam H, Valentin F, Wallace1 IM, Wilm A, Lopez R, Thompson JD, Gibson JD, Higgins DG: Clustal W and Clustal X version 2.0. Bioinformatics Applications Note. 2007, 23 (21): 29472948.
 23.
Comet JP, Aude JC, Glémet E, Risler JL, Hénaut A, Slonimski PP, Codani JJ: Significance of Zvalue statistics of SmithWaterman scores for protein alignments. Computers & Chemistry. 1999, 23 (34): 317331.
 24.
Bastien O, Aude JC, Roy S, Maréchal E: Fundamentals of massive automatic pairwise alignments of protein sequences: theoretical significance of Zvalue statistics. Bioinformatics. 2004, 20 (4): 534537. 10.1093/bioinformatics/btg440.
 25.
Peris G, Marzal A: A Screening Method for ZValue Assessment Based on the Normalized Edit Distance. Lecture Notes in Computer Science. 2009, 5518: 11541161. full_text.
Acknowledgements
The authors would like to thank Dr. Liu Weiguo and Dr. Shi Haixiang for helping to provide the experimental environments for conducting the tests.
Author information
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
YL conceptualized the study, carried out the design and implementation of the algorithm, performed benchmark tests, analyzed the results and drafted the manuscript; BS conceptualized the study, participated in the algorithm optimization and analysis of the results and contributed to the revising of the manuscript; DLM conceptualized the study and contributed to the revising of the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
This article is published under license to BioMed Central Ltd. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Liu, Y., Schmidt, B. & Maskell, D.L. CUDASW++2.0: enhanced SmithWaterman protein database search on CUDAenabled GPUs based on SIMT and virtualized SIMD abstractions. BMC Res Notes 3, 93 (2010) doi:10.1186/17560500393
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/17560500393
Keywords
 Thread Block
 Compute Unify Device Architecture
 Alignment Matrix
 Vectorized Algorithm
 Striped Layout