- Research article
- Open Access
Which clustering algorithm is better for predicting protein complexes?
© Moschopoulos et al; licensee BioMed Central Ltd. 2011
- Received: 21 July 2011
- Accepted: 20 December 2011
- Published: 20 December 2011
Protein-Protein interactions (PPI) play a key role in determining the outcome of most cellular processes. The correct identification and characterization of protein interactions and the networks, which they comprise, is critical for understanding the molecular mechanisms within the cell. Large-scale techniques such as pull down assays and tandem affinity purification are used in order to detect protein interactions in an organism. Today, relatively new high-throughput methods like yeast two hybrid, mass spectrometry, microarrays, and phage display are also used to reveal protein interaction networks.
In this paper we evaluated four different clustering algorithms using six different interaction datasets. We parameterized the MCL, Spectral, RNSC and Affinity Propagation algorithms and applied them to six PPI datasets produced experimentally by Yeast 2 Hybrid (Y2H) and Tandem Affinity Purification (TAP) methods. The predicted clusters, so called protein complexes, were then compared and benchmarked with already known complexes stored in published databases.
While results may differ upon parameterization, the MCL and RNSC algorithms seem to be more promising and more accurate at predicting PPI complexes. Moreover, they predict more complexes than other reviewed algorithms in absolute numbers. On the other hand the spectral clustering algorithm achieves the highest valid prediction rate in our experiments. However, it is nearly always outperformed by both RNSC and MCL in terms of the geometrical accuracy while it generates the fewest valid clusters than any other reviewed algorithm. This article demonstrates various metrics to evaluate the accuracy of such predictions as they are presented in the text below. Supplementary material can be found at: http://www.bioacademy.gr/bioinformatics/projects/ppireview.htm
- Spectral Cluster
- Affinity Propagation
- Valid Cluster
- Geometrical Accuracy
- Tandem Affinity Purification
Proteins are the main actors responsible for virtually every function within a cell. While some proteins are characterized by a unique function, the majority of them operate in coordination with other proteins forming PPI networks to carry out processes in the cell. Such processes include cell cycle control, differentiation, protein folding, signaling, transcription, translation, post-translational modification and transportation. Trying to understand and predict protein functions at a systems level is neither a straightforward nor a trivial task. Due to such issues, which range from wet-lab technical challenges to the innate complexity of high dimensional data analysis, function prediction has become one of the most important and difficult challenges in current computational biology research.
Some of the most well known techniques to reveal information about the interaction of proteins are the pull down assays  and tandem affinity purification . State of the art high-throughput methods such as yeast two hybrid systems--Y2H , mass spectrometry , microarrays  and phage display  are able to generate enormous datasets of PPIs with high quality of information. While the aforementioned techniques are valuable tools to capture the role of molecular functions at a systems level, their main drawback is that the resulting datasets are often incomplete and exhibit high false positive and false negative rates.
In addition to the direct experimental data, a wide range of large biological databases storing information about validated or predicted PPI data is also available. The Yeast Proteome Database--YPD , for example, combines protein-interaction and other data from the literature. A number of other important databases that curate protein and genetic interactions of yeast from the literature have been developed, including the Munich Information Center for Protein Sequences--MIPS database , the Molecular Interactions--MINT database  the IntAct database , the Database of Interacting Proteins--DIP , the Biomolecular Interaction Network Database--BIND , and the BioGRID database . A number of public repositories for human PPIs are currently available, including the databases: BIND , DIP , IntAct , MINT  and MIPS . There exist also organism specific databases such as the Human Protein Reference Database--HPRD  or the HPID  for human or DroID  for Drosophila.
Proteins can either act individually or as a part of bigger system to perform an intricate process in the cell. Thus, proteins often collaborate and form stable associations, termed protein complexes [4, 18, 19]. In a larger network consisting of nodes (proteins) and edges (PPI interactions), a protein complex corresponds to a dense subgraph (aggregation of highly interconnected vertices) or even a clique. Identification of such complexes in PPI graphs is an important challenge and can be of valuable help in understanding the cell functions. Computational methods such as MCODE , jClust , Clique , LCMA , DPClus , CMC , SCAN , Cfinder , GIBA  or PCP  are graph-based algorithms that use graph theory to detect highly connected subnetworks. DECAFF , SWEMODE  or STM  have been developed to predict protein complexes incorporating graph annotations, whereas others like DMSP , GFA  and MATISSE  take also the gene expression data into account. A very useful review article that describes and compares the aforementioned techniques can be found in .
In this study, we to go one step further than  and benchmark four different clustering algorithms against six different datasets not covered in  to evaluate how well widely used clustering algorithms like the aforementioned can predict protein complexes from PPI data. The algorithms which we tested include the MCL , RNSC , Affinity Propagation  and Spectral clustering . All these algorithms assign each protein of the PPI graph to a cluster. The datasets used are: Tong , Krogan , Gavin 2002 , Gavin 2006 , DIP  and the MIPS . To evaluate the accuracy and the percentage of valid predictions of the algorithms against the specific datasets we used the MIPS  and the set of complexes derived from  as benchmarks.
Data preparation integration
In this section, we give a short description of the datasets that were used in this study. All of the current datasets hold information about unweighted PPI associations.
Tong dataset 
This network consists of 7430 edges and 2262 vertices. A genetic interaction network was mapped by crossing mutations in several genes into a set of viable gene yeast deletion mutants scoring the double mutant progeny for fitness defects. The interactions of this network were produced by predicting the functions of the interactive elements. These elements are often produced by bringing together functionally related genes, components, or proteins that belong to the same pathway. The genetic network exhibited dense local neighbourhoods.
Krogan dataset 
This dataset consists of 7088 edges and 2675 vertices and contains different tagged proteins of the yeast Saccharomyces cerevisiae organism. In the original article, the MCL  algorithm was used to cluster and organize the proteins into several groups.
Gavin 2002  dataset consists of 3210 edges and 1352 vertices, whereas Gavin 2006  consists of 6531 edges and 1430 vertices. In the first dataset, large-scale tandem affinity purification and mass spectrometry were used to characterize multi-protein complexes in Saccharomyces cerevisiae. Extending this information to the human genome, this dataset provides an outline of the eukaryotic proteome as a network of protein complexes. Using the whole network, we try to see how successfully the various methods detect the network complexes. The second dataset contains the first genome-wide screen for complexes in yeast.
DIP dataset 
The Database of Interacting Proteins (DIP) stores experimentally validated protein-protein interactions. We used this database to isolate a network of 17491 edges and 4934 vertices. We included this dataset for our experiments because, aside from protein-protein interactions, the DIP database provides abundant annotations to allow deeper understand of the protein functions.
MIPS dataset 
The Munich Information Center for Protein Sequences (MIPS) provides resources mainly related to genome information. Most of the databases that store evidences about a diversity of genomes of distinctive organisms are manually curated. In addition, 400 genomes, which are annotated automatically, are also integrated. In this case study, the network consists of 12526 edges and 4554 vertices given by the MIPS database.
It should be noted that our experiments for testing clustering algorithms are strictly limited to unweighted PPI datasets. Other kinds of protein interactions (Enzyme-Inhibitor and antigen-antibody) concern specific subcategories of interactions that can not form large scale networks as PPI datasets do. For example, the two datasets of antigen-antibody complexes presented in  could not be used in our survey as they contain very few data points and are derived from different organisms. It is notable that RNSC algorithm does not take edge weights into account in its function.
The algorithms, used here, to predict protein complexes include the MCL , RNSC , affinity propagation  and spectral clustering . The decision to include these algorithms in our setting was reached due to the fact that they are widely used but also because they perfectly complement the study carried out in . We wish to make clear that we did not evaluate any algorithms for clique detections since such algorithms specialize in detecting fully connected sub-areas of the network. Such a comparison would be unfair since clustering techniques tend to predict a much higher number of complexes, and often detect the cliques. For the MCL and RNSC algorithms, the original versions were used. These can be found at: http://micans.org/mcl/ and http://rsat.bigre.ulb.ac.be/rsat/index_neat.html respectively. For the spectral clustering and affinity propagation algorithms we used the versions incorporated within the jClust  application. Below we give some information about the main concept that the algorithms are based on.
The MCL algorithm is a fast and scalable unsupervised clustering algorithm. It is one of the most widely used algorithms and is it is based on simulating stochastic flows in networks. The MCL algorithm can detect cluster structures in graphs by taking advantage of a mathematical bootstrapping procedure. The process is trying to perform random walks through a graph and deterministically compute their probabilities to find the best paths. It does so by using stochastic Markov matrices. The algorithm works by alternating the inflation parameter, which iteratively calculate the set of transition probabilities. The inflation operator implements a stochastic matrix transformation to emphasize larger probabilities and deemphasize smaller ones.
The RNSC algorithm initially searches for a low cost clustering by initializing a random clustering. It then iteratively assigns nodes to different clusters randomly to improve the clustering cost. In order to avoid local minima, RNSC makes diversification note transfers and performs multiple experiments. Furthermore, it maintains dynamic data structures to prevent exploring back a previously visited partitioning. The functionality of the RNSC algorithm depends on various parameters needed for the Tabu search step (Tabu length and Tabu list tolerance), as well as the terminating criteria (naïve stopping tolerance and scaled stopping tolerance) and other (maximal number of clusters, diversification frequency and shuffling diversification length). Further analysis concerning these parameters can be found in .
Affinity Propagation 
Affinity propagation is an unsupervised algorithm and thus the number of clusters are automatically calculated. The idea behind this algorithm is to find sub-paths, which allow easy message exchanges between nodes. It takes as input a similarity matrix, which keeps the distances between all possible pairs of data points whereas it initially considers all data points as potential "exemplars". In later steps, real-valued messages are exchanged between the nodes until a set of exemplars and corresponding clusters emerges with high quality. The main parameter of this algorithm is the 'preference', which controls how many data points are selected as exemplars.
Spectral clustering 
This algorithm tries to detect clusters in a graph, where nodes are connected with highly-similarity. The algorithm also tries to find connections between such areas that should be weak, constituted by edges of low similarity. The aim is to identify highly connected clusters and, at a later stage, filter the inter edges within the cluster. The only parameter required is the user-defined number of clusters.
To evaluate the algorithms against specific datasets that already contain information about recorded protein complexes we used the MIPS  database and the set of complexes derived from  (denoted as BT_409) as benchmarks. Concerning the MIPS protein complexes dataset, we observed that often information is stored in a hierarchical structure. To avoid redundancies, the parent complexes were discarded and the sub-complexes were retained. The final evaluation dataset comprises 220 complexes. The BT_409 dataset similarly contains 409 complexes and is composed by applying a bootstrapping strategy on tandem affinity purification data. It and has been also used as a benchmark dataset in other studies such as .
To determine whether a sub-graph represents a protein complex or not, we compared each derived cluster against every recorded protein complex in the MIPS or BT_409 dataset. We used the same evaluation metric adopted in , called the geometric similarity index. This method considers a predicted complex as valid if , where I is the number of common proteins, A the number of proteins in the predicted complex and B the number of proteins in the recorded complex. Finally, we kept the highest geometric similarity index (score), which a predicted cluster achieved over the recorded ones.
N i indicates the number of proteins belonging to recorded complex i and T j indicates the total number of members of j predicted complex assigned to all benchmark complexes. These metrics are widely used to measure the correspondence between the result of a classification and a reference and to provide an overview of how accurately the clustering techniques can detect the protein complexes from PPI data.
The aforementioned metrics come with their strengths and their limitations. In the case of sensitivity (Sn), if a method predicts very big complexes with many proteins, the Sn score will tend to have very high values. The PPV value on the other hand, does not evaluate overlapping clusters properly. In addition, all of the evaluation metrics described above assume that a complete set of real protein complexes is available, but this does not necessarily corresponds to the real experimental data.
Finally, two more metrics were used for our evaluation procedure. These are the absolute number of predictions and the mean score of valid predicted complexes. The absolute number of predicted clusters is a metric that measures the efficiency of the tested algorithms to identify as many protein complexes as possible in a PPI graph. This metric varies as the datasets tested vary regarding their density and the number of protein complexes which they contain. The absolute number of valid predictions is represented as a/b where a is the number of valid predicted complexes and b the total number of the derived clusters. The mean score of valid predicted clusters indicates the mean geometric similarity index of the predicted clusters that surpass the threshold of 0.2. This metric is used in order to measure how well a recorded complex is predicted by the algorithms tested.
Extensive experiments to compare the aforementioned techniques were performed. The comparison of these methods is less biased than in other reviews so far such as [36, 46] where different types of algorithms based on different clustering approaches are compared with each other, which can be misleading.
During the first step of our experiment, the four algorithms are applied on the six aforementioned datasets and the resulting clusters are compared respectively. During the second step, the results of the tested algorithms are filtered according to the methodology introduced in . A thorough analysis was performed to show the consequence of the post-clustering filter parameters on each of the tested algorithms and how they can affect the final results. For our experiments, a wide range of values and parameters for the algorithms parameters was essayed. However, it must be noted that there is no strict way to set the algorithms parameters in order to produce the optimal results for every dataset. For instance, the MCL algorithm produces higher valid prediction rates, which means that the percentage of valid predicted clusters to total in the MCL results is higher, when the inflation parameter is set to 1.8 and higher accuracy rates when it is set to 2. In order to compare MCL results with other algorithms we used those produced by MCL when the inflation parameter is set to 1.8. More information concerning the MCL algorithm behavior across different values of the inflation parameter, can be found in Additional File 1. For the affinity propagation algorithm, we used the scripts (preferenceRange.m and apclusterK.m) which are available at . In order to determine the parameters of the algorithm we used the eigengap heuristic  which searches the structure of the network in order to automatically elucidate the number of clusters in the network. Finally, for the RNSC algorithm we used the values presented in [36, 46] due to the numerous parameters that this algorithm uses.
In order to check the robustness of the tested algorithms against noise, we performed experiments with 3 altered datasets presented in . The results are presented in Additional File 1, Table S5, and each dataset is noted as complexes_rm_i_ad_j, where i and j indicate the percentage of deleted and added edges respectively to the PPI graph formed by the collection of MIPS recorded protein complexes.
We performed extensive experiments using four different algorithmic strategies to detect protein complexes in six PPI networks. For the evaluation process, two different evaluations sets were used. These were a) the golden standard of MIPS recorded protein complexes and b) the BT_409 dataset.
In the cases where the MIPS dataset was used for evaluation, the spectral clustering algorithm achieved the highest performance with respect to the percentage of valid predictions compared to the other algorithms. On the other hand, the RNSC and MCL algorithms were the methods that clearly generated the most valid clusters. Regarding the BT_409 evaluation set (see Figure 1b), the RNSC algorithm performs as well as the spectral clustering whereas in some cases it surpasses it. The MCL and RNSC algorithms performed best according to Acc_g metric. These algorithms produced high quality results as the derived clusters match more accurately the recorded protein complexes in MIPS and BT_409 evaluation sets.
According to our results, in line with , the RNSC algorithm behaved better than the other algorithms. It produced many valid clusters whereas in almost all datasets it was ranked as the second best algorithm with respect to the percentage of the valid predictions (in some cases surpassed spectral clustering algorithm) as this can be seen in Figure 1. It should be noted that, if the affinity propagation algorithm would be excluded, the difference concerning the geometrical accuracy between the RNSC and the other two algorithms (MCL and spectral clustering) would not be as big as the difference between the affinity propagation algorithm and the others (MCL and spectral clustering).
The MCL and RNSC algorithms performed similarly but in most cases, RNSC surpassed the MCL algorithm by giving higher valid prediction rate. However, both algorithms achieved high accuracy and high absolute number of valid predicted clusters in all datasets compared to the rest of the algorithms. On the other hand, the MCL algorithm performed better in most cases comparing to tother methods with respect to the mean score of valid predicted complexes which shows a mean geometric similarity index of the predicted clusters that surpass the threshold of 0.2. This metric was used in order to measure how well a recorded complex is predicted by the algorithms tested.
The Affinity propagation algorithm seemed to have lower performance than the rest of the tested algorithms. The number of iterations was set to the dataset size. A direct and more generic comparison between the Affinity propagation and the MCL algorithms can be found at .
Finally, regarding the robustness of the algorithms against noise, the spectral clustering and RNSC algorithms performed best as it can be seen in Table S5 of the Additional File 1. More specifically, spectral clustering algorithm achieved the highest percentage of successful predictions while the RNSC algorithm achieved the highest performance with respect to the geometrical accuracy metric and the absolute number of valid predicted clusters. The affinity propagation algorithm seems to be the most sensitive to the noisiness of the data. On the other hand, the MCL algorithm can be considered as the most stable one and performs best when the noise in the data becomes inordinate.
All the results of our experiments with the varying post-cluster filtering parameters are presented in Additional file 2 and Additional file 3. As expected, the density method has the biggest affect concerning the number of the final clusters of each algorithm than any other filtering method. The higher the value of this parameter, the fewer the clusters, which were generated by the tested algorithms that could pass the filter, are. The Gavin 2006 and Krogan datasets are the best examples for the algorithm to be applied on, since they generated more clusters comparing to any other dataset. On the other hand, the Tong dataset, due to its sparseness, does not help the algorithms to achieve high prediction rate or absolute number of valid clusters. When the filtering step is added, all of the algorithms produce extremely few clusters but with a higher probability of these clusters to be valid.
Going one step further, we compared the five best performances of each algorithm combined with the post-cluster filtering process which also produced more than ten final and more than three valid clusters. Had this not been carried out, the comparison would be biased because, for an example, one algorithm would produce only one valid cluster, which would have 100% score according to the geometrical accuracy metric. Only in one case where affinity propagation algorithm was evaluated against the MIPS golden standard dataset, there were no results that could satisfy the above prerequisites. All of the results can be found in Additional file 4: where the geometrical accuracy and the absolute number of valid predicted clusters are plotted.
The first conclusion, which can be derived, is that all algorithms achieved much higher values for geometrical accuracy metric. Regarding the experiments performed which use MIPS golden standard as evaluation set; in most of the cases the affinity propagation algorithm achieves the highest mean geometrical accuracy. However, this can be explained by the fact that the best results achieved by affinity propagation algorithm produce fewer valid clusters than any other algorithm. On the other hand, the RNSC algorithm seems to achieve poorer performance for geometrical accuracy but, together with MCL algorithm, they produce the most valid predicted clusters.
When the evaluation set used is the BT_409 dataset, the spectral clustering and the RNSC algorithms achieve the best performance based on geometrical accuracy metric. Concerning the absolute number of valid predictions, the MCL and RNSC algorithms produced the highest scores. Notably, all algorithms achieved higher accuracy values for BT_409 dataset while their final valid clusters where approximately equal to those produced when the MIPS golden standard dataset was used.
Filter method parameters values, which generally produced good results
Six PPI network datasets were subjected to four different algorithmic strategies. The motivation behind this approach is to benchmark the clustering techniques and measure their prediction accuracy to detect protein complexes. For the evaluation process, two different evaluations sets were used. It is notable that we evaluated algorithms that share similar concepts to cluster networks. After essaying various parameters for the aforementioned algorithms we found that the RNSC and MCL algorithms are more accurate in predicting PPI complexes as they outperformed the other algorithms concerning the geometrical accuracy metric and the mean score of valid predicted complexes. In contrast, the spectral clustering algorithm achieves the highest valid prediction rate in our experiments but fails to surpass the RNSC and MCL algorithms concerning the geometrical accuracy metric and the absolute number of the valid predicted clusters.
We acknowledge institutional funds (BRFAA) supporting the publishing of this work. Research carried out in the context of this paper has been partially funded by the EDGE (National Network for Genomic Research) EU and Greek State co-funded Project (09SYN-13-901 EPAN II Co-operation grant). SK is a member of the COST action, BM1006 (Next Generation Sequencing Data Analysis Network). GAP was financially supported as a postdoctoral fellow from the Greek State Scholarship Foundation (I.K.Y--http://www.iky.gr/IKY/portal/en). We would also like to acknowledge Research Council KUL: KUL PFV/10/016 SymBioSys and Flemish Government (IBBT) for supporting this publication.
- Vikis HG, Guan KL: Glutathione-S-transferase-fusion based assays for studying protein-protein interactions. Methods Mol Biol. 2004, 261: 175-186.PubMedGoogle Scholar
- Puig O, Caspary F, Rigaut G, Rutz B, Bouveret E, Bragado-Nilsson E, Wilm M, Seraphin B: The tandem affinity purification (TAP) method: a general procedure of protein complex purification. Methods. 2001, 24 (3): 218-229. 10.1006/meth.2001.1183.PubMedView ArticleGoogle Scholar
- Ito T, Chiba T, Ozawa R, Yoshida M, Hattori M, Sakaki Y: A comprehensive two-hybrid analysis to explore the yeast protein interactome. Proc Natl Acad Sci USA. 2001, 98 (8): 4569-4574. 10.1073/pnas.061034498.PubMedPubMed CentralView ArticleGoogle Scholar
- Gavin AC, Bosche M, Krause R, Grandi P, Marzioch M, Bauer A, Schultz J, Rick JM, Michon AM, Cruciat CM, et al: Functional organization of the yeast proteome by systematic analysis of protein complexes. Nature. 2002, 415 (6868): 141-147. 10.1038/415141a.PubMedView ArticleGoogle Scholar
- Stoll D, Templin MF, Bachmann J, Joos TO: Protein microarrays: applications and future challenges. Curr Opin Drug Discov Devel. 2005, 8 (2): 239-252.PubMedGoogle Scholar
- Willats WG: Phage display: practicalities and prospects. Plant Mol Biol. 2002, 50 (6): 837-854. 10.1023/A:1021215516430.PubMedView ArticleGoogle Scholar
- Hodges PE, McKee AH, Davis BP, Payne WE, Garrels JI: The Yeast Proteome Database (YPD): a model for the organization and presentation of genome-wide functional data. Nucleic Acids Res. 1999, 27 (1): 69-73. 10.1093/nar/27.1.69.PubMedPubMed CentralView ArticleGoogle Scholar
- Mewes HW, Amid C, Arnold R, Frishman D, Guldener U, Mannhaupt G, Munsterkotter M, Pagel P, Strack N, Stumpflen V, et al: MIPS: analysis and annotation of proteins from whole genomes. Nucleic Acids Res. 2004, 32 (Database issue): D41-D44.PubMedPubMed CentralView ArticleGoogle Scholar
- Zanzoni A, Montecchi-Palazzi L, Quondam M, Ausiello G, Helmer-Citterich M, Cesareni G: MINT: a Molecular INTeraction database. FEBS Lett. 2002, 513 (1): 135-140. 10.1016/S0014-5793(01)03293-8.PubMedView ArticleGoogle Scholar
- Kerrien S, Alam-Faruque Y, Aranda B, Bancarz I, Bridge A, Derow C, Dimmer E, Feuermann M, Friedrichsen A, Huntley R, et al: IntAct--open source resource for molecular interaction data. Nucleic Acids Res. 2007, 35 (Database issue): D561-D565.PubMedPubMed CentralView ArticleGoogle Scholar
- Xenarios I, Rice DW, Salwinski L, Baron MK, Marcotte EM, Eisenberg D: DIP: the database of interacting proteins. Nucleic Acids Res. 2000, 28 (1): 289-291. 10.1093/nar/28.1.289.PubMedPubMed CentralView ArticleGoogle Scholar
- Bader GD, Donaldson I, Wolting C, Ouellette BF, Pawson T, Hogue CW: BIND--the biomolecular interaction network database. Nucleic Acids Res. 2001, 29 (1): 242-245. 10.1093/nar/29.1.242.PubMedPubMed CentralView ArticleGoogle Scholar
- Stark C, Breitkreutz BJ, Reguly T, Boucher L, Breitkreutz A, Tyers M: BioGRID: a general repository for interaction datasets. Nucleic Acids Res. 2006, 34 (Database issue): D535-D539.PubMedPubMed CentralView ArticleGoogle Scholar
- Pagel P, Kovac S, Oesterheld M, Brauner B, Dunger-Kaltenbach I, Frishman G, Montrone C, Mark P, Stumpflen V, Mewes HW, et al: The MIPS mammalian protein-protein interaction database. Bioinformatics. 2005, 21 (6): 832-834. 10.1093/bioinformatics/bti115.PubMedView ArticleGoogle Scholar
- Keshava Prasad TS, Goel R, Kandasamy K, Keerthikumar S, Kumar S, Mathivanan S, Telikicherla D, Raju R, Shafreen B, Venugopal A, et al: Human protein reference database-2009 update. Nucleic Acids Res. 2009, 37 (Database issue): D767-D772.PubMedPubMed CentralView ArticleGoogle Scholar
- Han K, Park B, Kim H, Hong J, Park J: HPID: the human protein interaction database. Bioinformatics. 2004, 20 (15): 2466-2470. 10.1093/bioinformatics/bth253.PubMedView ArticleGoogle Scholar
- Yu J, Pacifico S, Liu G, Finley RL: DroID: the Drosophila interactions database, a comprehensive resource for annotated gene and protein interactions. BMC Genomics. 2008, 9: 461-10.1186/1471-2164-9-461.PubMedPubMed CentralView ArticleGoogle Scholar
- Alberts B: The cell as a collection of protein machines: preparing the next generation of molecular biologists. Cell. 1998, 92 (3): 291-294. 10.1016/S0092-8674(00)80922-8.PubMedView ArticleGoogle Scholar
- Gavin AC, Aloy P, Grandi P, Krause R, Boesche M, Marzioch M, Rau C, Jensen LJ, Bastuck S, Dumpelfeld B, et al: Proteome survey reveals modularity of the yeast cell machinery. Nature. 2006, 440 (7084): 631-636. 10.1038/nature04532.PubMedView ArticleGoogle Scholar
- Bader GD, Hogue CW: An automated method for finding molecular complexes in large protein interaction networks. BMC Bioinformatics. 2003, 4: 2-10.1186/1471-2105-4-2.PubMedPubMed CentralView ArticleGoogle Scholar
- Pavlopoulos GA, Moschopoulos CN, Hooper SD, Schneider R, Kossida S: jClust: a clustering and visualization toolbox. Bioinformatics. 2009, 25 (15): 1994-1996. 10.1093/bioinformatics/btp330.PubMedPubMed CentralView ArticleGoogle Scholar
- Spirin V, Mirny LA: Protein complexes and functional modules in molecular networks. Proc Natl Acad Sci USA. 2003, 100 (21): 12123-12128. 10.1073/pnas.2032324100.PubMedPubMed CentralView ArticleGoogle Scholar
- Li XL, Tan SH, Foo CS, Ng SK: Interaction graph mining for protein complexes using local clique merging. Genome Inform. 2005, 16 (2): 260-269.PubMedGoogle Scholar
- Altaf-Ul-Amin M, Shinbo Y, Mihara K, Kurokawa K, Kanaya S: Development and implementation of an algorithm for detection of protein complexes in large interaction networks. BMC Bioinformatics. 2006, 7: 207-10.1186/1471-2105-7-207.PubMedPubMed CentralView ArticleGoogle Scholar
- Liu G, Wong L, Chua HN: Complex discovery from weighted PPI networks. Bioinformatics. 2009, 25 (15): 1891-1897. 10.1093/bioinformatics/btp311.PubMedView ArticleGoogle Scholar
- Mete M, Tang F, Xu X, Yuruk N: A structural approach for finding functional modules from large biological networks. BMC Bioinformatics. 2008, 9 (Suppl 9): S19-10.1186/1471-2105-9-S9-S19.PubMedPubMed CentralView ArticleGoogle Scholar
- Adamcsek B, Palla G, Farkas IJ, Derenyi I, Vicsek T: CFinder: locating cliques and overlapping modules in biological networks. Bioinformatics. 2006, 22 (8): 1021-1023. 10.1093/bioinformatics/btl039.PubMedView ArticleGoogle Scholar
- Moschopoulos CN, Pavlopoulos GA, Schneider R, Likothanassis SD, Kossida S: GIBA: a clustering tool for detecting protein complexes. BMC Bioinformatics. 2009, 10 (Suppl 6): S11-10.1186/1471-2105-10-S6-S11.PubMedPubMed CentralView ArticleGoogle Scholar
- Chua HN, Ning K, Sung WK, Leong HW, Wong L: Using indirect protein-protein interactions for protein complex prediction. J Bioinform Comput Biol. 2008, 6 (3): 435-466. 10.1142/S0219720008003497.PubMedView ArticleGoogle Scholar
- Li XL, Foo CS, Ng SK: Discovering protein complexes in dense reliable neighborhoods of protein interaction networks. Comput Syst Bioinformatics Conf. 2007, 6: 157-168.PubMedView ArticleGoogle Scholar
- Lubovac Z, Gamalielsson J, Olsson B: Combining functional and topological properties to identify core modules in protein interaction networks. Proteins. 2006, 64 (4): 948-959. 10.1002/prot.21071.PubMedView ArticleGoogle Scholar
- Cho YR, Hwang W, Ramanathan M, Zhang A: Semantic integration to identify overlapping functional modules in protein interaction networks. BMC Bioinformatics. 2007, 8: 265-10.1186/1471-2105-8-265.PubMedPubMed CentralView ArticleGoogle Scholar
- Maraziotis IA, Dimitrakopoulou K, Bezerianos A: Growing functional modules from a seed protein via integration of protein interaction and gene expression data. BMC Bioinformatics. 2007, 8: 408-10.1186/1471-2105-8-408.PubMedPubMed CentralView ArticleGoogle Scholar
- Feng J, Jiang R, Jiang T: A max-flow based approach to the identification of protein complexes using protein interaction and microarray data. Comput Syst Bioinformatics Conf. 2008, 7: 51-62.PubMedView ArticleGoogle Scholar
- Ulitsky I, Shamir R: Identification of functional modules using network topology and high-throughput data. BMC Syst Biol. 2007, 1: 8-10.1186/1752-0509-1-8.PubMedPubMed CentralView ArticleGoogle Scholar
- Li X, Wu M, Kwoh CK, Ng SK: Computational approaches for detecting protein complexes from protein interaction networks: a survey. BMC Genomics. 2010, 11 (Suppl 1): S3-10.1186/1471-2164-11-S1-S3.PubMedPubMed CentralView ArticleGoogle Scholar
- Enright AJ, Van Dongen S, Ouzounis CA: An efficient algorithm for large-scale detection of protein families. Nucleic Acids Res. 2002, 30 (7): 1575-1584. 10.1093/nar/30.7.1575.PubMedPubMed CentralView ArticleGoogle Scholar
- King AD, Przulj N, Jurisica I: Protein complex prediction via cost-based clustering. Bioinformatics. 2004, 20 (17): 3013-3020. 10.1093/bioinformatics/bth351.PubMedView ArticleGoogle Scholar
- Frey BJ, Dueck D: Clustering by passing messages between data points. Science. 2007, 315 (5814): 972-976. 10.1126/science.1136800.PubMedView ArticleGoogle Scholar
- Paccanaro A, Casbon JA, Saqi MA: Spectral clustering of protein sequences. Nucleic Acids Res. 2006, 34 (5): 1571-1580. 10.1093/nar/gkj515.PubMedPubMed CentralView ArticleGoogle Scholar
- Tong AH, Lesage G, Bader GD, Ding H, Xu H, Xin X, Young J, Berriz GF, Brost RL, Chang M, et al: Global mapping of the yeast genetic interaction network. Science. 2004, 303 (5659): 808-813. 10.1126/science.1091317.PubMedView ArticleGoogle Scholar
- Krogan NJ, Cagney G, Yu H, Zhong G, Guo X, Ignatchenko A, Li J, Pu S, Datta N, Tikuisis AP, et al: Global landscape of protein complexes in the yeast Saccharomyces cerevisiae. Nature. 2006, 440 (7084): 637-643. 10.1038/nature04670.PubMedView ArticleGoogle Scholar
- Mewes HW, Frishman D, Mayer KF, Munsterkotter M, Noubibou O, Pagel P, Rattei T, Oesterheld M, Ruepp A, Stumpflen V: MIPS: analysis and annotation of proteins from whole genomes in 2005. Nucleic Acids Res. 2006, 34 (Database issue): D169-D172.PubMedPubMed CentralView ArticleGoogle Scholar
- Friedel CC, Krumsiek J, Zimmer R: Bootstrapping the interactome: unsupervised identification of protein complexes in yeast. J Comput Biol. 2009, 16 (8): 971-987. 10.1089/cmb.2009.0023.PubMedView ArticleGoogle Scholar
- Ponomarenko JV, Bourne PE: Antibody-protein interactions: benchmark datasets and prediction tools evaluation. BMC Struct Biol. 2007, 7: 64-10.1186/1472-6807-7-64.PubMedPubMed CentralView ArticleGoogle Scholar
- Brohee S, van Helden J: Evaluation of clustering algorithms for protein-protein interaction networks. BMC Bioinformatics. 2006, 7: 488-10.1186/1471-2105-7-488.PubMedPubMed CentralView ArticleGoogle Scholar
- Moschopoulos CN, Pavlopoulos GA, Likothanassis SD, Kossida S: An enhanced Markov clustering method for detecting protein complexes. 8st IEEE International Conference on Bioinformatics and Bioengineering: 8-10 October. 2008, Athens, GreeceGoogle Scholar
- von Luxburg U: A tutorial on spectral clustering. Stat Comput. 2007, 17 (4): 395-416. 10.1007/s11222-007-9033-z.View ArticleGoogle Scholar
- Vlasblom J, Wodak SJ: Markov clustering versus affinity propagation for the partitioning of protein interaction graphs. BMC Bioinformatics. 2009, 10: 99-10.1186/1471-2105-10-99.PubMedPubMed CentralView ArticleGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited