- Research article
- Open Access
Molecular cloning and in-silico characterization of high temperature stress responsive pAPX gene isolated from heat tolerant Indian wheat cv. Raj 3765
BMC Research Notes volume 7, Article number: 713 (2014)
Heat stress leads to accelerated production of reactive oxygen species (ROS) which causes a huge amount of oxidative damage to the cellular components of plants. A large number of heat stress related genes as HSPs, catalases, peroxidases are overexpressed at the time of stress. A potent stress responsive gene peroxisomal ascorbate peroxidase (TapAPX) obtained from heat stress (42°C) responsive subtractive cDNA library from a thermo tolerant wheat cv. Raj3765 at anthesis stage was cloned, characterized and its role was validated under heat stress by proteomics and in-silico studies. In the present study we report the characterization at molecular and in-silico level of peroxisomal TapAPX gene isolated from heat tolerant wheat cultivar of India.
qPCR studies of TapAPX gene displayed up to 203 fold level of expression at 42°C heat stress exposure. A full length cDNA of 876 bp obtained by RACE deduced a protein of 292 amino acid residues which gives a complete 3D structure of pAPX by homology modeling. TapAPX cDNA was cloned in expression vector pET28 (a+) and the recombinant protein over-expressed in E. coli BL21 showed highest homology with APX protein as deduced by peptide mass fingerprinting.
TapAPX gene from wheat cv Raj3765 has a distinct role in conferring thermo tolerance to the plants and thus can be used in crop improvement programmes for development of crops tolerant to high temperature.
Heat stress in plants produces large number of Reactive Oxygen Intermediates (ROIs) like superoxide ion (O2-), hydroxide ion (OH-), singlet oxygen (O2*), H2O2 etc. excess of which can lead to damage of plant cells. Among these ROS (Reactive Oxygen Species), H2O2 can accumulate in cells to toxicity levels because of its high stability. A number of cellular enzymes as superoxide dismutase, monodehydroascorbate reductase, glutathione reductase and ascorbate peroxidase are produced by the cell to get rid of high level of H2O2. Ascorbate peroxidase plays a leading role in removing ROIs in ascorbate-glutathione cycle . Four types of APX isoforms have been identified based on the phylogenetic analysis: cytoplasmic APX 1 and APX2, chloroplastic APX and membrane bound APX. Upregulation of APX genes was observed under abiotic stress conditions in rice, white birch and Suaeda salsa[3–5] and APX has also been reported in different food crops like pea, cayenne pepper, grape [6–8]. APX thus has a distinct role in conferring tolerance to plants against abiotic stress.
In the present study, the coding sequence of peroxisomal or glyoxisomal Ascorbate peroxidase (TapAPX) gene [Genbank:JX126968] (http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/) from a heat tolerant cultivar Raj3765  of Indian bread wheat (Triticum aestivum L.) designated as TapAPX was cloned and characterized. The TapAPX gene was subcloned in pET-28a and transformed in E. coli for heterologous protein expression studies. The expressed protein Ta pAPX was confirmed by SDS-PAGE analysis, western blotting and peptide mass fingerprinting. The over expression of Ta pAPX protein in bacterial system under heat stress was validated and the over-expressed protein was purified using Ni-NTA His-tag purification column for further proteomics studies. Homology search based modeling was performed to deduce a three dimensional (3-D) structure of the protein. The refined structure of generated Ta pAPX was confirmed with its template structure followed by identification of its active site residues. The functional correlation and interaction between the Ta pAPX and its substrate H2O2 was validated by docking analysis.
Lipid peroxidation assay, subtracted cDNA library preparation and functional annotation
Estimation of lipid peroxidation was done for the leaf samples collected from plants subjected to heat stress for different time intervals. Non-specific absorbance of the extract at 600 nm was subtracted from the 532 nm readings. The MDA (malondialdehyde) concentration in nmol/g dry weight (nmol/gDW) was calculated. Samples of heat susceptible cv. HD 2967 subjected to heat stress of 37°C and 42°C for 30 min to 6 h, showed statistical significant changes as compared to control (Table 1), an increase in MDA concentration in the range of 40.56 nmol/gDW to 90.95 nmol/gDW and 41.99 nmol/gDW to 108.56 nmol/gDW respectively was observed. Whereas, samples of heat tolerant cv Raj 3765 subjected 37°C and 42°C heat stress for 30 min to 6 h showed increase as well as decrease in MDA concentration in comparison to control. MDA concentration in heat stressed samples of cv Raj 3765 varied from 64.54 nmol/gDW to 106.67 nmol/gDW (37°C) and 44.90 nmol/gDW to 112.28 nmol/gDW (42°C). To identify differentially expressed heat stress responsive genes in wheat cv.Raj 3765 plants at anthesis stage, 42°C. Heat stress responsive subtractive cDNA libraries were constructed in pGEM-T easy vector. A total of 545 clones were obtained from forward EST (Expressed Sequence Tags) library and colony PCR using T7/SP6 primers confirmed 253 clones to have insert size ranging from 250 to 1500 bp. Sequencing of randomly selected 250 clones confirmed a total number of 204 high quality ESTs (http://www.ebi.ac.uk/ena/) after removal of vector (NCBI/vecscreen) and adaptor sequences. After assembly of 204 ESTs [ENA:HG314154-HG314357], 149 unigenes containing 45 contigs and 104 singletons were obtained. Similarity analysis of 149 unigene sets by BLASTX search confirmed annotation of 101 unigenes where 48 EST sequences showing no hit (Additional file 1: Table S1).
Real time quantification for TapAPX gene
Functional annotation of obtained EST sequences identified a number of genes (5.38%) expressed in response to abiotic and biotic stress in wheat cv. Raj 3765. A transcript with 720 bp showed highest similarity (97%) with APX gene in NCBI database. The differential expression of TapAPX at different stages of wheat development viz seedling, tillering, stem elongation and anthesis stage was observed by qPCR analysis (Figure 1) and fold expression of 203 times of TapAPX at 42°C stress during anthesis stage in heat tolerant cv. Raj 3765 was observed. TapAPX was also upregulated at 37°C of heat stress during anthesis stage in wheat though the up-regulation was observed to be only 3.2 fold. A base level of gene expression was experienced in heat susceptible wheat cv. HD 2967 during similar stage at heat stress of 37°C & 42°C. A comparative analysis of expression of TapAPX at other developmental stages (seedling, tillering and stem elongation) in wheat cv. Raj3765 reflected that there was a negative fold change of expression at both 37°C and 42°C in the above mentioned stages of plant. Housekeeping gene Actin was used as constitutive control for all qPCR studies .
Full length characterization of cDNA encoding for TapAPX gene and its expression in E. coli BL21 cells
Full length cDNA sequence (876 bp) of TapAPX gene was amplified by 5′ and 3′ RACE- PCR. The TapAPX cDNA amplicons obtained were cloned in pGEM-T easy vector (Promega, USA) and sequenced to get the full length TapAPX cDNA of 1236 bp. Nucleotide sequence showed 96 percent homology with TapAPX gene in Genbank databases. The obtained TapAPX gene sequence having an ORF of 876 bp with a 199 bp 5′ and 161 bp 3′ untranslated regions (UTRs) coding a protein of 292 amino acids with a predicted isoelectric point of 7.4 (http://web.expasy.org/translate/). The deduced protein had an approximate molecular weight of 32 kDa and the translated amino acid sequence showed an overall 83 to 98 percent identities with APX from Hordeum vulgare [Genbank:BAB62533], Aegilops tauschii [Genbank:EMT10887], Puccinellia tenuiflora [Genbank:AGW23429], Oryza sativa Japonica [Genbank:NP_001062439], Brachypodium distachyon [Genbank:XP_003574893]. The TapAPX cDNA was cloned in expression vector pET-28a(+) and transformed in E. coli BL21. The white colony of E. coli BL21 cells containing pET-28a(+)-TapAPX recombinant plasmid was inoculated in LB media. IPTG was added to the media for induction of 32 kDa fusion protein which was successfully expressed having similar molecular weight of barley HvAPX. It was also noticed that the amount of expressed protein was enhanced as the time of IPTG induction increased (0 h, 3 h, 6 h and 16 h) as evident from the intensity of band on SDS PAGE gel (Figure 2A). This confirmed that the Ta pAPX protein was expressed in E. coli as in the expected manner. The activity of Ta pAPX protein expression was detected in bacterial extracts by SDS PAGE showing a prominent and enriched band with an apparent size of 32 kDa.
Western blotting, purification and PMF (Peptide mass fingerprinting) of the expressed Ta pAPX protein
The expression vector used has His Tag (Histidine Tag) 5′ upstream of the cloning site. As a result, the recombinant protein has a 6X Histidine at N- terminal. To confirm the expressed recombinant protein, western blotting analysis was carried out with Anti-His antibody for hybridization to His-Tag of recombinant protein. The developed blot showed the presence of a single band of the expected size (Figure 2B). The overexpressed Ta pAPX protein purified using Ni-NTA column showed the presence of a single band (~35 kDa) (Figure 2C). The sequencing results obtained after PMF of the overexpressed protein band using MALDI-TOF/TOF (Matrix Assisted Laser Desorption/Ionization-Time of Flight) confirmed the Ta pAPX protein (Figure 2D). The sequencing results obtained after MALDI showed highest homology with a protein having molecular weight of 31832 Da.
Heat stress tolerance in E. coli
E. coli cultures harbouring the recombinant plasmid pET-28a-TapAPX grown at temperature viz 37°C, 39°C, 41°C and 43°C higher than optimum temperature for E. coli growth showed continuous increased growth in comparison to E. coli cells having pET-28a vector only, as evident by O.D. (Optical Density) at A600 of E. coli cultures at different temperatures (Figure 3A, Additional file 2: Table S2). Total protein from bacterial cells of E. coli transformed with pET-28a-TapAPX showed over expression of pAPX gene as evident on SDS-PAGE where no expression of TapAPX gene was observed in case of E. coli transformed with pET-28a vector (Figure 3B).
In-silico characterization of TapAPX
The phylogenetic tree constructed by using full length CDS sequences of Ta pAPX gene available in NCBI database depicts that the present isolate TapAPX well clustered with Triticum aestivum [Genbank:EF555121.1] and Hordeum vulgare [Genbank:AB063117.1] both having 96% identity whereas only 85% identity was observed with cluster of Aeluropus littoralis [Genbank:JF907687.1] and Zea mays [Genbank:EU976229.1] (Figure 4A, B) . The protein sequence of TapAPX subjected to PROSITE scan database revealed the presence of 2 functional sites i.e. from residue position number 31–42 and 152–162 and PFAM search database displayed the peroxidase region of Ta pAPX protein from 15–224. Physiochemical properties of protein obtained from ProtParam tool revealed that the present protein sequence contains 292 amino acids and has a molecular weight of 31770.3 Da with a theoretical pI of 7.74. Alanine (11.7%) followed by Leucine (10.3%) and Glycine (8.6%) were the maximum number of amino acid residues present in the protein sequence. The total number of negative (Aspartic acid + Glutamic acid) and positively charged (Arginine + Lysine) residues were 39 and 40 respectively. The instability index (II) was computed to be 31.07 and it classifies the protein as stable. The grand average of hydropathicity (GRAVY) was calculated to be -0.270 which indicates the solubility of the protein to be hydrophobic. Secondary structure of Ta pAPX protein generated by GOR IV method generated an alpha helix region to be of 32.65%, extended strand region of 16.84% and Random coil region of 50.52%.
Three dimensional structure generation
The model of wheat Ta pAPX protein was generated by homology modeling using different servers. The PDB Blast analysis revealed that the protein sequence of Ta pAPX showed maximum identity (64%) with Ascorbate Peroxidase of Glycine max [PDB:2XIF_A] (http://www.rcsb.org/pdb/home/home.do). On the basis of Ramachandran plot and Verify3D program, the protein structure generated from SWISS-MODEL was selected for further analysis. Structure of Ta pAPX was visualized using PyMOL (Figure 5A). The PROCHECK analysis of protein revealed that no amino acid residues have phi/psi angles in the disallowed regions (Figure 5B) of Ramachandran plot which indicates that the protein is highly stable. Verify3D program showed good 3D_1D profile score of the residues i.e. 99.17% residues had an average 3D-1D score of >0.2. The QMEAN server used to find the overall quality of three dimensional structure of Ta pAPX protein displayed a QMEAN and QMEANZ score of 0.816 and 0.5 respectively suggesting that TapAPX protein model is acceptable. The 3D protein model has been submitted to Protein Model Data Base [PMDB:PM0079451] (http://bioinformatics.cineca.it/PMDB/). Comparative study of Ta pAPX model and its template 2XIF_A by iPBA webserver showed a root mean square deviations (RMSD) score of 0.16 Å as measured by average distance between the backbones of both the models (Figure 5C).
Active site identification and docking study
Ten different active sites were identified (Figure 6A) in the generated Ta pAPX 3D protein model by Q-SiteFinder (Table 2). H2O2 ligand molecule was retrieved from pubchem database [PubChem:CID_784] for docking studies of the generated protein structure. Nine different confirmations of docking between the receptor (Ta pAPX) and the ligand molecule (H2O2) were obtained using Autodock vina. The best docked interaction model of Ta pAPX with H2O2 (hydrogen peroxide) was analyzed by Autodock tool. Each ligand represents a specific binding energy where the ligand containing lowest binding energy conformation was considered the most acceptable docking structure. The docked confirmation with lowest binding energy score i.e. -3.3 was selected for further analysis. Docking analysis clearly indicates that the ligand molecule was involved in the interaction with Ta pAPX model and that H2O2 formed H bond between 2 amino acid residues i.e. ASN55 and SER57 (Figure 6B).
For cloning of differentially expressed genes, Suppression Subtractive Hybridization (SSH) has proved to be a powerful tool for identifying abiotic stress (heat, drought, salt, nutrient deficiency etc.) responsive gene transcripts in plants [12, 13]. In our study, the thermo- tolerant wheat cv. Raj 3765 subjected to heat stress of 37°C and 42°C for different time periods (½ h, 1 h, 2 h, 4 h and 6 h) was selected as tester and normally growing cv. Raj 3765 as control. These plant groups were given heat treatment to get a wide range of heat responsive transcripts expressing at two variable high temperatures. TBARS results with the heat stressed samples showed that MDA concentration increase in case of HD2967 was in a very wide range whereas the heat tolerant cv. Raj 3765 showed MDA variation in a limited range in response to heat stress. Moreover, a rapid decrease in MDA concentration in the heat stress samples of cv. Raj3765 is suggestive of a protection mechanism against oxidative damage due to heat stress which maybe controlled by higher induced activities of antioxidant enzymes [11, 14]. From the differentially expressed 204 ESTs, which were obtained in subtractive library, Ta pAPX was cloned in full length using RACE-PCR. Heat treatment results in H2O2 production and APX plays an important role in eliminating H2O2 using ascorbate as a specific electron donor. Expression of APX activity was 203 times higher in thermo-tolerant variety as compared to the susceptible one and it was also highly active in 42°C rather than 37°C. The transcript level of TapAPX gene increased gradually at anthesis stage, which is considered as critical developmental stage and is highly sensitive to heat stress . For the qPCR studies, Actin gene was used as internal control, though other housekeeping genes like: Glyceraldehyde-3 phosphate dehydrogenase, 18S rRNA etc. also can be used as internal control in qPCR studies . APX has been cloned from many other crops like cotton, A. thaliana, barley [17–19] and also from wheat expressing against powdery mildew disease . The role of TapAPX in heat stress response was validated when the gene was expressed in prokaryotic system. Bacterial cells E. coli BL21 harbouring a recombinant plasmid over expressing the TapAPX gene of wheat could tolerate high temperature as evident by a gradual increase of cell density measured by O.D. as compared to cells having pET-28a vector which were sensitive to heat stress.
A heterologous expression system was used for high level expression of TapAPX in E. coli and further facilitated to obtain highly purified Ta pAPX protein by Ni-NTA Histidine based purification system. The purified protein could be useful for the production of protein specific antibody. Protein sequence of Ta pAPX over expressed in bacterial system was confirmed by peptide mass fingerprinting. The molecular interactions of Ta pAPX with its substrate furnished by computational analysis confirmed its strong connection to degrade ROIs such as H2O2. The CDS of TapAPX gene could be potentially useful for the development of heat tolerant transgenic crop plants.
The homology search comparative modeling and docking studies finally validated the functional correlation between enzyme Ta pAPX and its substrate H2O2. The refined Ta pAPX 3D structure was successfully generated and its active site residues were identified. 3D structure provides the useful information related to molecular function and identification of active sites . PDB PSI- BLAST was searched for finding its template showing maximum identity of 64% that can be considered as a good score to start modeling. It was observed that two distinct amino acid residues viz. Asn and Ser which are potentially involved to recover the normal physiological metabolism against abiotic stress [22, 23]. Further detailed molecular biology work on the expression of TapAPX in Arabidopsis plant and common wheat is going on in our laboratory which would provide a valuable work in understanding the mechanism of heat stress tolerance in wheat.
In-silico based approach and characterization of TapAPX at nucleic acid and proteomics level revealed the membrane bound nature of this gene. The nucleotide sequence of TapAPX and its deduced amino acid sequence analysis obtained after PMF (Peptide Mass Fingerprinting) of the differentially expressed protein bands on SDS-PAGE revealed that it belongs to peroxisomal type of peroxidase. In-silico characterization of this gene was carried out by homology BLAST search, multiple sequence alignment, construction of phylogenetic tree, 3D structure and active sites generated by homology modeling and thereby enzyme- substrate interaction study by docking analysis. The docking analysis by Autodock vina tool revealed that hydrogen bonding between H2O2 with Asn and Ser residues of Ta pAPX and may cause its breakdown during biochemical reaction. The recombinant Ta pAPX protein produced in E. coli BL21 cells was able to rescue cells growing at higher temperature (43°C) as compared to control. The changes in cell growth (in terms of O.D.) in comparison with its control was found to be statistically significant (simple pair wise t-test) when cells were exposed upto 43°C stress where it was not changed distinctly for other low temperature stress conditions. In this study, the heat stress was maximized up to 43°C for bacterial cells by taking into consideration heat stress imposition at 42°C to the plants just before the SSH library construction. However, it is possible that more significant changes may be noticed, if the bacterial cells are exposed to temperature stresses of above 43°C and upto a sub lethal temperature. Real time analysis have also shown a very high level gene expression in terms of fold change (F.C.-203) when plants were exposed to heat stress at 42°C. In vitro results together with in-silico studies confirm the high level of enzyme activity of this gene in order to improve tolerance under abiotic stress and it indicates that the TapAPX gene plays a leading role in mediating overlapping cellular processes especially heat and oxidative stress. This finding will help us to validate not only abiotic stress but also biotic stress response of this enzyme in model plant systems and as well as improvement of genetic background of several crop plants susceptible to abiotic stresses by implying transgenic technologies.
Complete CDS of TapAPX from thermotolerant wheat cv. Raj3765 was isolated, cloned sequenced and characterized (in-sili co) for the first time in Indian bread wheat. qPCR studies confirmed the role of TapAPX gene in thermo tolerance in wheat. The over expressed Ta pAPX protein was functionally validated in E. coli by western blot and MALDI. Biological validation of TapAPX gene in prokaryotic system was confirmed by growth at high temperature of recombinant E. coli cells harbouring wheat TapAPX gene showing significant changes subjected to stress of 43°C. Ramachandran plot, protein 3D structure and docking analysis have given a deep understanding of TapAPX gene.
Plant materials, heat stress treatment, lipid peroxidation assay and SSH cDNA library construction
Heat tolerant wheat (Triticum aestivum) cv. Raj3765 plants and heat susceptible wheat cv. HD2967  plants were grown in National Phytotron Facility, IARI, New Delhi under a light period of 16 h at ±25°C and light intensity of 350 μ molm-2 s-1 and dark period of 8 h . Heat treatment was given to plants at anthesis stage at 42°C for different time periods (½ h, 1 h, 2 h, 4 h and 6 h). Lipid peroxidation assay was performed according to the TBARS (Thiobarbituric Acid Reacting substances) method . Non specific absorbance of the extract at 600 nm was subtracted from the 532 nm readings to find out the absolute amount. Total RNA from heat stressed and heat unstressed plants were extracted using Spectrum™ Plant Total RNA Kit (Sigma, USA). cDNA was prepared from 1 μg of total RNA using SMART PCR cDNA synthesis kit (Clontech laboratories, USA) according to manufacturer’s protocol. The forward and reverse libraries were constructed using PCR select cDNA subtractions kit (Clontech laboratories, USA). The expressed secondary PCR amplified products were cloned into pGEM-T easy vector (Promega, USA). The obtained clones of forward and reverse libraries were sequenced in an automated sequencer (ABI Prism 310, Applied Biosystems, USA). All the good EST sequences were assembled into contigs and singlets by using CAP3 sequence assembly program (http://doua.prabi.fr/software/cap3). The assembled sequences representing unigene data sets were further analyzed for identity search (BLASTX) to the NCBI BLAST program by using BLAST2GO program (http://www.blast2go.com/b2ghome) for identifying heat stress responsive genes.
Real time PCR of TapAPX transcripts
Plants at different developmental stages viz. seedling, tillering, stem elongation and anthesis stages were subjected to heat stress treatment in 37°C and 42°C for different time intervals i.e. ½ h, 1 h, 2 h, 4 h and 6 h. Similar heat stress was also imposed to heat susceptible wheat cv. HD2967 at anthesis stage  for checking the varietal differences. The stressed and unstressed plant samples were harvested, immediately frozen in liquid N2 and stored at -80°C for downstream experiments. Total RNA was isolated using Spectrum™ Plant Total RNA Kit (Sigma, USA) as per manufacturer’s instructions. The cDNA synthesis was carried out from the isolated RNA by using SuperScript™ III First-Strand Synthesis System (Invitrogen, USA). The qPCR reaction was performed with the synthesized cDNA as template. Based on the sequence information of EST of the forward SSH library, qPCR primers for TapAPX was designed (Table 3). The reaction [Lightcycler 480 SYBR green Master mix, 2X-10 μl (Roche, USA); PCR primers (Forward and Reverse), 10 mM-1 μl each; cDNA template, 40 ng/μl-5 μl and PCR grade water-3 μl] was carried out using LightCycler® 480 II System (Roche, USA). For endogenous control, constitutively expressed Actin gene was used. All the reactions were done in triplicate.
RACE (rapid amplification of cDNA ends) PCR of TapAPX gene and heterologous protein expression in E. coli
The 5′ and 3′ RACE PCR (Rapid amplification of cDNA ends) were performed in separate reactions to obtain full length sequence of TapAPX gene by using SMARTer™ RACE cDNA Amplification Kit (Clontech laboratories, USA). The fragments obtained after 5′ and 3′ RACE-PCR were cloned independently in pGEM-T Easy vector (Promega, USA) and thereafter sequenced to get full length cDNA sequence along with 5′ upstream and 3′ downstream sequences.
Specific primers (Table 3) were designed for cloning of TapAPX full length cDNA in pET-28a expression vector (Novagen, USA). The oligonucleotide of the primer sequences were designed in a manner to introduce BamHI site just before the start codon ATG and SacI site just after the stop codon (TAA). Using suitable concentration of the designed primers (10 mM, 0.5 μl each), dNTPs of (25 mM) 0.25 μl, MgCl2-1.25 μl, DNA polymerase- 0.25 μl and DNA polymerase buffer (10×)- 2.5 μl, full length coding TapAPX sequence was PCR amplified using total cDNA (200 ng) as a template. The amplified PCR product was purified using QIAquick PCR purification kit (Qiagen, USA). 1 μg of PCR purified product of (TapAPX) was digested with 1 μl each of 20 U/μl of restriction enzymes BamH1 and Sac1 (NEB, USA) in a reaction of 20 μl, the vector pET-28a (500 ng) digested with same set of restriction enzymes. The digestion reaction was carried out at 37°C for 3 hours. The digested PCR product was cloned in pET-28a vector using T4 DNA ligase, the ligated product was transformed in E. coli DH5α and recombinant clones were selected on LA plates supplemented with antibiotic Kanamycin 30 μg/ml. The positive clones were further screened by colony PCR using gene specific primers of TapAPX. Sequencing of the clone having TapAPX gene was carried out using T7 promoter primer to reconfirm the presence of TapAPX gene along with the presence of 6X His-tag at the 5′ upstream of the expression vector pET-28a. The expression study of TapAPX gene in prokaryotic system was done by transforming the pET-28a-TapAPX recombinant plasmid in E. coli BL21 cells (Novagen, USA) using heat shock method . The positive clone obtained on selection media (LA + 30 μg/ml Kanamycin) was inoculated in LB supplemented with 30 μg/ml kanamycin and incubated at 37°C. Isopropyl β-D thiogalacto pyranoside (IPTG), an inducer of T7 promoter in pET-28a vector, was added at final concentration of 1 mM when O.D of the culture reached an absorbance of 0.5 at 600 nm. TapAPX which is now under the control of T7 promoter in pET-28a vector, samples were collected at 0, 3 h, 6 h and 16 h after induction was given. The samples were resuspended in protein extraction buffer (100 mM Tris–HCl, pH-7.5, 1 mM of PMSF in isopropanol, 10 mM EDTA (Ethylene Diamine Tetra Acetic acid) and 1.6 μg/ml of lysozyme (final concentration) and kept on ice for 1 h. Total protein was quantified using Nanodrop spectrophotometer (Thermo Scientific NanoDrop 2000C Technologies, Wilmington, USA) and 20 μg of total protein was loaded on two separate 12% SDS-PAGE gel , one gel was used for coomassie staining to visualize the protein bands and other for western blotting to confirm the identity of protein under study.
Western blotting of Ta pAPX protein and purification
The Ta pAPX protein from the SDS-PAGE was transferred to the PVDF membrane (BIO-RAD, USA) using Mini Trans-Blot® cell MTB module (BIO-RAD, USA) using a constant supply of 45 V for 1 h. The presence of pre-stained marker on the membrane confirmed the transfer process. The membrane was then incubated in blocking solution 5% BSA (Bovine serum albumin) in TSW buffer (10 mM Tris–HCl, pH-7.4, 0.02% SDS, 0.9% NaCl, 0.1% Triton X-100) on a gyro-rotary shaker at room temperature for 1 h. Further the membrane was incubated with anti-His-tag antibody (Mouse monoclonal Antibody) (Abm, Canada) at a dilution of 1:4000 for 1 h. Three washes of 10 min each was given with TSW buffer followed by incubation with Alkaline Phosphatase Conjugated Affinity Purified Antimouse secondary antibody (Abm, Canada) with same dilution and incubated for 1 h. After washing with TSW buffer for 3 times (10 min each), the membrane was developed using NBT/BCIP substrate solution. The presence of single band at appropriate location confirmed the presence of recombinant protein. For protein purification, the total protein was extracted from overnight grown E. coli BL21 cell containing pET28a-TapAPX construct by using Total Protein Extraction kit (G-Biosciences, St. Louis, USA). 500 μl of the extracted total protein was loaded directly on His SpinTrap columns (GE Healthcare, Amersham, UK) containing Ni Sepharose High Performance medium for perfectly binding of Histidine tagged protein. The purification steps were followed according to manufacturer’s protocol and the purified protein was further checked on 12% SDS-PAGE.
PMF (Peptide mass fingerprinting) of the expressed protein
The SDS-PAGE gel selected for Coomassie staining having over-expressed Ta pAPX protein band was sliced out using a sharp scalpel. The gel slice was diced to small pieces and placed in eppendorf tubes. The gel pieces were destained using destaining solution for 10 min intervals (3–4 times) by vortexing untill the gel pieces become translucent white. The gel pieces were dehydrated using acetonitrile and Speedvac till complete dryness, after that rehydration was done with DTT (Dithiothreitol) and incubated for 1 h. After incubation the DTT solution was removed which was replaced with Iodoacetamide and incubated for 45 min. The supernatant was removed and the gel pieces were incubated with ammonium bicarbonate solution for 10 min. Again supernatant was removed and the gel pieces were dehydrated with acetonitrile for 10 min and dried using speedvac. Trypsin solution was added to gel pieces and incubated overnight at 37°C. After incubation the supernatant, which is now having peptides, was transferred to fresh eppendorff tubes. The gel pieces were extracted thrice with extraction buffer and the supernatant was collected each time into the same eppendorff tube and then given Speedvac till complete dryness . The dried pepmix was suspended in TA buffer. The peptides obtained were mixed with (α-cyano-4-hydroxycinnamic acid) HCCA matrix in 1:1 ratio and the resulting 2 μl mix was spotted directly onto the MALDI plate. After air drying the sample, it was analyzed on the MALDI TOF/TOF ULTRAFLEX III instrument (Bruker, Germany) and further analysis was done with FLEX ANALYSIS SOFTWARE for obtaining the PEPTIDE MASS FINGERPRINT (PMF). The masses obtained in the peptide mass fingerprint were submitted for Mascot search in “plant” database for identification of the protein.
Heat stress tolerance study in E. coli
The E. coli BL21 cells containing pET28a-TapAPX construct was used for heat stress tolerance study. The initially grown bacterial cell samples at 37°C were taken for IPTG induction (1 mM) and thereafter kept at 37°C, 39°C, 41°C and 43°C for 6 h. E. coli BL21 cells with pET-28a vector only were used as negative control. The O. D. at A600 was measured and the statistical analysis was done using simple pair wise t-test in comparison to respective control at an α level of 0.05. The total cell protein (10 μg each) from bacterial samples heat stressed at different temperatures was weighed down in each well on a 12% SDS-PAGE gel to check the expression variation of recombinant protein.
In-silico characterization of TapAPX gene
The cloned CDS sequence of TapAPX gene was searched for homology with NCBI database by BLASTN and its translated protein sequence for the complete ORF was retrieved from NCBI database by BLASTP search . The complete sequence of present isolate was compared with reported nine isolates in different monocots available in GenBank. Multiple alignment and sequence identity matrix of the sequences of TapAPX gene was carried out using Clustal Omega program (http://www.ebi.ac.uk/Tools/msa/clustalo/) . Phylogenetic analysis based on neighbor-joining method was conducted in MEGA4 (http://www.megasoftware.net/mega4/mega.html)  to investigate the ancestral relationships and closely related species. The protein domain functional analysis of Ta pAPX protein sequence was searched by PROSITE (http://prosite.expasy.org/) , PFAM (http://pfam.xfam.org/)  and conserved domain was searched by CDD (http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/Structure/cdd/cdd.shtml) . The physicochemical properties of Ta pAPX protein were analyzed by ProtParam tool (http://web.expasy.org/protparam/) . The secondary structure of Ta pAPX protein was genrated by GOR IV server (http://npsa-pbil.ibcp.fr/cgi-bin/npsa_automat.pl?page=npsa_gor4.html) .
Three dimensional structure generation
For the modeling of three dimensional structure, a suitable template was searched by using PDB PSI-BLAST (Position-Specific Iterated BLAST) . Construction of three dimensional structures by using different homology modeling servers like Phyre2 (http://www.sbg.bio.ic.ac.uk/phyre2/html/page.cgi?id=index) , ESyPred3D (http://www.unamur.be/sciences/biologie/urbm/bioinfo/esypred/) , Protein Structure Prediction Server (PS)2 (http://ps2.life.nctu.edu.tw/) , SWISS-MODEL (http://swissmodel.expasy.org/interactive) , Jigsaw (http://bmm.cancerresearchuk.org/~3djigsaw/)  and I-Tasser (http://zhanglab.ccmb.med.umich.edu/I-TASSER/)  was performed to find out the best one. By using SAVES (Structural Analysis and Verification Server) (http://services.mbi.ucla.edu/SAVES/), the conformations of generated models were inspected by the Phi/Psi Ramachandran plot obtained from PROCHECK server  and Verify_3D  was used to find the acceptable average 3-D ID score. The quality of Ta pAPX protein models was checked by using Qualitative Model Energy Analysis (QMEAN) server (http://swissmodel.expasy.org/qmean/cgi/index.cgi) . On the basis of model stability, best model was selected from SWISS-MODEL server. The PyMOL (http://www.pymol.org/)  software was used to visualize the 3D structure and the iPBA webserver (http://www.dsimb.inserm.fr/dsimb_tools/ipba/)  was used for superimposing the generated model with its template model.
Active site identification and docking study
The identification of active sites of Ta pAPX protein structure was obtained from Q-SiteFinder tool (http://www.bioinformatics.leeds.ac.uk/qsitefinder) . Docking was used to identify the specific active sites on protein where receptor- ligand interaction occurs by Autodock vina 1.1.2 (http://vina.scripps.edu/index.html) . The structure of H2O2 (hydrogen peroxide) ligand molecule available in PubChem site (http://pubchem.ncbi.nlm.nih.gov/)  of NCBI database in SDF (Sql Database File) format and the conversion of ligand to PDB format was done using the Open babel software (http://openbabel.org/wiki/Main_Page) . The file format conversion of the receptor and ligand structures from PDB to PDBQT was performed by using Autodock tool (ADT) (http://autodock.scripps.edu/resources/adt) . A grid-box was generated to cover the entire protein structure so that the ligand molecule moves freely. The dimension of grid-box was kept as 22 Å × 24 Å × 28 Å and spacing of grid point set at 1 Å.
Availability and requirements
The software and bioinformatics tools used in this manuscript are mentioned above along with hyperlink.
Sodium dodecyl sulfate polyacrylamide gel electrophoresis
Nickel-nitrilotri acetic acid
Absorbance at 600 nm
National centre for biotechnology information
European Nucleotide Archive.
Asada K: Ascorbate peroxidase hydrogen peroxide scavenging enzyme in plants. Physiol Plant. 1992, 85: 235-241. 10.1111/j.1399-3054.1992.tb04728.x.
Teixeira FK, Menezes-Benavente L, Galvao VC, Margis R, Margis-Pinhiero M: Rice peroxidase gene family encodes functionally diverse isoforms localized in different subcellular compartments. Planta. 2006, 224: 300-314. 10.1007/s00425-005-0214-8.
Lu Z, Liu D, Liu S: Two rice cytosolic ascorbate peroxidase differentially improve salt tolerance in transgenic Arabidopsis. Plant Cell Rep. 2008, 26: 1909-1917.
Wang C, Yang CP, Wang YC: Cloning and expression analysis of an APX gene from Betula platyphylla. J NE Forest U. 2009, 37: 79-88.
Ma CL, Wang PP, Cao ZY: cDNA cloning and gene expression of APX in Suaeda salsa in response to salt stress. J Plant Physiol. 2002, 28: 261-266.
Mittler R, Zilinskas BA: Purification and characterization of pea cytosolic ascorbate peroxidase. Plant Physiol. 1991, 97: 962-968. 10.1104/pp.97.3.962.
Yoo TH, Park CJ, Lee GL, Shin RY, Yun JH, Kim KJ, Rhee KH, Paek KH: A hot pepper cDNA encoding ascorbate peroxidase is induced during the incompatible interaction with virus and bacteria. Mol Cell. 2002, 14 (1): 75-84.
Lin L, Wang X, Wang Y: cDNA clone, fusion expression and purification of novel gene related to ascorbate peroxidase from Chinese wild Vitis pseudoreticulata in E. coli. Mol Biol Rep. 2006, 33 (3): 197-206. 10.1007/s11033-006-0008-5.
Rane J, Pannu RK, Sohu VS, Saini RS, Mishra B, Shoran-Crossa J, Vargas M, Joshi AK: Performance of yield and stability of advanced wheat genotypes under heat stress environments of the Indo-Gangetic plains. Crop Sci. 2007, 47: 1561-1573. 10.2135/cropsci2006.07.0479.
Padaria JC, Bhatt D, Biswas K, Singh G, Raipuria R: In-silico prediction of an uncharacterized protein generated from heat responsive SSH library in wheat (Triticum aestivum L.). Plant Omics. 2013, 6: 150-156.
DuPont FM, Hurkman WJ, Vensel WH, Tanaka CK, Kothari KM, Chung OK, Altenbach SB: Protein accumulation and composition in wheat grains: effects of mineral nutrients and high temperature. Eur J Agron. 2006, 25: 96-107. 10.1016/j.eja.2006.04.003.
Boominathan P, Shukla R, Kumar A, Manna D, Negi D, Verma PK, Chattopadhyay D: Long term transcript accumulation during the development of dehydration adaptation in Cicer arietinum. Plant Physiol. 2004, 135: 1608-1620. 10.1104/pp.104.043141.
Liu L, Zhou Y, Zhou G, Ye R, Zhao L, Li X, Lin Y: Identification of early senescence- associated genes in rice flag leaves. Plant Mol Biol. 2008, 67: 37-55. 10.1007/s11103-008-9300-1.
Sekman AH, Turkan I, Takio S: Differential responses of antioxidative enzymes and lipid peroxidation to salt stress in salt-tolerant Plantago maritima and salt-sensitive Plantago media. Physiol Plant. 2007, 131 (3): 399-411. 10.1111/j.1399-3054.2007.00970.x.
Hernandez JA, Almansa MS: Short term effects of salt stress on antioxidant systems and leaf water relations of pea plants. Physiol Plant. 2002, 115: 251-257. 10.1034/j.1399-3054.2002.1150211.x.
Bas A, Fosberg G, Hammarstrom S, Hammarstrom ML: Utility of the housekeeping genes18S rRNA, β-actin and Glyceraldehyde-3-Phosphate-Dehydrogenase for Normalization in Real-Time Quantitative Reverse Transcriptase-Polymerase Chain Reaction analysis of Gene Expression in Human T Lymphocytes. Scand J Immunol. 2004, 59: 566-573. 10.1111/j.0300-9475.2004.01440.x.
Bunkelmann JR, Trelease RN: Ascorbate peroxidase- a prominent membrane protein in oilseed glyoxysomes. Plant Physiol. 1996, 110: 589-598. 10.1104/pp.110.2.589.
Kubo A, Saji H, Tanaka K, Kondo N: Cloning and sequencing of a cDNA encodingAscorbate peroxidase from Arabidopsis thaliana. Plant Mol Biol. 1992, 18 (4): 691-701. 10.1007/BF00020011.
Shi WM, Muramoto Y, Ueda A, Takebe T: Cloning of ascobate peroxidase gene from barley and enhanced thermotolerance by overexpressing in Arabidopsis thaliana. Gene. 2001, 273 (1): 23-27. 10.1016/S0378-1119(01)00566-2.
Zhang H, Wang J, Nickel U, Allen RD, Goodman HM: Cloning and expression of an Arabidopsis gene encoding a putative peroxisomal ascorbate peroxidase. Plant Mol Biol. 1997, 34: 967-971. 10.1023/A:1005814109732.
Katiyar A, Lenka SA, Lakshmi K, Chinnusamy V, Bansal KC: In silico characterization and homology modeling of thylakoid bound ascorbate peroxidase from a drought tolerant wheat cultivar. Genomics Proteomics Bioinformatics. 2009, 7: 4-
Kaya C, Aydemir S, Sonmez O, Ashraf M, Dikilitas M: Regulation of growth and some key physiological processes in salt-stressed maize (Zea mays L.) plants by exogenous application of asparagine and glycerol. Acta Bot Croat. 2013, 72: 157-168.
Morimoto RI: Regulation of the heat shock transcriptional response: cross talk between a family of heat shock factors, molecular chaperones, and negative regulators. Gene Dev. 1998, 12: 3788-3796. 10.1101/gad.12.24.3788.
Kumar RR, Sharma SK, Gadpayle KA, Singh K, Sivaranjani R, Goswami S, Rai RD: Mechanism of action of hydrogen peroxide in wheat thermotolerant-interaction between antioxidants isoenzymes, proline and cell membrane. Afr J Biotechnol. 2012, 11 (78): 14368-14379.
Heath RL, Packer L: Photoperoxidation in isolated chloroplasts I. Kinetics and stoichiometry of fatty acid peroxidation. Arch Biochem Biophys. 1968, 125: 189-10.1016/0003-9861(68)90654-1.
Bhatt D, Saxena SC, Jain S, Dobriyal AK, Majee M, Arora S: Cloning, expression and functional validation of drought inducible ascorbate peroxidase (Ec-apx1) from Eleusine coracana. Mol Biol Rep. 2013, 40 (2): 1155-1165. 10.1007/s11033-012-2157-z.
Sambrook J, Russell DW: Molecular Cloning. A Laboratory Manual. 2001, New York: Cold Spring Harbor, USA, 3
Shevchenko A, Tomas H, Havlis J, Olsen JV, Mann M: In-gel digestion for mass spectrometric characterization of proteins and proteomes. Nat Protoc. 2006, 1: 2856-2860.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ: Basic local alignment search tool. J Mol Biol. 1990, 215: 403-410. 10.1016/S0022-2836(05)80360-2.
Slevers F, Wilm A, Dineen D, Gibson TJ, Karpus K, Li W, Lopez R, Macwiliam H, Remmert M, Sodling J, Thompson JD, Higgins DJ: Fast, scalable generation of high quality protein multiple sequence alignments using Clustal Omega. Mol Syst Biol. 2011, 7: 539-
Tamura K, Dudley J, Nei M, Kumar S: MEGA4: Molecular evolutionary genetics analysis (MEGA) software version 4.0. Mol Biol Evol. 2007, 24: 1596-1599. 10.1093/molbev/msm092.
Sigrist CJA, de Castro E, Cerutti L, Cuche BA, Hulo N, Bridge A, Bougueleret L, Xenarios I: New and continuing developments at PROSITE. Nucleic Acids Res. 2012, 41: 344-347.
Punta M, Coggill PC, Eberhardt RY, Mistry J, Tate J, Boursnell C, Pang N, Forslund K, Ceric G, Clements J, Heger A, Holm L, Sonnhammer ELL, Eddy SR, Bateman A, Finn RD: The Pfam protein families database. Nucleic Acids Res. 2012, 40: 290-301. 10.1093/nar/gkr717.
Marchler-Bauer A, Zheng C, Chitsaz F, Derbyshire MK, Geer LY, Geer RC, Gonzales NR, Gwadz M, Hurwitz DI, Lanczycki CJ, Lu F, Lu S, Marchler GH, Song JS, Thanki N, Yamashita RA, Zhang D, Bryant SH: CDD: conserved domains and protein three- dimensional structure. Nucleic Acids Res. 2013, 41: 348-352. 10.1093/nar/gks1243.
Gasteiger E, Hoogland C, Gattiker A, Duvaud S, Wilkins MR, Appel RD, Bairoch A: Protein Identification and Analysis Tools on the ExPASy Server. The Proteomics Protocols Handbook. Edited by: Walker JM. 2005, New Jersey: Humana, 571-607.
Garnier J, Gibrat JF, Robson B: GOR method for predicting protein secondary structure from amino acid sequence. Methods Enzymol. 1996, 266: 540-553.
Altschul SF, Madden TL, Schäffer AA, Zhang J, Zhang Z, Miller W, Lipman DJ: Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res. 1997, 25: 3389-3402. 10.1093/nar/25.17.3389.
Kelley LA, Sternberg MJE: Protein structure prediction on the web: a case study using the Phyre server. Nat Protoc. 2009, 4: 363-371. 10.1038/nprot.2009.2.
Lambert C, Leonard N, De-Bolle X, Depiereux E: ESyPred3D: Prediction of proteins 3D structures. Bioinformatics. 2002, 18: 1250-1256. 10.1093/bioinformatics/18.9.1250.
Chen CC, Hwang JK, Yang JM: (PS)2: protein structure prediction server. Nucleic Acid Res. 2006, 34: 152-157. 10.1093/nar/gkj420.
Arnold K, Bordoli L, Kopp J, Schwede T: The SWISS-MODEL Workspace: A web- based environment for protein structure homology modelling. Bioinformatics. 2006, 22: 195-201. 10.1093/bioinformatics/bti770.
Bates PA, Kelley LA, MacCallum RM, Sternberg MJE: Enhancement of protein modelling by human intervention in applying the automatic programs 3D-JIGSAW and 3D-PSSM. Proteins. 2001, 45: 39-46. 10.1002/prot.1168.
Zhang Y: I-TASSER server for protein 3D structure prediction. BMC Bioinformatics. 2008, 9: 40-10.1186/1471-2105-9-40.
Laskoswki RA, MacArthur MW, Moss DS, Thorton JM: PROCHECK: a program to check the stereo chemical quality of protein structures. J Appl Crystallogr. 1993, 26: 283-291. 10.1107/S0021889892009944.
Luthy R, Bowie JU, Eisenberg D: Assessment of protein models with three-dimensional profiles. Nature. 1992, 356: 83-85. 10.1038/356083a0.
Benkert P, Kunzli M, Schwede T: QMEAN server for protein model quality estimation. Nucleic Acids Res. 2009, 37: 510-514. 10.1093/nar/gkp322.
DeLano WL: The PyMOL Molecular Graphics System. 2002, DeLano Scientific. California: San Carlos
Gelly JC, Joseph AP, Srinivasan N, de Brevern AG: iPBA: a tool for protein structure comparison using sequence alignment strategies. Nucleic Acids Res. 2011, 39: 18-23.
Laurie AT, Jackson RM: SiteFinder: an energy-based method for the prediction of protein-ligand binding sites. Bioinformatics. 2005, 1909: 1916-
Trott O, Olson AJ: AutoDock Vina: improving the speed and accuracy of docking with a new scoring function, efficient optimization and multithreading. J Comput Chem. 2010, 31: 455-461.
Bolton E, Wang Y, Thiessen PA, Bryant SH: PubChem: Integrated Platform of Small Molecules and Biological Activities. Annual Reports in Computational Chemistry, Volume 4. 2008, Washington, DC: American Chemical Society
O’Boyle NM, Banck M, James CA, Morley C, Vandermeersch T, Hutchison GR: Open Babel: An open chemical toolbox. J Cheminformatics. 2011, 3: 33-10.1186/1758-2946-3-33.
Morris GM, Huey R, Lindstrom W, Sanner MF, Belew RK, Goodsell DS, Olson AJ: Autodock4 and AutoDockTools4: automated docking with selective receptor flexibility. J Comput Chem. 2009, 16: 2785-2791.
Authors are thankful to ICAR (Indian Council of Agricultural Research) for providing financial grant under NICRA (National Initiative on Climate Resilient Agriculture) project. Authors are also thankful to the Project Director for providing facilities to carry out research work and Director, IARI for providing facilities for plant stress related experiments at National Phytotron Facility, IARI, New Delhi.
The authors declare that they have no competing interests.
JCP conceived and designed the experiments and contributed in manuscript preparation. HV carried out the cloning of TapAPX into pET28 vector, western blot analysis and its expression studies in E. coli DH5α and abiotic stress tolerance in E. coli. KB performed cDNA library construction and RACE for full length CDS. RSJ was involved with sequence alignment, phylogenetic analysis, Ramachandran plot, 3D structure generation. GPS has helped in selection and providing of plant material. All authors read and approved the final manuscript.
Electronic supplementary material
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
About this article
Cite this article
Padaria, J.C., Vishwakarma, H., Biswas, K. et al. Molecular cloning and in-silico characterization of high temperature stress responsive pAPX gene isolated from heat tolerant Indian wheat cv. Raj 3765. BMC Res Notes 7, 713 (2014). https://0-doi-org.brum.beds.ac.uk/10.1186/1756-0500-7-713
- Peroxisomal ascorbate peroxidase
- Homology modeling
- cv. Raj3765