Skip to main content

Enrichment of bacteria samples by centrifugation improves the diagnosis of orthopaedics-related infections via real-time PCR amplification of the bacterial methicillin-resistance gene

Abstract

Background

To effectively treat orthopaedic infections by methicillin-resistant strains, an early diagnosis is necessary. Bacterial cultures and real-time polymerase chain reaction (PCR) have been used to define methicillin-resistant staphylococci. However, even when patients display clinical signs of infections, bacterial culture and real-time PCR often cannot confirm infection. The aim of this study was to prospectively compare the utility of real-time PCR for the mecA gene detection following centrifugation of human samples with suspected orthopaedic infections.

Results

In addition to the conventional real-time PCR method, we performed real-time PCR following centrifugation of the sample at 4,830×g for 10 min in a modified real-time PCR (M-PCR) method. We suspended cultured methicillin-resistant Staphylococcus aureus and generated standard dilution series for in vitro experiments. The in vitro detection sensitivity of the M-PCR method was approximately 5.06 times higher than that of the conventional real-time PCR method. We performed bacterial culture, pathological examination, real-time PCR, and M-PCR to examine the infectious fluids and tissues obtained from 36 surgical patients at our hospital. Of these, 20 patients who had undergone primary total hip arthroplasty were enrolled as negative controls. In addition, 15 patients were examined who were clinically confirmed to have an infection, including periprosthetic joint infection (eight patients), pyogenic spondylitis (two patients), infectious pseudoarthrosis (two patients), and after spine surgery (three patients). In one sample from a patient who developed infectious pseudoarthrosis and two samples from surgical site infections after spine surgery, the mecA gene was detected only by the M-PCR method. In one patient with infectious pseudoarthrosis, one patient with infection after arthroplasty, and two patients with purulent spondylitis, the detection sensitivity of the M-PCR method was increased compared with PCR (clinical sample average: 411.6 times).

Conclusions

These findings suggest that the M-PCR method is useful to detect methicillin-resistant strains infections. In addition, the centrifugation process only takes 10 min longer than conventional real-time PCR methods. We believe that the M-PCR method could be clinically useful to detect orthopaedic infections caused by methicillin-resistant strains.

Background

Orthopaedic procedures in particular are associated with a risk of surgical-site infection (SSI) [1]. The incidence of SSI following orthopaedic surgery in Japan is 0.83% for cases of spinal canal stenosis, 0.28% for cases of disc herniation, 0.80% for cases of total hip arthroplasty (THA), and 0.96% for cases of total knee arthroplasty (TKA) [2, 3]. Orthopaedic procedures are also being performed in a growing number of patients with co-morbid conditions such as diabetes mellitus and in increasingly elderly patients, both of which are factors known to increase the risk of SSI [4]. Prosthetic joint infections by multidrug-resistant bacteria comprise one of the most important and complex problems in orthopaedic surgery. The most important and frequently resistant bacteria involved in infection of total joint replacements include methicillin-resistant Staphylococcus aureus (MRSA), methicillin-resistant coagulase-negative Staphylococci, vancomycin-resistant enterococci, multidrug-resistant Pseudomonas aeruginosa, and Acinetobacter baumannii [5]. Although culture of samples remains the standard for identifying most organisms causing infection, diagnoses based on culture suffer from a high rate of false negatives caused by insufficient numbers of viable bacteria and effects of previous antibiotic therapy [6]. To resolve these problems, several techniques, including polymerase chain reaction (PCR) detection, have been developed to obtain results faster and more accurately than by using culture methods [720]. PCR amplification can detect the mecA gene, which gives rise to methicillin-resistance, in orthopaedic prosthetic infections [8, 2126]. Although real-time PCR methods have been exploited for rapid, sensitive, and reproducible detection [27], sensitivity and specificity of the diagnosis using PCR were 87 and 80% in clinical use, respectively [28]. PCR can theoretically detect mecA gene from a single copy of DNA. However, the probability that this single copy would be amplified is low, so many copies are needed to reach a “detection threshold” [13]. We tried to improve the rate of positive identification of the mecA gene in these challenging situations. The aim of this cohort study was to compare the utility of real-time PCR for mecA gene identification in vitro and in clinical samples following centrifugation of samples. We found that centrifugation of these samples improves detection of the mecA gene.

Results

M-PCR improved the mecA gene detection in vitro

We hypothesized that centrifugation would enrich the number of bacteria in the samples, improving detection of the mecA gene of MRS. First, we examined several conditions in which to precipitate cultured MRSA by centrifugation of MRSA-containing phosphate-buffered saline (PBS). We chose to centrifuge at 4,830×g for 10 min. Then we performed conventional PCR and M-PCR using the same MRSA dilution series. M-PCR improved detection of the mecA gene 5.06-fold over that achieved with conventional real-time PCR methods (Figure 1). There was statistical difference between M-PCR and conventional real-time PCR (p < 0.05).

Figure 1
figure 1

M-PCR improved detection of the mecA gene in vitro. To compare the detection sensitivity of the M-PCR method with the conventional real-time PCR method, we created a dilution series using cultured MRSA (×1:1 time; ×10:10 times; ×100:100 times). DNA was purified by conventional methods (A) or following centrifugation (B: M-PCR). Centrifugation promoted more rapid arrival at the threshold cycle (Fluorescence: 0.56). A comparative Ct (ΔCt) analysis was performed to examine fold changes of the mecA gene. The experiment was performed in triplicate with similar results.

M-PCR did not enrich the mecA gene of killed bacteria

It is possible that PCR detects the mecA gene from DNA of killed MRS because killed bacteria release genomic DNA into the extracellular environment by autolysis [29]. Theoretically, genomic DNA of MRSA is too small to be precipitated by centrifugation at 4,830×g for 10 min. In order to examine whether M-PCR increases the detection of released DNA, DNA was first purified from cultured MRSA by DNA purification. We then performed centrifugation of DNA-containing PBS. M-PCR did not increase the sensitivity for detecting the mecA gene (Figure 2). These findings suggest that the released DNA is too small to be precipitated by centrifugation at 4,830×g for 10 min.

Figure 2
figure 2

M-PCR did not increase detection of the mecA gene in purified DNA. To compare the detection sensitivity of the M-PCR method with the conventional real-time PCR method, we made diluent using the purified DNA of MRSA. DNA was first purified from cultured MRSA and dissolved in 5 mL PBS. Next, DNA was purified by conventional methods (A) or following centrifugation (B: M-PCR). A comparative Ct (ΔCt) analysis was performed to examine fold changes of the mecA gene. The results showed that M-PCR did not increase the detection of the mecA gene in purified DNA. The experiment was performed in triplicate with similar results.

M-PCR improved detection of the mecA gene in clinical specimens

We analysed the effusion, joint fluid, or infectious tissues from the infectious sites. The demographic data are summarized in Additional file 1: Table S1. Conventional PCR and M-PCR did not detect the mecA gene from control primary THA samples. Only M-PCR, and not conventional PCR, detected the mecA gene from three clinically infected samples, including one pseudoarthrosis and two surgical site infections following spine surgery (Figure 3). In seven samples, detection of the mecA gene was improved by M-PCR. Overall, M-PCR improved detection of the mecA gene 411.6 (average) times than was achieved with conventional real-time PCR. There was statistical difference between M-PCR and conventional real-time PCR (p < 0.05). The results for all of the clinical samples are summarized in Additional file 2: Table S2.

Figure 3
figure 3

M-PCR improved the detection of mecA gene in clinical samples. To compare the detection sensitivity of the M-PCR method with the conventional real-time PCR method, we analysed infectious tissues collected from patients. DNA was purified by conventional methods (A) or following centrifugation (B: M-PCR). A comparative Ct (ΔCt) analysis was performed to examine fold changes of the mecA gene. Only M-PCR, but not conventional real-time PCR, detected the mecA gene from three clinically infected samples, including one pseudoarthrosis (a). M-PCR improved the detection of the mecA gene 6.96 times higher than conventional real-time PCR methods (b). The experiment was performed in triplicate with similar results.

Discussion

The identification of microorganisms is crucial for the treatment of orthopaedic infections. Conventional bacteriological culture of single samples obtained from infectious sites has a high rate of false-positive and false-negative results [30]. Given the limitations of culture, PCR is often used as an additional diagnostic tool for orthopaedic infections [13, 16, 17, 29, 31]. The overall sensitivity in diagnosing prosthetic joint infections increased to 67% when both PCR and bacterial culture were examined together [16]. Mariani et al. reported that although PCR provides greater sensitivity than standard diagnostic tests, such as culture and pathological examinations [25], the sensitivity of PCR was not high enough (50%). To address this, we tried to improve the detection sensitivity of real-time PCR methods. Our findings show that the sensitivity of the M-PCR method was higher than that of the conventional real-time PCR method both in vitro and in clinical samples. No contaminants were detected in our series, and no mecA gene DNA was found in samples from patients who had undergone primary total hip arthroplasty (i.e., there were no false-positive results). Several agents are available to treat MRSA, including vancomycin, teicoplanin, and daptomycin. Although detection of the mecA gene by PCR could not distinguish between mecA-positive coagulase-negative Staphylococci and MRSA, these anti-MRS agents can be used to treat infection caused by both strains.

One stage or two-stage re-implantation is considered the standard procedure to treat prosthetic joint infections. Many factors affect the outcomes of patients with implant-related infections, including MRSA infections [3235]. In addition, Trisha et al. reported that MRSA were isolated in 45% of all prosthetic joint infections [36]. To address this issue, we attempted to improve the detection sensitivity of the mecA gene. Our findings show that the M-PCR method improves the detection sensitivity of the mecA gene in orthopaedic infections, and it only takes an additional 10 min compared with the conventional real-time PCR method. In addition, it costs very little because most laboratories already own a centrifuge. Enrichment of bacterial DNA by centrifugation for real-time PCR could be useful to evaluate orthopaedic infections, especially after initiating antibiotic therapy, which decreases the number of bacteria.

We showed that M-PCR detected the mecA gene from three clinically infected samples that were not detected by conventional PCR. Culture of these samples could not detect the pathogenic bacteria either. We could administer anti-MRSA antibiotics to these three patients and treat the infection based on the M-PCR results. These findings show that M-PCR is clinically useful.

Although real-time PCR may detect DNA released from dead bacteria, our findings suggest that centrifuging purified bacterial DNA did not improve the rate of detecting the mecA gene using the M-PCR method. These findings indicate that the released DNA fragments were too short to be precipitated by centrifugation at 4,830×g for 10 min.

Several limitations remain to be addressed by the M-PCR approach. Because the number of patients is still low, we do not have enough findings to demonstrate the effectiveness of our M-PCR methods. In addition, centrifugation might increase the collection of bacterial DNA that is still contained within dying or recently dead bacteria. Also, concentrating the specimen may increase the amount of PCR inhibitors and impurities in the extracted DNA and reduce the sensitivity of the PCR. It has been reported that a wide range of bacteria are potentially associated with orthopaedic infections [12, 36]. Further research is required to determine whether M-PCR could be useful to identify other bacteria as well.

Conclusions

Real-time PCR following centrifugation of samples can improve the detection of the mecA gene in orthopaedic infections. It improved the diagnosis of MRS infections and could be used for patients with suspected orthopaedic infections when culture or conventional PCR are negative, and in the diagnosis of patients receiving antimicrobial treatment. Improvements in the mecA gene detection by the M-PCR method may help to treat MRS infections in orthopaedic operations, improving patient outcomes and decreasing costs for the hospital.

Methods

Bacterium

A cultured methicillin-resistant staphylococcal strain that was obtained from patients with MRSA sinus infections was used for the in vitro portion of this study and was a positive control for mecA gene PCR. MRSA was identified by Staphyogram (Terumo, Tokyo, Japan), an identification kit, and the coagulase test. Bacterial colonies were suspended in 5 mL of trypcase soy broth (TSB-ST), 4% NaCl, and 25% glucose. Bacterial culture was performed on a shaker overnight at 37°C.

Patients

In total, 35 patients hospitalized at the Department of Orthopaedic Surgery of Kagoshima University Hospital in Japan were included in this study. Of these, 20 patients who had undergone primary total hip arthroplasty were used as negative controls. In these controls, infection was excluded by negative results from cultures of three surgical samples and normal C-reactive protein levels, white blood cell counts, and the neutrophil count. In addition, 15 patients were examined who were confirmed to have clinically defined infection, including periprosthetic joint infection (eight patients), pyogenic spondylitis (two patients), infectious pseudoarthrosis (two patients), and after spine surgery (three patients). The diagnosis of orthopaedic infections was made based on clinical presentation, laboratory data, and diagnostic imaging. The clinical symptoms were pain, local swelling and heat, tenderness, aspiration of purulent joint fluid, and purulence surrounding the disease site at the time of surgery [37, 38]. Laboratory findings suggestive of biological inflammatory syndrome were an elevated white blood cell count, erythrocyte sedimentation rate (ESR) (>30 mm/h), and C-reactive protein (CRP) (>1 mg/dL). In addition, synovial fluid or three tissues obtained surgically from the infectious site were cultured and examined histopathologically. These samples were placed in sterile tubes in the operating room and sent to our laboratory for bacterial culture and pathologic examination within 24 h. Culture was performed in the routine work of the hospital clinical microbiology laboratory. The clinical and histopathological aspects of our study were also reviewed by a member of the infectious diseases control team and a pathologist.

Ethics statement

This research protocol was approved by the Ethics Committee on Clinical Research at Kagoshima University Hospital (Name of research: Enrichment of bacteria samples by centrifugation improves the diagnosis of orthopaedics-related infections via real-time PCR amplification of the bacterial methicillin-resistance gene; No. 25-115).

DNA extraction from cultured MRSA dilution series

We prepared two dilution series using culture solutions of MRSA. A total of 10 mg of a MRSA colony-containing agar was dissolved in 5 μL of culture medium and then cultured overnight. Then 500 μL of culture medium was added to 4,500 μL of PBS. The tenfold dilution series was prepared using PBS. For conventional PCR, DNA was purified from this dilution series using a QIAamp DNA Mini kit (QIAGEN) as per the manufacturer’s recommendations. Dilution series samples were centrifuged at 4,830×g for 10 min before DNA extraction for the M-PCR technique. The supernatants were discarded and the pellets dissolved in 200 µL of PBS. The DNA was purified using a QIAamp DNA Mini kit as per the manufacturer’s recommendations.

DNA extraction from killed MRSA

For the killed bacterium DNA detection assay, DNA was first purified from cultured MRSA using a DNA purification kit (QIAamp DNA Mini kit) as per the manufacturer’s recommendations. We then dissolved a purified DNA by PBS. Samples were centrifuged at 4,830×g for 10 min before DNA extraction for the M-PCR technique. The supernatants were discarded, and the pellets were dissolved in 200 µL PBS, as before. Finally, DNA was purified using a QIAamp DNA Mini kit.

DNA extraction from clinical specimens

Clinical samples (0.4 g) were divided into smaller pieces by scissors. These cleaved samples were dissolved in 10 mL of PBS. Sonication was then performed at 20 kHz for 10 min (Tomy Seiko Co. Ltd., Tokyo, Japan). For conventional PCR, 200 μL of the sample containing PBS was used. For M-PCR, 9,800 μL of the sample containing PBS was centrifuged at 4,830×g for 10 min before DNA extraction. The supernatants were discarded and the pellets dissolved in 200 µL PBS. DNA was extracted following the manufacture’s recommendations (QIAamp DNA Mini kit). DNA extracts were reconstituted in a final volume of 50 µL and stored at −20°C.

Real-time PCR

The extracted DNA samples were examined by real-time PCR using the LightCycler® system (Roche Diagnostics, Mannheim, Germany). The LightCycler MRSA Detection Kit provides primers and probes for amplification and sequence-specific detection of the mecA gene. Five microlitres of the extracted DNA elution was added to the master mix at a final volume of 20 µL for each reaction. The real-time PCR reaction was performed following the kit manufacture’s recommendations. Briefly, the cycling conditions were a hot start at 95°C for 10 min, followed by 45 cycles of denaturation at 95°C for 10 s, annealing at 55°C for 10 s, and extension at 72°C for 12 s.

We also synthesized our own primers for the mecA gene and performed real-time PCR because the LightCycler® MRSA Detection Kit has been discontinued. We used the Eco™ Real-time PCR System (Illumina, San Diego, CA, USA), and the primer was designed for the mecA gene as previously reported [39]. The forward and reverse primer sequences were: 5′-TGCTATCCACCCTCAAACAGG-3′ and 5′-AACGTTGTAACCACCCCAAGA-3′. The PCR mixtures totalled 20 μL per reaction, and consisted of 10 μM concentration of each primer and 10 μL of 2× Fast SYBR® Green Master Mix (Life Technologies Corporation, Carlsbad, SD). We added 2 μL of the extracted DNA to the PCR mixture. Reaction mixtures were incubated at 95°C for 20 s followed by 40 cycles of 95°C for 3 s and 60°C for 20 s. We used the cultured MRSA as the positive control and nuclease-free water as the negative control.

Statistical analysis

A Statistical differences between groups were assessed by Mann–Whitney’s U test (Microsoft, Albuquerque, NM, USA). All statistical analyses were performed using and Excel Statics 2012 (SSRI, Osaka, Japan).

Patient consent

Written informed consent was obtained from patients and their families to publish this report. Copies of the written consent forms are available for review by the Editor-in-Chief of the journal.

Abbreviations

PCR:

polymerase chain reaction

M-PCR:

modified polymerase chain reaction

MRSA:

methicillin-resistant Staphylococcus aureus

PBS:

phosphate-buffered saline

ESR:

erythrocyte sedimentation rate

CRP:

C-reactive protein

References

  1. Goyal N, Miller A, Tripathi M, Parvizi J (2013) Methicillin-resistant Staphylococcus aureus (MRSA): colonisation and pre-operative screening. Bone Joint J 95-B(1):4–9

    Article  CAS  PubMed  Google Scholar 

  2. Imai E, Ueda M, Kanao K, Miyaki K, Kubota T, Kitajima M (2005) Surgical site infection surveillance after open gastrectomy and risk factors for surgical site infection. J Infect Chemother Off J Jpn Soc Chemother 11(3):141–145

    Article  Google Scholar 

  3. Nagano S, Yokouchi M, Setoguchi T, Sasaki H, Shimada H, Kawamura I et al (2014) Analysis of surgical site infection after musculoskeletal tumor surgery: risk assessment using a new scoring system. Sarcoma 2014:645496

    Article  PubMed Central  PubMed  Google Scholar 

  4. Knaepler H (2012) Local application of gentamicin-containing collagen implant in the prophylaxis and treatment of surgical site infection in orthopaedic surgery. Int J Surg 10(Suppl 1):S15–S20

    Article  PubMed  Google Scholar 

  5. Bulla F, Filippini P (2010) Prosthetic joint infections by multi-drug resistant bacteria. Infez Med 18(1):5–11

    PubMed  Google Scholar 

  6. Bernard L, Lubbeke A, Stern R, Bru JP, Feron JM, Peyramond D et al (2004) Value of preoperative investigations in diagnosing prosthetic joint infection: retrospective cohort study and literature review. Scand J Infect Dis 36(6–7):410–416

    Article  PubMed  Google Scholar 

  7. Dora C, Altwegg M, Gerber C, Bottger EC, Zbinden R (2008) Evaluation of conventional microbiological procedures and molecular genetic techniques for diagnosis of infections in patients with implanted orthopedic devices. J Clin Microbiol 46(2):824–825

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  8. Tunney MM, Patrick S, Curran MD, Ramage G, Hanna D, Nixon JR et al (1999) Detection of prosthetic hip infection at revision arthroplasty by immunofluorescence microscopy and PCR amplification of the bacterial 16S rRNA gene. J Clin Microbiol 37(10):3281–3290

    CAS  PubMed Central  PubMed  Google Scholar 

  9. Sauer P, Gallo J, Kesselova M, Kolar M, Koukalova D (2005) Universal primers for detection of common bacterial pathogens causing prosthetic joint infection. Biomed Pap Med Fac Univ Palacky Olomouc Czech 149(2):285–288

    Article  CAS  Google Scholar 

  10. Dempsey KE, Riggio MP, Lennon A, Hannah VE, Ramage G, Allan D et al (2007) Identification of bacteria on the surface of clinically infected and non-infected prosthetic hip joints removed during revision arthroplasties by 16S rRNA gene sequencing and by microbiological culture. Arthritis Res Therap 9(3):R46

    Article  Google Scholar 

  11. Fihman V, Hannouche D, Bousson V, Bardin T, Liote F, Raskine L et al (2007) Improved diagnosis specificity in bone and joint infections using molecular techniques. J Infect 55(6):510–517

    Article  CAS  PubMed  Google Scholar 

  12. Moojen DJ, Spijkers SN, Schot CS, Nijhof MW, Vogely HC, Fleer A et al (2007) Identification of orthopaedic infections using broad-range polymerase chain reaction and reverse line blot hybridization. J Bone Joint Surg 89(6):1298–1305

    Article  PubMed  Google Scholar 

  13. Gallo J, Kolar M, Dendis M, Loveckova Y, Sauer P, Zapletalova J et al (2008) Culture and PCR analysis of joint fluid in the diagnosis of prosthetic joint infection. New Microbiol 31(1):97–104

    PubMed  Google Scholar 

  14. Kobayashi N, Procop GW, Krebs V, Kobayashi H, Bauer TW (2008) Molecular identification of bacteria from aseptically loose implants. Clin Orthop Relat Res 466(7):1716–1725

    Article  PubMed Central  PubMed  Google Scholar 

  15. Vandercam B, Jeumont S, Cornu O, Yombi JC, Lecouvet F, Lefevre P et al (2008) Amplification-based DNA analysis in the diagnosis of prosthetic joint infection. J Mol Diagn 10(6):537–543

    Article  PubMed Central  PubMed  Google Scholar 

  16. De Man FH, Graber P, Luem M, Zimmerli W, Ochsner PE, Sendi P (2009) Broad-range PCR in selected episodes of prosthetic joint infection. Infection 37(3):292–294

    Article  PubMed  Google Scholar 

  17. Kobayashi N, Inaba Y, Choe H, Iwamoto N, Ishida T, Yukizawa Y et al (2009) Rapid and sensitive detection of methicillin-resistant Staphylococcus periprosthetic infections using real-time polymerase chain reaction. Diagn Microbiol Infect Dis 64(2):172–176

    Article  CAS  PubMed  Google Scholar 

  18. Achermann Y, Vogt M, Leunig M, Wust J, Trampuz A (2010) Improved diagnosis of periprosthetic joint infection by multiplex PCR of sonication fluid from removed implants. J Clin Microbiol 48(4):1208–1214

    Article  PubMed Central  PubMed  Google Scholar 

  19. Riggio MP, Dempsey KE, Lennon A, Allan D, Ramage G, Bagg J (2010) Molecular detection of transcriptionally active bacteria from failed prosthetic hip joints removed during revision arthroplasty. Eur J Clin Microbiol Infect Dis 29(7):823–834

    Article  CAS  PubMed  Google Scholar 

  20. Marin M, Garcia-Lechuz JM, Alonso P, Villanueva M, Alcala L, Gimeno M et al (2012) Role of universal 16S rRNA gene PCR and sequencing in diagnosis of prosthetic joint infection. J Clin Microbiol 50(3):583–589

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  21. Montanaro L, Arciola CR, Borsetti E, Brigotti M, Baldassarri L (1998) A polymerase chain reaction (PCR) method for the identification of collagen adhesin gene (CNA) in Staphylococcus-induced prosthesis infections. New Microbiol 21(4):359–363

    CAS  PubMed  Google Scholar 

  22. Roggenkamp A, Sing A, Hornef M, Brunner U, Autenrieth IB, Heesemann J (1998) Chronic prosthetic hip infection caused by a small-colony variant of Escherichia coli. J Clin Microbiol 36(9):2530–2534

    CAS  PubMed Central  PubMed  Google Scholar 

  23. Montanaro L, Arciola CR, Baldassarri L, Borsetti E (1999) Presence and expression of collagen adhesin gene (cna) and slime production in Staphylococcus aureus strains from orthopaedic prosthesis infections. Biomaterials 20(20):1945–1949

    Article  CAS  PubMed  Google Scholar 

  24. Mariani BD, Martin DS, Levine MJ, Booth RE Jr, Tuan RS (1996) The Coventry Award. Polymerase chain reaction detection of bacterial infection in total knee arthroplasty. Clin Orthop Relat Res 331:11–22

    Article  PubMed  Google Scholar 

  25. Levine MJ, Mariani BA, Tuan RS, Booth RE Jr (1995) Molecular genetic diagnosis of infected total joint arthroplasty. J Arthrop 10(1):93–94

    Article  CAS  Google Scholar 

  26. Mariani BD, Levine MJ, Booth RE Jr, Tuan RS (1995) Development of a novel, rapid processing protocol for polymerase chain reaction-based detection of bacterial infections in synovial fluids. Mol Biotechnol 4(3):227–237

    Article  CAS  PubMed  Google Scholar 

  27. Mackay IM (2004) Real-time PCR in the microbiology laboratory. Clin Microbiol Infect Off Publ Eur Soc Clin Microbiol Infect Dis 10(3):190–212

    CAS  Google Scholar 

  28. Kobayashi N, Inaba Y, Choe H, Aoki C, Ike H, Ishida T et al (2009) Simultaneous intraoperative detection of methicillin-resistant Staphylococcus and pan-bacterial infection during revision surgery: use of simple DNA release by ultrasonication and real-time polymerase chain reaction. J Bone Joint Surg 91(12):2896–2902

    Article  PubMed  Google Scholar 

  29. Fenollar F, Roux V, Stein A, Drancourt M, Raoult D (2006) Analysis of 525 samples to determine the usefulness of PCR amplification and sequencing of the 16S rRNA gene for diagnosis of bone and joint infections. J Clin Microbiol 44(3):1018–1028

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  30. Bernard L, Sadowski C, Monin D, Stern R, Wyssa B, Rohner P et al (2004) The value of bacterial culture during clean orthopedic surgery: a prospective study of 1,036 patients. Infect Control Hosp Epidemiol 25(6):512–514

    Article  PubMed  Google Scholar 

  31. Tarkin IS, Dunman PM, Garvin KL (2005) Improving the treatment of musculoskeletal infections with molecular diagnostics. Clin Orthop Relat Res 437:83–88

    Article  PubMed  Google Scholar 

  32. Moran E, Masters S, Berendt AR, McLardy-Smith P, Byren I, Atkins BL (2007) Guiding empirical antibiotic therapy in orthopaedics: The microbiology of prosthetic joint infection managed by debridement, irrigation and prosthesis retention. J Infect 55(1):1–7

    Article  CAS  PubMed  Google Scholar 

  33. Salgado CD, Dash S, Cantey JR, Marculescu CE (2007) Higher risk of failure of methicillin-resistant Staphylococcus aureus prosthetic joint infections. Clin Orthop Relat Res 461:48–53

    PubMed  Google Scholar 

  34. Barberan J, Aguilar L, Carroquino G, Gimenez MJ, Sanchez B, Martinez D et al (2006) Conservative treatment of staphylococcal prosthetic joint infections in elderly patients. Am J Med 119(11):993 e997–993 e910

    Article  Google Scholar 

  35. Drancourt M, Stein A, Argenson JN, Zannier A, Curvale G, Raoult D (1993) Oral rifampin plus ofloxacin for treatment of Staphylococcus-infected orthopedic implants. Antimicrob Agents Chemother 37(6):1214–1218

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  36. Peel TN, Cheng AC, Buising KL, Choong PF (2012) Microbiological aetiology, epidemiology, and clinical profile of prosthetic joint infections: are current antibiotic prophylaxis guidelines effective? Antimicrob Agents Chemother 56(5):2386–2391

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  37. Trampuz A, Osmon DR, Hanssen AD, Steckelberg JM, Patel R (2003) Molecular and antibiofilm approaches to prosthetic joint infection. Clin Orthop Relat Res 414:69–88

    Article  PubMed  Google Scholar 

  38. Berbari EF, Marculescu C, Sia I, Lahr BD, Hanssen AD, Steckelberg JM et al (2007) Culture-negative prosthetic joint infection. Clin Infect Dis 45(9):1113–1119

    Article  PubMed  Google Scholar 

  39. Okuma K, Iwakawa K, Turnidge JD, Grubb WB, Bell JM, O’Brien FG et al (2002) Dissemination of new methicillin-resistant Staphylococcus aureus clones in the community. J Clin Microbiol 40(11):4289–4294

    Article  CAS  PubMed Central  PubMed  Google Scholar 

Download references

Authors’ contributions

TS conceived and designed the experiments. AT and NK performed the experiments. SN, YI, SK, and TS analysed the data. MY, KH, and AT contributed reagents/materials/analysis tools. TS and SK wrote the manuscript. All authors read and approved the final manuscript.

Acknowledgements

We are grateful to Hui Gao for excellent technical assistance. We thank Edanz Editing Japan (Fukuoka, Japan) that provided medical writing services.

Compliance with ethical guidelines

Competing interests The authors declare that they have no competing interests.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Takao Setoguchi.

Additional information

Arisa Tsuru and Takao Setoguchi contributed equally

Additional files

Additional file 1:

Table S1. Clinicopathological data of the patients. Grey lines show the positive findings for infection.

Additional file 2:

Table S2. Summary of the clinical results.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tsuru, A., Setoguchi, T., Kawabata, N. et al. Enrichment of bacteria samples by centrifugation improves the diagnosis of orthopaedics-related infections via real-time PCR amplification of the bacterial methicillin-resistance gene. BMC Res Notes 8, 288 (2015). https://0-doi-org.brum.beds.ac.uk/10.1186/s13104-015-1180-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s13104-015-1180-2

Keywords