A comparison of the protein-coding genomes of two green sulphur bacteria, Chlorobium tepidum TLS and Pelodictyon phaeoclathratiforme BU-1

Abstract

Background

Chlorobium tepidum and Pelodictyon phaeoclathratiforme are organisms within the green sulphur bacteria family, Chlorobiaceae, occupying very different habitats. It has recently been proposed that the genera Chlorobium and Pelodictyon are synonymous.

Results

To investigate generic boundaries for the two species, protein families were predicted computationally based on sequence similarity across the genome-wide protein sets of Chlorobium tepidum TLS and Pelodictyon phaeoclathratiforme BU-1. The distribution of the resulting protein families across the two species was summarized. The largest number of families exhibited 1:1 putative orthology between the two species (1468 families). Of families unique to one of the species, the largest number was unique to P. phaeoclathratiforme (113 families), of which the largest family contained pentapeptide repeat proteins (16 proteins). Families unique to P. phaeoclathratiforme also included a family of gas vesicle synthesis proteins (four proteins). Although only seven families were identified as containing paralogous proteins in both species (with two or more proteins in each species), this group included families of major biochemical importance. One such family, with three members in each species, contained magnesium chelatase, an enzyme involved in the chlorophyll biosynthetic pathway.

Conclusion

The unique protein family groups in both C. tepidum and P. phaeoclathratiforme mirror the occupancy of different environments, while key shared family groups provide evidence for a common origin for the species, as previously suggested in the literature. The current study only uses sequence similarity-based protein families for the two species. This, alone, does not permit a firm conclusion to be drawn on the taxonomic question, of whether the two species belong in one genus or two.

Background

The family Chlorobiaceae, commonly known as green sulphur bacteria, has a complex taxonomic history. Organisms have conventionally been classified within this family by morphological and phenotypic characteristics [1]. This anoxygenic phototrophic bacterial family uniquely contains chlorosomes, structures for harvesting light. Fenna–Matthews–Olson protein, another protein unique to this family’s system, is then used to mediate the transfer of energy between the chlorosomes and photosynthetic reaction centre. More recently, researchers have looked beyond morphological and phenotypic characteristics to identify relationships within this family through phylogeny reconstructions based on the sequences of the Fenna–Matthews–Olson protein and 16S rRNA [2]. Originally, within this family there have been the genera Chlorobium and Pelodictyon. As a result of these molecular phylogenetic analyses, there has been a shift to regard these two genera as synonymous [1, 2]. To analyse this relationship on a broader genomic scale, the current study examines protein family membership across the genome-wide protein sets of one strain from each of the original genera, Chlorobium tepidum TLS and Pelodictyon phaeoclathratiforme BU-1.

Since these two bacteria are found within the same family, and arguably within the same genus, they have very similar morphological, phenotypic and genotypic characteristics. The distinctions between the two provide insight into their evolutionary history and key characteristics of the species.

P. phaeoclathratiforme BU-1 was first identified in 1989 as a strain of rod-shaped single celled bacteria. At the time of species specification, the presence of a gas vacuole, its immobility and its characteristic net-like colony structure identified it as a member of Pelodictyon. Although it is a green sulphur bacterium, it is brown in colour. It is similar in morphology, cytology and physiology to P. clathratiforme in all but its photosynthetic pigments, the latter displaying the green phenotype [3]. The genome contains over 3,000,000 base pairs, with approximately 2700 protein-coding genes [4].

C. tepidum was first isolated in 1991 in hot springs of high acidity and sulphide composition. The TLS strain was sequenced in 2002 [5]. It is the only thermophilic Chlorobium, optimally growing at a temperature of 48 °C. Its circular DNA contains over 2 million base pairs, with approximately 2250 protein-coding genes [5].

To investigate the extent of genome-wide similarities and differences between the two species, sequence similarity-based protein families were predicted using OrthoMCL, which delimits groups of similar proteins on the basis of BLAST results. OrthoMCL does not assign proteins present in only one copy in a single species to a family [6].

Analysis of these two species, through the protein families for which their genomes code, will provide insight into their defining characteristics, and constitutes preliminary research on the taxonomic standing of the two genera.

Results

Investigation of the two green sulphur bacteria, C. tepidum TLS and P. phaeoclathratiforme BU-1, was done through the analysis of sequence similarity-based protein families delimited by OrthoMCL. Where a protein family spanned both species, the members in one species were assumed to be orthologs of the members in the other species. Where a protein family contained multiple proteins within one species, these proteins were assumed to be paralogs.

Under these assumptions, there were a larger number of families of paralogous proteins unique to P. phaeoclathratiforme (113 families) than those families that solely contain proteins from C. tepidum (13 families). Within these purely paralogous families, those found in P. phaeoclathratiforme were larger than those of C. tepidum, with mean protein counts per family 3.186 ± 2.32 (SD) and 2.308 ± 0.63, respectively (Table 1).

Table 1 Comparisons of the spread of counts of sequence similarity-based protein families across Chlorobium tepidum (‘cct’) and Pelodictyon phaeoclathratiforme (‘ppb’), for Uniprot protein sets

The paralogous families found unique to one species give insight into molecular pathways important to the survival of that particular species. The fact that the family is unique to the species suggests it may have a role in its environment, not relevant to the environment of the other species. That there are paralogs, rather than a single copy, could indicate subfunctionalisation, neofunctionalisation, or the requirement for a high level of gene expression. For example, OrthoMCL Group 1 contains 16 pentapeptide repeat proteins from the P. phaeoclathratiforme genome-wide protein set (Table 2; each family has an arbitrary group number, assigned by OrthoMCL and unique within this study; groups are given in Additional file 1). They are predicted to have a beta-helix structure [7], but the function of these proteins has yet to be identified. These proteins have been identified in cyanobacteria, bacteria and plants, however they are absent in C. tepidum [7].

Table 2 The main function and protein counts of sequence similarity-based protein families between Chlorobium tepidum (‘cct’) and Pelodictyon phaeoclathratiforme (‘ppb’), for Uniprot protein sets

There is also a family of paralogous proteins unique to P. phaeoclathratiforme which contain vesicle synthesis proteins (Table 2). P. phaeoclathratiforme uses the gas vesicle as buoyancy control in the water [3]. Although the presence of a gas vesicle is no longer used to identify genera, it is a characteristic of P. phaeochlathratiforme that, as seen from our results as well as the literature [5, 8], is not found in C. tepidum.

The greatest number of families exhibited a 1:1 orthologous relationship between the species (1468 families, including 54 % of P. phaeoclathratiforme proteins and 65.2 % of C. tepidum proteins; Table 1). This large number of 1:1 orthologs supports that these two species share a common origin. This is to be expected, especially as they are now classed within the same genus [2].

There were a larger number of families containing multiple C. tepidum proteins and only one P. phaeoclathratiforme protein, than families containing multiple P. phaeoclathratiforme proteins and one C. tepidum protein (Table 1). Overall, neither of these conditions were very prevalent; 0.756 % of C. tepidum and 0.261 % of P. phaeoclathratiforme proteins were found in the groups containing multiple copies of C. tepidum and 1.47 % of C. tepidum and 2.83 % of P. phaeoclathratiforme proteins were found in the groups containing multiple copies of P. phaeoclathratiforme. An example is Group 19, which contains one P. phaeoclathratiforme protein and four C. tepidum proteins (Table 2). These are beta-barrel structural membrane proteins, some of which are hemagglutinin-related proteins [4, 5]. The increase in membrane protein paralogs in C. tepidum may be correlated with the structural integrity of the membrane and the ability to live as a thermophile.

There were also very few families containing paralogs for both species (7 families, 0.667 % of C. tepidum proteins and 0.633 % of P. phaeoclathratiforme proteins; Table 1). One example is Group 12, which contains magnesium chelatases and methyltransferases involved in the chlorophyll and bacteriochlorophyll biosynthetic pathways [4, 5]. Multiple paralogs in an ortholog group suggest a speciation event happened in evolutionary history after multiple gene-specific duplications took place (i.e. these sequences are out-paralogs [9]), or that the gene-specific duplications were novel to each species and resulted in subfunctionalisation or neofunctionalisation separately.

The results of this study confirm the relationship between the two green sulphur bacteria, C. tepidum TLS and P. phaeoclathratiforme BU-1, as well as highlighting defining characteristics of the two.

Our analysis is preliminary. We have used only sequence similarity-based protein families delimited by OrthoMCL to make inferences about orthology and paralogy. Other methods could lead to different results [10]. Beyond this methodological point, our suggestions for further work include analysis of the ungrouped proteins (30.5 % of C. tepidum proteins and 28.2 % of P. phaeoclathratiforme proteins; Table 1). These are not represented in the protein families analysed in the current paper, but may play a role in the overall differences between the two species. A function-specific search through the groups would also provide greater insight into the well-known differences between the two species, for example in photosynthetic pigments. Comparisons of other species within this combined genus will also lead to a greater understanding of the extent of similarities and differences in gene content; a similar analysis could be performed for two entirely different genera of bacteria within another family, to provide a base-line example of the extent of variation in gene content within and between two accepted genera. Using other proteins, unrelated to 16S rDNA and Fenna-Matthews-Olson protein, for the production of phylogenetic trees will increase the reliability of the results, as there were still some discrepancies between the phylogenetic trees produced [2]. This would then lead to a stronger basis for classification and taxonomy.

Methods

For the delimitation and investigation of protein families, analyses were performed using the 4273π variant of the Raspbian Linux operating system [11] running on Raspberry Pi Model B hardware.

Acquisition of the genome-wide protein sets

The Fasta-format protein sets of C. tepidum and P. phaeoclathratiforme were downloaded from the UniProt database (http://www.uniprot.org; Additional files 2, 3) in early October 2014. For comparison, protein sets were also downloaded from Ensembl Genomes (Release 23, http://ensemblgenomes.org; Additional files 4, 5). Results reported are based on the UniProt data, however the complementary files for analyses using Ensembl Genomes data are also provided (Additional files 4, 5, 6, 7, 8, 9, 10, 11, 12).

Protein family delimitation

The genome-wide protein sets of the two species were analysed using OrthoMCL software (http://orthomcl.org) [6] with MCL [12]. Steps were followed as laid out in the protocol from the OrthoMCL User Guide (also available at http://orthomcl.org), using default parameters with the exception that the ‘all-versus-all’ NCBI BLAST [13] was run with the BLOSUM45 substitution matrix. The sequence similarity-based protein families (‘orthologous groups’) output by OrthoMCL were stored in a file, groups.txt (Additional file 1). The OrthoMCL output was verified by bl2seq searches on random groups (selected using the random function in Microsoft Excel), on the expectation that sequences within a group should show strong evidence of homology. This was the case (E = 10⁻¹¹⁹, 8 × 10⁻⁷⁸, and 6 × 10⁻⁶³ and identity = 85, 48 and 33 % for Groups 119, 696 and 96 respectively).

Protein family analysis

Since OrthoMCL only produces families of proteins, Perl scripts were written [14] to analyse their distribution across the two species (Additional files 13, 14, 15, 16, 17, 18). Counts were verified using a script written independently [15]. Protein functions and structures were obtained through Web access to the Uniprot (http://www.uniprot.org) and InterPro (http://www.ebi.ac.uk/interpro) databases in November 2014.

Protein function analysis

The function of any protein family containing four or more proteins within a group was analysed. Any protein group that contained exclusively uncharacterised proteins, of which there are 16 groups, was excluded from the results in Table 2 and assigned to Table S1 (Additional file 19).