 Research article
 Open Access
 Published:
Handling missing items in the Hospital Anxiety and Depression Scale (HADS): a simulation study
BMC Research Notes volume 9, Article number: 479 (2016)
Abstract
Background
The Hospital Anxiety and Depression Scale (HADS) is a widely used questionnaire in health research, but there is little guidance on how to handle missing items. We aimed to investigate approaches to handling item nonresponse, varying sample size, proportion of subjects with missing items, proportion of missing items per subject, and the missingness mechanism.
Methods
We performed a simulation study based on anxiety and depression data among cancer survivors and patients. Item level data were deleted according to random, demographic, and subscale dependent missingness mechanisms. Seven methods for handling missing items were assessed for bias and imprecision. Imputation, imputation conditional on the number of nonmissing items, and complete case approaches were used. One thousand datasets were simulated for each parameter combination.
Results
All methods were most sensitive when missingness was dependent on the subscale (i.e., higher values of depression leads to higher levels of missingness). The worst performing approach was to analyze only individuals with complete data. The best performing imputation methods depended on whether inference was targeted at the individual or at the population.
Conclusions
We recommend the ‘half rule’ using individual subscale means when using the HADS scores at the individual level (e.g. screening). For population inference, we recommend relaxing the requirement that at least half the items be answered to minimize missing scores.
Background
The Hospital Anxiety and Depression Scale (HADS) [1] is a widely used questionnaire in health research. A 14item questionnaire with two subscales, researchers have used the subscales separately, or as a composite score to measure or screen for distress, in various fields including oncology, cardiology, psychology and psychiatry, both in research and clinical capacities [2]. It has been shown to be valid and reliable in a variety of settings [3]. Despite its widespread use, and multiple investigations into its validity [4], there are no guidelines for how to handle missing items and users must make adhoc decisions about what to do about missing items.
Missing data is ubiquitous in human research, both in randomized trials and observational studies; whether the design is longitudinal or crosssectional. In longitudinal designs research participants may be lost to followup or may intermittently skip assessments, so that their entire questionnaires are missing. In both longitudinal and cross sectional designs participants may skip individual items on questionnaires. Both of these types of missingness have two possible implications: (1) reduced sample size and therefore lower power and (2) bias, if the missingness is nonrandom [5]. It is difficult to know exactly how researchers handle missing HADS items in practice. The most common approach for missing outcomes in RCTs, however, is complete case analysis, i.e., discarding data which are not complete [6]. If this is true for item level missingness, researchers are at risk of bias and imprecision in estimation, depending on the amount of missing item data.
If an item is missing, the entire subscale or questionnaire could be deemed missing, a method sometimes called case deletion or complete case. This has the effect of reducing sample size. If items are missing randomly, for example, because a subject did not see the item and therefore did not answer it, only power is affected. If items are missing nonrandomly, however, excluding the subject’s entire score is likely to result in bias. For example, if subjects who are more anxious are less likely to answer all the questions, and a case deletion rule was used, anxiety could be underestimated. This is an example of subscale dependent missingness. Missingness may also depend on other factors, such as subject characteristics like demographics, risk factors, or health variables (for example, if men are more likely to have nonmissing items than women). This is an example of demographic dependent missingness. In addition to case deletion, filling in missing item values, or imputation, is another missing item approach. Imputing missing items may take care of both power and bias issues, but there are several possible imputation methods, as detailed below, and the best one for the HADS has not been determined.
The lack of guidance on how to handle missing items in the HADS is in contrast to two wellknown questionnaires, the Functional Assessment of Cancer Therapy General (FACTG) which measures quality of life for cancer patients and the SF36, which measures wellbeing in the general population. The recommended method for these questionnaires for missing items is to replace the missing items with the mean of the answered items in the subscale, if at least half of that subscale has been answered [7–9]. This is sometimes called the halfrule, and is appealing because it is simple, is not sample dependent and can be performed at the time of questionnaire scoring. The rationale behind the halfrule is that an individual’s score would not have enough information to be valid if fewer items than half were answered. It is unknown how most HADS users handle item nonresponse. Jörngården et al. use the halfrule; an education and health psychology company’s website states that a mean imputation may be used, but only in the case of a single missing item (if more than one item is missing they state that the subscale is invalid). Multiple imputation is an approach that has been investigated and found to have good properties [10, 11], although implementation for outcomes research can be challenging [10, 12], and it could not be used for most screening situations. Other approaches that could be used for missing items include imputing the missing item with: the mean of the nonmissing items of the entire scale for a subject; the mean of the nonmissing items of the subscale from which the item is missing, for a subject; the mean of the item over all subjects; and multiple imputation [13].
The question of how to handle missing items for outcomes research has not received as much attention as missing forms, which has a rich history of statistical investigation, and poses different challenges. However, there have been some investigations into missing items for outcomes research. Fayers and colleagues [14] discuss missing items in a quality of life context and give guidelines about imputation, for example, showing when a simple item mean imputation may cause bias. Fairclough and Cella [7] performed an indepth investigation of various approaches for handling missing items in the FACTG, resulting in the current recommendations for use of the halfrule.
In order to make valid inferences using the HADS, a principled, evidencebased method of handling missing items is needed. The objective of this study was to investigate seven approaches to handling item nonresponse, using a large sample of Australian cancer patients and survivors to base simulations on, while assessing sensitivity to overall sample size, proportion of subjects with missing items, the proportion of missing items per subject, and the missingness mechanism.
Methods
We carried out a simulation study based on real data (described below). One thousand datasets were simulated for each parameter combination: three sample sizes, three missingness mechanisms, three subjectlevel probabilities for having a missing item, two itemlevel probabilities for missingness. Description of these parameters follows.
Data sources
The data originated from two large, related, Australian studies investigating patient reported outcomes, including anxiety and depression, amongst Arabic, Chinese and Greek immigrants as compared to AngloAustralians cancer survivors and patients. These studies have been described previously [15, 16]. Briefly, the first study recruited survivors from registries (N = 596, response rate = 26 %); the second involved patients, and was hospital based (N = 845, response rate = 61 %). There were 593 AngloAustralians, 202 Arabic participants, 389 Chinese participants and 257 Greeks participants. Participants had a mix of cancer diagnoses including breast (20 %), colorectal (17 %) and prostate (14 %). Males made up 46 % of the sample. Age ranged from 19 to 87 years with a mean of 63 and standard deviation of 11.8. Immigrants had the choice of completing the form in either English or their native language. Out of the 1441 HADS questionnaires, 1385 (96 %) were complete. Along with the HADS, quality of life was assessed using the Functional Assessment of Cancer TherapyGeneral (FACTG), a 27item questionnaire covering aspects of physical, social, family, emotional, and functional wellbeing [17].
Sample size
Beginning with the complete data set (n = 1385), a random sample of subjects was selected, with replacement. We chose starting sample sizes based on detecting standardized effects, d, considered to be large (d = 0.8, n = 52), medium (d = 0.5, n = 128), or small (d = 0.2, n = 788), according to Cohen’s criteria [18], and assuming a 2sided t test with 80 % power and type I error rate of 0.05.
Missingness
To create missingness, items were deleted from the complete data in three ways (i.e., there were three missingness mechanisms): (1) completely random; (2) based on demographic information or (3) based on the subscale’s value (higher values were more likely to be deleted). To mimic the real situation where missing items are clustered by subject, each of the methods used a procedure, based on the missingness mechanism, to select p_{sub} = 10, 20 or 50 % of the subjects to be candidates for item deletion, as detailed below. The probability of missing items within these candidates was then set at p_{item} = 20 or 50 % and item deletion followed by drawing random uniform numbers for each item (range 0–1). If the probability of missing items was set at 20 %, for example, then all items with a random number less than 0.2 would be deleted. The procedure of selecting candidates for missingness (with probability p_{sub}) and then randomly selecting items for deletion (with probability = p_{item}) resulted in overall missing item rates of 2, 4, 5, 10 and 25 %. These values were chosen to provide a range of missing rates: smaller values that mimicked our data as well as higher values that would discriminate between the methods. The steps of the simulation are shown in Fig. 1.
Random missingness was induced by drawing a random number from the uniform distribution (range 0–1) for each subject. Item deletion within these subjects was then performed by randomly selecting items for deletion with probabilities p_{item} = 20 or 50 %, as described above.
Subscale dependent missingness was carried out by choosing candidates for missingness based on higher subscale scores, so that subjects with higher anxiety, for example, were more likely to have missing items. The highest 10 % (for example) of anxious subjects were candidates for item deletion, which was performed as described above.
Demographic missingness was achieved by increasing the likelihood of deletion based on older age, being on treatment, being male, or being an immigrant. Specifically, each subject’s probability of missing any item (being a missingness candidate) was calculated from a logistic model using the above demographic variables. Subjects with the highest probabilities (e.g., if p_{sub} = 10 %, we used the top 10 %) were then candidates for missing items and item deletion was carried out as in the previous method. The demographic variables were chosen based on predictors of missingness in the original dataset (n = 1441). These variables are specific to our dataset; other datasets are likely to have different predictors of missingness.
Imputation and scoring
For each dataset there were six ways of imputing missing items: (1) subject’s mean; (2) subject’s subscale mean; (3) subject’s subscale mean if at least half of items were answered (the socalled halfrule); (4) item mean (across all subjects); (5) multiple imputation (MI); and (6) MI if at least half of items are answered. We also scored using a “complete case” approach, where subjects with any missing items were excluded. We used multiple imputation with chained equations (also known as fully conditional specification) for methods 5 and 6, which sequentially imputes missing values using regression [19, 20]. All 14 items were used in the imputation algorithm and imputed items outside the range were truncated (e.g. set to 0 or 3). We created ten complete data sets using SAS Proc MI and averaged the items across the sets to make one complete set from which the anxiety and depression scores are created (see below). This is equivalent to creating ten anxiety and depression scores and combining them using Rubin’s rules to get the point estimate (which is just the average of the estimates) [21].^{Footnote 1} Each of the methods were chosen based on their current use by researchers or their ease of use.
The standard scoring algorithm was used: anxiety score = sum of items 1*, 3*, 5*, 7, 9, 11*, 13*; and depression = sum of items 2, 4, 6*, 8*, 10*, 12, 14 where starred items are reverse scored. Both subscales have a possible range of 0–21, with higher scores indicating higher anxiety and/or depression. The anxiety and depression scores from the complete (but reduced, n = 52, 128, 788) dataset were calculated in order to assess the performance of the other methods. Thus for each dataset and its subset with the missing items, eight anxiety and depression scores were calculated.
Statistical methods
We assessed each method by considering performance with respect to both individual and population scores. For individual scores, bias was assessed by computing the average difference of the individual’s imputed and observed (complete) subscale or total score and imprecision was assessed by averaging the squared differences.
For the population, bias was measured as the difference between the mean imputed score (or casewise deleted score) and the mean complete score in the sample. Imprecision was calculated as the squared difference. A difference of 10 % of a scale is sometimes considered to be the minimum important difference (MID) [22], so we used 10 % of the subscale (2.1 points) to indicate an important level of bias. At the suggestion of a reviewer, correlation with quality of life was also estimated.
Results
Descriptive statistics for the original sample are given in Table 1. The mean anxiety score was 5.66 with a standard deviation of 4.20; the mean depression score was 5.07 with a standard deviation of 4.11. Most participants were in the normal range (0–7) for both anxiety (73.6 %) and depression (76.1 %); 17.2 and 16.6 % were in the mild range (8–10); 7.0 and 5.9 % were in the moderate range (11–14); and 2.1 and 1.5 % were in the severe range (15–21) for anxiety and depression respectively. Cronbach’s alpha was 0.87, 0.83 and 0.90 for anxiety, depression and distress respectively. Missing HADS item rates ranged from 1.7 to 2.1 %.
Simulation results: individual scores
Results for the depression subscale are shown in Table 2, for n = 52, since results did not vary by sample size. Full results including anxiety, distress, each of the missing item rates and each of the sample sizes are given in Additional file 1: Appendix S1.
The methods were most sensitive within the subscale missingness mechanism, with higher values of bias and imprecision than the mechanisms of demographic and random, which had similar values. The method that consistently yielded the lowest imprecision and bias for individual scores was the subscale half mean. The next best method for bias was the subscale mean, and the MI ½ for imprecision. The worst method was the item mean, followed by MI and the subject mean, which were similar. These results were consistent regardless of outcome (depression, anxiety, distress), overall sample size, proportion of subjects with missing items, the proportion of missing items per subject, and the missingness mechanism.
Simulation results: population means
Results for population means, at 10 and 25 % missing item rate, are given in Table 3. Results were not dependent on sample size, so only n = 52 is shown. Similar to the individual scores, methods were the most sensitive within the subscale missingness mechanism, with higher values of bias and imprecision than the random and demographic missingness. The correlation with QoL was highly effected when no imputation was used for subscale dependent missingness. For example, correlation was estimated at −0.427 for n = 52 and p_{item} = 0.5, when the correlation for the entire sample was −0.767. The other estimates for this proportion of missing data ranged from −0.701 to −0.769. Although estimated correlations were not as disparate for smaller rates of missing data, the magnitude of the correlation was consistently underestimated.
The worst methods for bias and imprecision were those that resulted in a reduced number of individuals with scores, and the item mean. The worst performing was the complete case. This was largely consistent regardless of outcome (depression, anxiety, distress), overall sample size, proportion of subjects with missing items, the proportion of missing items per subject, and the missingness mechanism. The best method for bias and imprecision was the subject mean, followed by the subscale mean and MI. The magnitude of the bias and imprecision was independent of sample size. Bias ranged from 0 (subject mean) to −3.2 (complete case, subscale missingness, 25 % missing rate). The largest bias amongst the imputation methods was about −1.1 to −1.2, for both the half methods, which is slightly less than the prespecified 2.1 point importance criteria.
Bias and imprecision were not affected by sample size, but they did vary slightly by missingness rates, and by p_{sub} and p_{item}. However, comparing the two cases where the missing item rate was 10 %, we see that the worst methods, overall, were still the complete case, item mean, and the half methods. At 2 % missing item rate, the missing item rate of the source data, bias and imprecision is very small.
Discussion
We performed an extensive simulation study to investigate the best of seven approaches for handling missing items in the HADS. We varied the missingness mechanism, the overall sample size, proportion of subjects with missing items, and the proportion of missing items per subject. We assessed the methods based on both population and individual values. All imputation methods were superior to omitting subjects with missing data (complete case analysis). The best performing imputation methods depended on whether inference was targeted at the individual or at the population. For individuals, the top performing method was the subscale half mean. This method, however, performed poorly according to population measures, with higher bias and imprecision when the proportions of missing data were high. The best method for population inference was the subject mean. However, these issues mostly disappeared as the proportions approached the levels observed in the source data (~2 %). This is consistent with the lack of bias at the individual level particularly for the method that used the subscale mean.
To further investigate the effect of high numbers of missing items within an individual, we conducted another small simulation study to compare the subscale mean and the subscale half mean methods for population measures. We let p_{item} range from 0.5 to 0.929, which corresponds to 7–13 missing items out of the 14. We used p_{sub} = 0.1 and 0.5 (=probability a subject has a missing item) and 1000 simulated datasets of n = 52 with subscale dependent missingness mechanism. We found that when p_{sub} = 0.1, both methods worked well for bias, even with high numbers of missing items. When p_{sub} = 0.5 the subscale mean performed well, in terms of bias and imprecision for up to 12 missing items. The half mean method broke down much sooner. For example, with nine missing items, the bias for the subscale mean was −0.10, as compared to −2.19 for the half method. This indicates that very few complete items may be needed, if inference is population based. Full results can be found in Additional file 2: Appendix S2.
The relatively strong performance of the subscale half mean relative to MI for individuals is likely to have occurred because our study assumed that particular items in the HADS were not more likely to be missing than others, an assumption borne out by examination of missing item rates in the original dataset. If missingness had been particularly high for the items with low (or high) overall means, it may not have performed as well [14]. This uniform missingness is not always the case for all questionnaires. For example, Bell et al. [23] showed that items concerning sexuality were more likely to be missing, and missing informatively, in the FACTG and the Supportive Care Needs Survey [24]. For questionnaires with varying levels of difficulty, and therefore potential for differential missingness, item response theory may be more appropriate [25] though implementation will be a challenge in settings with limited computational resources.
A strength of this study is the large sample size amongst a diverse population, with both cancer patients and survivors, and varying ethnicity. The standard deviations of 4.11 for anxiety, 4.19 for depression and 7.60 for distress are similar to other psychosocial research studies [26], indicating that the study is likely to be generalizable. Another strength is the investigation into performance at both the individual and population level. A limitation is that our study was based on individuals affected by cancer and it is possible that results could vary for different conditions. In particular, if these individuals were more distressed than other populations there would be more right skewness in this sample, which would make the item mean imputation more biased towards higher distress. This would not affect imputation methods based on a subject’s own mean. In practice, the true missing mechanism can be difficult or impossible to determine. Furthermore, missingness is unlikely to be due to a single mechanism. The simulations we have conducted show the extreme cases: random missingness, where the effect of missingness is very small, to subscale dependent missingness, where the effect is larger. In a study, where there are multiple mechanisms, bias and imprecision is likely to fall somewhere in between the two extremes we have shown.
Some researchers use the HADS to classify patients into “depressed” or “anxious” based on a cutoff of eight points [4]. It is well known that dichotomizing continuous variables can lead to problems including misclassification bias [27], and lower power. Given the consistent underestimation of depression in this study, the likelihood of misclassifying depressed (or anxious) individuals as not depressed (or anxious) is increased, although only very slightly for small rates of missingness, and primarily for the complete case approach.
Our objective was to investigate handling missing items in a particular questionnaire, the HADS, so that the subscales or total score can be used for either screening or analyses, such as regression models. If other variables or the entire HADS questionnaire are missing, one may consider using multiple imputation, at least as a sensitivity analysis [5, 28].
Conclusions
Based on these simulations, we strongly recommend the ‘half rule’ using individual subscale means when using the HADS scores at the individual level (e.g. screening). For investigations relying on summary statistics (e.g. sample means), either individual subject, subscale means or MI would be preferable, although we prefer the subject or subscale means due to the comparative simplicity of use. The issue of whether to impose the ‘half rule’ may be academic for studies such as those we used as our source data, as the proportions of subjects who would have more than half the items missing are often quite small. When missing item rates increased, however, important levels of bias occurred, both in the mean of the HADS and the correlation with QoL, underscoring the importance of avoiding missing data.
Notes
 1.
MI generally proceeds as follows: (1) Create M complete datasets. (2) Analyze each of the datasets and get an estimate. (3) Combine M estimates using Rubin’s rules. The point estimate is the average of the M estimates. Since we are not using the variance estimates, it is equivalent to average the items across M multiply imputed datasets and then create one score. Let \({\text{m}} = 1, \ldots ,{\text{M}}\) imputations, \({\text{i}} = 1, \ldots {\text{k}}\) items X and H _{ m } = the HADS score for the mth imputed dataset = \(\sum\nolimits_{i = 1}^{k} {X_{mi} }\). Then the combined estimate of the HADS score is \(H = \tfrac{1}{M}\sum\nolimits_{m}^{M} {H_{m} } = \tfrac{1}{M}\sum\nolimits_{m = 1}^{M} {\sum\nolimits_{i = 1}^{k} {X_{mi} } = } \sum\nolimits_{i = 1}^{k} {\tfrac{1}{M}\sum\nolimits_{m = 1}^{M} {X_{mi} } }\). We are not using the variance estimates in this simulation because we are not performing analyses.
Abbreviations
 FACTG:

Functional Assessment of Cancer Therapy General
 HADS:

Hospital Anxiety and Depression Scale
 MI:

multiple imputation
 SD:

standard deviation
 SF36:

Short Form 36
 QoL:

quality of life
References
 1.
Zigmond AS, Snaith RP. The Hospital Anxiety and Depression Scale. Acta Psychiatr Scand. 1983;67(6):361–70.
 2.
Patel D, Sharpe L, Thewes B, Bell ML, Clarke S. Using the distress thermometer and Hospital Anxiety and Depression Scale to screen for psychosocial morbidity in patients diagnosed with colorectal cancer. J Affect Disord. 2011;131(1–3):412–6.
 3.
Walker J, Postma K, McHugh GS, Rush R, Coyle B, Strong V, Sharpe M. Performance of the Hospital Anxiety and Depression Scale as a screening tool for major depressive disorder in cancer patients. J Psychosom Res. 2011;63(1):83–91.
 4.
Bjelland I, Dahl AA, Haug TT, Neckelmann D. The validity of the Hospital Anxiety and Depression Scale: an updated literature review. J Psychosom Res. 2002;52(2):69–77.
 5.
Bell ML, Fairclough DL. Practical and statistical issues in missing data for longitudinal patientreported outcomes. Stat Methods Med Res. 2014;23(5):440–59.
 6.
Bell ML, Fiero M, Horton NJ, Hsu CH. Handling missing data in RCTs; a review of the top medical journals. BMC Med Res Methodol. 2014;14:118.
 7.
Fairclough DL, Cella DF. Functional assessment of cancer therapy (FACTG): nonresponse to individual questions. Qual Life Res. 1996;5(3):321–9.
 8.
Ware JE Jr, Snow KK, Kosinski M, Gandek B. SF36 health survey manual and interpretation guide. Boston: New England Medical Centre; 1993.
 9.
Functional assessment of cancer therapy—general scoring manual. http://www.facit.org/FACITOrg/Questionnaires. Accessed 19 May 2016.
 10.
Gottschall AC, West SG, Enders CK. A comparison of itemlevel and scalelevel multiple imputation for questionnaire batteries. Multivar Behav Res. 2012;47(1):1–25.
 11.
Van Ginkel JR, Van der Ark LA, Sijtsma K. Multiple imputation of item scores in test and questionnaire data, and influence on psychometric results. Multivar Behav Res. 2007;42(2):387–414.
 12.
Plumpton CO, Morris T, Hughes DA, White IR. Multiple imputation of multiple multiitem scales when a full imputation model is infeasible. BMC Res Notes. 2016;9(1):1–15.
 13.
Little RJA, Rubin DB. Statistical analysis with missing data. New York: Wiley; 1987.
 14.
Fayers PM, Curran D, Machin D. Incomplete quality of life data in randomized trials: missing items. Stat Med. 1998;17(5–7):679–96.
 15.
Sze M, Butow P, Bell M, Vaccaro L, Dong S, Eisenbruch M, Jefford M, Girgis A, King M, McGrane J. Migrant health in cancer: outcome disparities and the determinant role of migrantspecific variables. Oncologist. 2015;20(5):523–31.
 16.
Butow PN, Aldridge L, Bell ML, Sze M, Eisenbruch M, Jefford M, Schofield P, Girgis A, King M, DuggalBeri P. Inferior healthrelated quality of life and psychological wellbeing in immigrant cancer survivors: a populationbased study. Eur J Cancer. 2013;49(8):1948–56.
 17.
Cella DF, Tulsky DS, Gray G, Sarafian B, Linn E, Bonomi A, Silberman M, Yellen SB, Winicour P, Brannon J, et al. The functional assessment of cancer therapy scale: development and validation of the general measure. J Clin Oncol. 1993;11(3):570–9.
 18.
Cohen J. Statistical power analysis for the behavioral sciences. 2nd ed. Hillsdale: Lawrence Earlbaum Associates; 1988.
 19.
Azur MJ, Stuart EA, Frangakis C, Leaf PJ. Multiple imputation by chained equations: what is it and how does it work? Int J Methods Psychiatr Res. 2011;20(1):40–9.
 20.
Van Buuren S. Multiple imputation of discrete and continuous data by fully conditional specification. Stat Methods Med Res. 2007;16:219–42.
 21.
Rubin DB. Multiple imputation for nonresponse in surveys. New York: Wiley; 1987.
 22.
Ringash J, O’Sullivan B, Bezjak A, Redelmeier DA. Interpreting clinically significant changes in patientreported outcomes. Cancer. 2007;110(1):196–202.
 23.
Bell ML, Butow PN, Goldstein D. Informatively missing quality of life and unmet needs sex data for immigrant and AngloAustralian cancer patients and survivors. Qual Life Res. 2013;22(10):2757–60.
 24.
Bonevski B, SansonFisher R, Girgis A, Burton L, Cook P, Boyes A, Ackland S, Baker R, Berry M, Biggs J, et al. Evaluation of an instrument to assess the needs of patients with cancer. Cancer. 2000;88(1):217–25.
 25.
Hambleton RK, Swaminathan H, Rogers HJ. Fundamentals of item response theory. Newbury Park: Sage Press; 1991.
 26.
Bell ML, McKenzie JE. Designing psychooncology randomised trials and cluster randomised trials: variance components and intracluster correlation of commonly used psychosocial measures. Psychooncology. 2013;22(8):1738–47.
 27.
Royston P, Altman DG, Sauerbrei W. Dichotomizing continuous predictors in multiple regression: a bad idea. Stat Med. 2006;25(1):127–41.
 28.
Fairclough DL. Design and analysis of quality of life studies in clincial trials. 2nd ed. Boca Raton: Chapman & Hall/CRC; 2010.
Authors’ contributions
MB conceived the idea and wrote the first draft. PB provided data. DF and MF contributed to analyses. All authors contributed to the analyses. All authors read and approved the final manuscript.
Acknowledgements
None.
Competing interests
The authors declare that they have no competing interests.
Data sharing
Data are unable to be shared due to the wording of the original patient consent forms.
Ethical approval
This is secondary data analysis of deidentified data and does not require ethical approval. However, the Human Research Ethics Committees at the University of Sydney and at all participating sites approved the original study. Thus we are in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki declaration and its later amendments or comparable ethical standards.
Funding
The original studies were funded by grants from the Australian National Health and Medical Research Council (#457432), beyondblue: the national depression initiative, and the Victorian Community Foundation—James & Vera Lawson Trust (managed by ANZ Trustees).
Author information
Additional files
13104_2016_2284_MOESM1_ESM.rtf
13104_2016_2284_MOESM2_ESM.docx
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Bell, M.L., Fairclough, D.L., Fiero, M.H. et al. Handling missing items in the Hospital Anxiety and Depression Scale (HADS): a simulation study. BMC Res Notes 9, 479 (2016) doi:10.1186/s131040162284z
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/s131040162284z
Keywords
 Missing data
 Imputation
 Questionnaires
 Simulation
 Anxiety
 Depression
 Distress