- Research note
- Open Access
In vitro comparative quality evaluation of different brands of esomeprazole tablets available in selected community pharmacies in Dhaka, Bangladesh
BMC Research Notes volume 11, Article number: 184 (2018)
Esomeprazole is the S-isomer of omeprazole, used to treat gastro esophageal reflux disease. It is one of the widely manufactured and marketed drugs by many pharmaceutical companies in Bangladesh. The aim of the study is to compare the different physical parameters including hardness, friability, diameter, thickness, disintegration time, dissolution test and assay for quality evaluation and characterization of tablets of five different brands of Bangladeshi pharmaceutical company. The specified compendial method was followed for their evaluation test.
Esomeprazole Mg tablets are enteric coated tablet, there was no disintegration for any brand occurred in 0.1 N HCl after 2 h and all tablets were disintegrated within 19.93 ± 0.04 to 29.05 ± 0.14 min in phosphate buffer (pH 6.8). Weight variation and Hardness were between 1.01 ± 0.29 to 2.01 ± 0.14% and 5.32 ± 0.06 to 7.12 ± 0.12 kgf respectively. Medicine released after 2 h in 0.1 N HCl were varied from 2.55 ± 0.24 to 4.47 ± 0.31% which was less than 10% and in phosphate buffer (pH 6.8) the percentage of medicine release were between 100.9 and 105.9% after 60 min. In case of assay the results of all brands were between 95.28 ± 0.08 and 99.40 ± 0.11%. The obtained results of all parameters were complied with pharmacopoeial limit. So from this study we can conclude that products of esomeprazole available in Bangladeshi pharmaceutical market meet the quality parameter to satisfy therapeutic efficacy.
Esomeprazole is a proton pump inhibitor (PPI), mainly works by preventing the formation of stomach acid through inhibition of the H+/K+ -ATPase in the parietal cells of the stomach [1, 2]. It is used in the treatment of acid-related diseases such as dyspepsia, peptic ulcer disease, gastroesophageal reflux disease and Zollinger-Ellison syndrome. Quality of medicine is an absolute necessity in terms of both therapeutic efficacy and safety of the patients. World Health Organization claimed that the manufacturers must undertake responsibility for the quality of the medicines that they manufacturing .
About 300 pharmaceutical companies are manufacturing variety of medicines in Bangladesh. Only 3% of the medicines are imported, the remaining 97% come from local companies . Bangladesh has made agreeable positive developments in the pharmaceutical sector. As a result it is now exporting drugs to many countries across the world including the United States . This sector can develop more and can become one of the major exporting sectors in Bangladesh if these sectors overcome the underlying obstacles like active pharmaceutical ingredient (API) importation [4, 5]. The principal criteria for a quality medicine product are safety, potency, efficacy, and stability .
This work will increase awareness among the health practitioners and medicine control authority so that, pharmaceutical manufacturers are forced by them to manufacture quality medicine. This study will also provide a comprehensive knowledge about the weight variation, hardness, disintegration, dissolution, the percentage of the potency of Esomeprazole Mg tablets available in the market and compares these values with the official specifications.
Materials and methods
The specified compendial method was followed for their evaluation test. Five brands of Esomeprazole tablets, manufactured by five different manufacturers of Bangladesh with labelled contents of 20 mg were obtained from retail pharmacy of different areas of Dhaka city. All tablets were of same manufacturing year.
Instruments used in the study
Laboratory instruments such as Dissolution Test Apparatus USP (Minhua, RC-8), UV–Visible Spectrophotometer (T60U PG Instruments, England). Electronic Balance (Ohaus CP213 China), Hardness Tester (Monsanto), Friability Tester, and Disintegration Test Apparatus (Aesico, CAT NO 20066B) were used in this study.
Reagents used in the study
Sodium hydroxide (CID 14798, Merck, Germany), and 0.1 N HCl (CID 313), potassium dihydrogen phosphate (CID 516951, Scharlu, Spain) and dipotassium hydrogen phosphate (CID: 24450 Scharlu, Spain), distilled water (CID: 962) were used. All the reagents were analytical grade.
Collection of samples
A good number of pharmaceutical companies of Bangladesh producing esomeprazole either alone or in combinition forms. There are many brands of Esomeprazole tablets in Bangladesh. Samples were collected from five different batches of every brand which were in same manufacturing year from retail pharmacy of different areas of Dhaka city and collected samples covered top, middle and lower companies ranked by Bangladesh Pharmaceutical Index, 3Q’2011 . The samples were properly checked for their physical appearance, the name of the manufacturer, batch number, manufacturing data, expiration date, manufacturing license number, medicine administration registration number, and the maximum retail price at the time of purchase. The samples were then properly coded for analysis (E01, E02, E03, E04, and E05).
Collection of standard
The reference standard of Esomeprazole was obtained from Incepta Pharmaceutical Ltd, Dhaka, Bangladesh as gift sample for research. The purity of the reference standard was 92.11% as esomeprazole which equivalent to 102.5% of esomeprazole magnesium.
In vitro quality control tests
Weight variation test
Twenty tablets from each brand products were weighed individually in a weighing balance. The average weights of the tablet, as well as their percentage deviation, were calculated (Table 1) using following equation .
where, Iw = Individual weight of the tablet and Aw = Average weight of the tablet.
Hardness indicates the capability of a tablet to withstand mechanical shocks during handling in manufacturing, packaging, and shipping . The hardness of different brands of Esomeprazole tablet was measured by monsanto hardness tester. The test was repeated ten times for each brand. The acceptable limit of hardness of a tablet is 4–8 kgf [10,11,12]. The hardness of five brands of Esomeprazole was determined and the observed results are shown in Table 1.
6 tablets from each brand were used for the disintegration test in 0.1 N HCl at 37 ± 2 °C for 2 h and then in phosphate buffer (pH 6.8) using a disintegration apparatus. The disintegration time was taken to be the time when no particle remained on the basket . Disintegration is the breakdown process of a tablet into smaller particles and is the first step towards dissolution. Enteric coated are to point out no proof of disintegration once 1 hour in simulated stomach fluid and are to disintegrate in 2 h and the time per the monograph within the intestinal fluid. To be compliance with USP standards, the tablets should disintegrate, and particle must pass through the 3 in. long glass tubes and held against a 10-mesh screen within the time given . The onset of action of a dosage form of a drug depends on the time to be taken by the tablets to unharness the active ingredients into the succus. The tablets ought to be disintegrated within the acceptable time, otherwise, the prescribed course is affected and also the drug might not exert its effect properly. The disintegration time of five brands in phosphate buffer (pH 6.8) of Esomeprazole is shown in Table 1.
Preparation of standard curve
Ten milligrams of Esomeprazole Mg was measured by the electronic balance and placed in a 100 ml volumetric flask which was dissolved in phosphate buffer (pH 6.8). The concentration of the solution was attained 100 μg/ml by adding phosphate buffer (pH 6.8) up to 100 ml. 1 ml of a solution was taken from the 100 ml of volumetric flask and phosphate buffer was added up to 10 ml and the concentration was 10 μg/ml. A series of concentrations of the standard solution of Esomeprazole e.g. 2, 4, 8, 10, 12, 16 μg/ml, were taken by above way to measure absorbance at 300 nm against a blank (phosphate buffer) for each solution by UV-spectrophotometer. The measured absorbances were plotted against the respective concentration of the standard solutions which gives a straight line (Fig. 1).
Preparation of standard solution
To prepare a standard solution, 20 mg of Esomeprazole was measured by the electronic balance and placed in 100 ml volumetric flask and dissolved in methanol. Then the concentration of the solution was attained 200 μg/ml by adding phosphate buffer (pH 6.8) up to 100 ml. Then 1 ml of a solution was taken from the 100 ml of volumetric flask and diluted to 10 ml with phosphate buffer and absorbance was measured. To get more precise absorbance it was done at least two times.
Preparation of assay solution
Ten tablets of each brand of Esomeprazole was weighed and powdered. Esomeprazole magnesium equivalent to 20 mg Esomeprazole was weighed and dissolved in methanol and added phosphate buffer up to about 70 ml. Then the solution was sonicated about 15 min in the sonicator. After cooling the solution, phosphate buffer was added into the volumetric flask up to 100 ml and the solution was filtered. 1 ml of the filtered solution was taken in a test tube and made the volume 10 ml with phosphate buffer. Absorbance was measured at 300 nm using UV spectrophotometer. This was done at least three times for each brand of Esomeprazole.
The potency was calculated according Beer-Lambert laws .
In-vitro dissolution studies were carried out using dissolution USP apparatus # II. The dissolution medium was 900 ml of 0.1 N HCl and 900 ml of phosphate buffer (pH 6.8), which was maintained at 37 ± 0.5 °C and 75 RPM. In all dissolution experiments, 5 ml of dissolution samples were withdrawn and replaced with the equal volume fresh dissolution medium at regular intervals. Collected dissolution samples were used for determination of released Esomeprazole concentrations by using a UV–VIS spectrophotometer against a blank at 300 nm (Fig. 2).
Results and discussion
All the brand of Esomeprazole tablets used in this investigation was within their shelf life. The labelled shelf life of all tablets was 3 years from the date of manufacturing. All tablets were subjected to a number of tests in order to assess quality parameters. There are no abnormalities found in the physical appearances of all tablets from different brands.
All tablets obtained from local market were subjected to a number of tests in order to assess quality parameters. The weight variation test is a satisfactory method of determining the medicine content uniformity of tablets and does serve as a pointer to good manufacturing practices (GMP) maintained by the manufacturers as well as the amount of active pharmaceutical ingredient (API) contained in the formulation.
The weight variation for all the tablets used in this study showed compliance within the official specifications [8, 16], as none of the products deviated from the spec. When the weight variation is within the specifications the tablets are thought to contain a uniform active ingredient to give desired therapeutic response but when the weight variation is out of the specification the tablets are thought to contain less or more active ingredient to give an ineffective therapeutic response or toxic effect respectively . It may vary due to result from, poor granulation flow properties, resulting in uneven die fill [18, 19]. It was observed that all the brands meet the USP specification which was between 1.01 ± 0.29 to 2.01 ± 0.14% (Table 1).
Hardness test of material is indicative of its strength. Most important physical feature for assessing tablet is hardness . The acceptable limit of hardness of a tablet is 5–8 kgf. Besides, a force between 4 and 10 kg is also considered to be satisfactory [11, 12, 20, 21]. The hardness of five brands of Esomeprazole was determined and was between 5.32 ± 0.06 to 7.12 ± 0.12 kgf which meet the USP specification (Table 1).
The disintegration time of five brands in phosphate buffer (pH 6.8) of Esomeprazole is shown in Table 1. Before checking the disintegration in phosphate buffer (pH 6.8) they were treated with 0.1 N HCl for 2 h but no disintegration occurs because of its enteric coating. None of the samples exceeded the specification of disintegration time which were between 19.93 ± 0.04 to 29.05 ± 0.14 min. The disintegration time of various brands of Esomeprazole tablet is shown Table 1.
The assay results of all brands were between 95.28 and 99.40% which meet the USP specification for assay test (Table 1).
The dissolution rate of five brands of Esomeprazole tablets was determined. USP specification is NMT 10% in 0.1 N HCl after 2 h and NLT 75% of the labeled amount of Esomeprazole to be dissolved after 45 min in Phosphate buffer (pH 6.8) . Dissolution of esomeprazole tablet of these five brands in 0.1 N HCl were NMT 10% which was 2.55 ± 0.56, 2.64 ± 0.85, 3.88 ± 0.48, 4.47 ± 0.25, 2.94 ± 0.66 respectively whereas the lowest values were 2.55 ± 0.24% and highest value 4.47 ± 0.31% and lowest values were 2.55 ± 0.24% and highest value 4.47 ± 0.31%. Dissolution in Phosphate buffer (pH 6.8) were between 100.9% and 105.9% after 60 min. The five brands of Esomeprazole tablets meet the specifications . The dissolution rate of various brands of Esomeprazole tablet after 60 min is shown in Fig. 2.
Esomeprazole tablets were analyzed to find their correct quality status. For this purpose, the marketed sample of Esomeprazole tablets was analyzed by using established methods and apparatus. The results of all the parameters obtained from the study comply with the Pharmacopoeial limit. So, on the basis of those results, we can conclude that the products of esomeprazole available in Bangladesh meet the quality parameter to satisfy therapeutic efficacy. All of the brands have proved that they have the quality which meets the official specification. The data reported in this study that the sample produced by lower ranked company also ensure quality product which also met the official requirement. This study can help the Drug Control Authority to get an idea about the quality status of the marketed Esomeprazole preparations in Bangladesh.
For this study small number of company was evaluated to assess the quality. Increasing the number of company will give precise idea about the whole scenario of Esomeprazole tablet in Bangladeshi Pharmaceutical market. Authors also faced difficulties during collection of chemical reagents and the reference standard of Esomeprazole for the analytical tests as that was limited in the research laboratory.
United State Pharmacopeia
rotation per minutes
not more than
not less than
Indian pharmacopoeia. Delhi: Controller of Publications; 1996. p. 333–334.
Sultana S, et al. Optimized and validated RP-HPLC method for the determination of esomeprazole magnesium in pharmaceutical formulation. Dhaka Univ J Pharm Sci. 2015;14(2):225–32.
Quality assurance of pharmaceuticals: a compendium of guidelines and related materials. Good manufacturing practices and inspection. World Health Organization; 2007. p. 2.
Anesary MA, Hossain MJ, Mamun MR et al. Pharmaceutical sector of Bangladesh: prospects and challenges.
Beximco pharma starts exporting drugs to US market. 2016. http://www.newsbangladesh.com/english/details/16767. Accessed 12 Jan 2017.
Yamato S, Sakai M, Shimada K. Quantitative analysis of chlorpheniramine maleate in cough and cold medicines by ion-pair high-performance liquid chromatography for the simultaneous determination of chlorpheniramine and maleate. Yakugaku zasshi. 1996;116(4):329–34.
Top 50 pharmaceutical companies in Bangladesh. 2017. http://www.bdprimeit.com/top-50-pharmaceutical-companies-bangladesh. Accessed 12 Feb 2017.
Murtha JL, Julian TN, Radebaugh GW. Simultaneous determination of pseudoephedrine hydrochloride, chlorpheniramine maleate, and dextromethorphan hydrobromide by second- derivative photodiode array spectroscopy. J Pharm Sci. 1988;77(8):715–8.
Khar RK, Vyas SP, Ahmad JF, Jain KG. Lachman/liebermans: the theory and practice of industrial pharmacy. 4th ed. Delhi: CBS Publishers & Distributors; 2013.
The United States Pharmacopeia and National Formulary USP 32–NF 27. Rockville: The United States Pharmacopeial Convention, Inc; 2009. p. 726.
Karmakar P, Kibria MG. In-vitro comparative evaluation of quality control parameters between paracetamol and paracetamol/caffeine tablets available in Bangladesh. Int Curr Pharm J. 2012;1(5):103–9.
Musa H, Sule YZ, Gwarzo MS. Assessment of physicochemical properties of metronidazole tablets marketed in Zaria, Nigeria. Int J Pharm Sci. 2011;3(Suppl 3):27–9.
Kirchhoefer RD. Semautomated method for the analysis of chlorpheniramine maleate tablets: collaborative study. J Assoc Off Anal Chem. 1979;62(6):1197–201.
Banker GS, Anderson NR. Tablets. In: Lachman L, Lieberman HA, editors. The theory and practice of industrial pharmacy. Delhi: CBS Publishers & Distributors; 2009. p. 229–45.
Behera S, Ghanty S, Ahmad F, Santra S, Banerjee S. UV-visible spectrophotometric method development and validation of assay of paracetamol tablet formulation. J Anal Bioanal Tech. 2012;3(6):2–6.
British Pharmacopoeia. The Pharmaceutical Press. London: Her Majesty’s Office; 1998 p. 1296.
Kalakuntla R, Veerlapati U, Chepuri M, Raparla R. Effect of various super disintegrants on hardness, disintegration and dissolution of medicine from dosage form. J Adv Sci Res. 2010;1(1):15–9.
The United States Pharmacopeia and National Formulary USP29–NF24. Rockville: The United States Pharmacopeial Convention, Inc.; 2009. p. 2778.
Bendari A, Al-Shehi B, Ahuja A. Comparison of pharmaceutical properties of different marked brands of metonidazole tables available in Oman. Int J Pharm Arc. 2015;4:2.
The United States Pharmacopeia and National Formulary USP 32–NF 27. Rockville: The United States Pharmacopeial Convention, Inc.; 2009, p. 726.
The United States Pharmacopeia and National Formulary USP29–NF24. Rockville: The United States Pharmacopeial Convention, Inc.; 2009. p. 2778.
United States Pharmacopeia XXIII and National Formulary XVII. Rand McNally, Taunton: United States Pharmacopeia Convention, Inc; 1995. p. 1950.
This work was carried out in collaboration between all authors. Author OD and SS designed the study, wrote the protocol, managed the analyses of the study and prepared the draft of the manuscript. Authors OD, SS and MSH carried out the tests and managed the literature searches. Author SS participated in data analysis and interpretation. OD performed statistical and graphical evaluations. Author OD and SS reviewed the scientific contents of the manuscript. All authors read and approved the final manuscript.
The authors wish to thank the anonymous reviewer(s)/editor(s) of this article for their constructive reviews. The authors are grateful to the Department of Pharmacy, Daffodil International University, Dhaka, Bangladesh for providing research facilities.
The authors declare that they have no competing interests.
Availability of data and materials
All data are presented in the main paper.
Consent to publish
Ethics approval and consent to participate
This work was self-funded.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
dulla, O., Sultana, S. & Shohag Hosen, M. In vitro comparative quality evaluation of different brands of esomeprazole tablets available in selected community pharmacies in Dhaka, Bangladesh. BMC Res Notes 11, 184 (2018). https://0-doi-org.brum.beds.ac.uk/10.1186/s13104-018-3285-x
- Quality control
- Proton pump inhibitor
- Pharmacopoeial specifications