- Research note
- Open Access
RBLOSUM performs better than CorBLOSUM with lesser error per query
BMC Research Notes volume 11, Article number: 328 (2018)
BLOSUM matrices serve as standard matrices for many protein sequence alignment programs. BLOSUM matrices have been constructed using BLOCKS version5.0 with 27,102 BLOCKS, whereas the latest updated version14.3 has 6,739,916 BLOCKS. We read with interest the research article by Hess et al. (BMC Bioinform 17:189, 2016) on CorBLOSUM, wherein it is argued that an inaccuracy in the BLOSUM code affects the cluster memberships of sequences. They show that replacing the integer based clustering threshold to floating point arguably improves the performances of CorBLOSUM over BLOSUM and RBLOSUM matrices. They compare BLOSUM6214.3 against RBLOSUM69, with relative entropies of 0.2685 and 0.2662 respectively. The present work attempts to repeat the computation to verify the respective analog matrices.
In our attempt to repeat the computation, we observed that the relative entropy of BLOSUM6214.3 is 0.2360 and BLOSUM5014.3 is 0.1198. As only matrices of similar entropies can be compared, BLOSUM62 can be compared only with RBLOSUM66 and BLOSUM50 can be compared only with RBLOSUM56. We conducted experiments with Astral data sets, and demonstrated the improved accuracy in the coverage. Our results imply that RBLOSUM performs statistically better than CorBLOSUM and BLOSUM matrices.
Sequence alignment is at the center stage of bioinformatics and amino acid substitution matrices play a major role in sequence alignment and homologous search. Alignment also serves as an initial method for de novo secondary structure prediction of proteins as well as knowledge based structure prediction. BLOSUM matrices  were developed more than two decades ago and were empirically derived from BLOCKS  database version 5.0. BLOSUM50 and BLOSUM62 are the two widely used matrices in all alignment programs . With the increasing accumulation of sequences in public databases, the BLOCKS database has also been updated. The latest release of BLOCKS database is version 14.3 comprising of 6,739,916 sequences. How well the BLOSUM matrix (computed in 1992) is effective in faithfully representing the available data is a significant question. New set of sequences with varying amino acid composition were introduced in different clusters of BLOCKS database, that would be either under-represented or over-represented in the BLOCKSv5 database. Thus the increase in protein conserved regions in the BLOCKS database helps in deriving improved scoring matrices (see Additional file 1). Development and improvement of scoring matrices are crucial for identifying and aligning more distant homologs in similarity studies (see Additional file 2). Improvement in scoring matrices tends to increase the statistical significance and accuracy of alignments. Many studies have been undertaken on BLOSUM matrices, related to recalculating clustering steps  and parametrization . These studies are seen carried out using the initial BLOCKS release version5.0. Hess et al. have recently proposed CorBLOSUM  by addressing an inaccuracy in the BLOSUM code. They relied on computing the matrices by changing the datatype threshold from integer to float. They claim that CorBLOSUM is performing better than BLOSUM and RBLOSUM. The expansion of BLOCKS database prompted us to recompute BLOSUM and also RBLOSUM matrices, using the latest version of the BLOCKS database.
Different BLOSUM matrix variants were created using BLOCKS version5, version13+ and version14.3 which were obtained from http://blocks.fhcrc.blocks/uploads/blocks.tar.gz. The BLOSUM matrices for the updated blocks were recomputed using the Henikoff and Henikoff  algorithm and the source code has been obtained from ftp://ftp.ncbi.nih.gov/repository/blocks/unix/blosum/programs/. Similarly RBLOSUM matrices were recomputed using the algorithm developed by Styczynski et al.  and the respective programs were obtained from http://web.mit.edu/bamel/blosum/revised_blosum.c. CorBLOSUM  matrices were directly obtained from http://www.cbs.tu-darmstadt.de/CorBLOSUM/. BLOSUM50 and BLOSUM62, the most widely used BLOSUM matrices, were considered in the present study. In order to find the analog matrices in RBLOSUM, matrix computing algorithms were executed for various percentage identity thresholds from 45 to 70. The RBLOSUM matrix with relative entropy closest to the BLOSUM matrices  were identified for BLOCKS release version5, version13+ and version14.3.
To evaluate the performance of each matrix, ASTRAL [7,8,9] database was used. ASTRAL is a benchmark data set, created based on SCOP, which classifies proteins into a hierarchical structure of classes, folds, superfamilies, and families based on their structure and functionality [10, 11]. In ASTRAL40 subset, sequences with more than 40% identity were eliminated and remaining were used for further study. This subset aids in identifying the ability of the substitution matrix to detect remote homologs. This non-redundant set numbering 13761 was obtained from http://scop.berkeley.edu/downloads/scopeseq-2.06/astral-scopedom-seqres-gd-sel-gs-bib-40-2.06.fa.
The data set was classified into training and test data set, based on folds. The training set consisted of 629-fold, 1004 super families and 7238 sequences, whereas the test set consisted of 626-fold, 1002 super families and 6522 sequences. Homologous search was performed on the training set with different gap opening and extension penalty. Gap parameter giving highest coverage was used to evaluate the test set. 20,95,25,616 pairwise alignments were performed using the training set and it was evaluated for further study.
In order to evaluate the effectiveness of the matrices computed based on the Astral subset, homologous search study was conducted using Smith-Waterman  local alignment algorithm. We used the SSEARCH implementation of the Smith-Waterman algorithm by Pearson. SSEARCH  has been shown to possess higher accuracy than BLAST in assessing the performance of different substitution matrices . In addition to gap penalties, other parameters were set to default values for conducting similarity search. Previous works  have shown that optimizing gap penalties will boost the performance . These penalties correspond to commonly used parameter settings in homology search tools such as BLAST  and SSEARCH . Homologous search was performed for each combination of matrix, gap open and gap extension penalties. The best performing gap parameter for each matrix, on each of the tested ASTRAL database, was further studied.
Pairwise sequence comparison and evaluation method (PSCE) developed by Price et al.  was used to evaluate the statistical significance of the substitution matrices, using the Bayesian bootstrap. Bayesian bootstraping is a resampling procedure which is operationally similar to the standard non-parametric bootstrap . Sequences were assigned varying weights drawn from a Dirichlet distribution, in the case of Bayesian bootstraping . PSCE uses coverage vs. errors per query (CVE) as a means to evaluate the effectiveness of the substitution matrices. The ability of amino acid substitution match to identify true homolog sequence matches were balanced against its ability to exclude false positives or unrelated sequences. Similar to previous studies [4, 14], coverage at 0.01 errors per query (CVE) was used as a means to evaluate the effectiveness of substitution matrices.
Results and discussion
Difference in the entropy level
RBLOSUM matrices identified as analogs to BLOSUM matrices are displayed in Table 1. For BLOCKS version 5, the entropy values are identical to those reported by Hess et al. and it is highly similar to verison13+. However, the entropy values differ largely for matrices computed using version 14.3.
Previous studies have shown that the most appropriate way to compare two family of matrices is via entropy analogues. By comparing matrices with the same relative entropy, we can better assess the value or the correctness of the information encoded in the matrices [4, 20]. Therefore, different matrices can be compared and analyzed only if the difference of the entropy is relatively smaller between the matrices. Table 1 shows the similarities and differences of matrix entropies observed in the present study and reported by Hess et al.
BLOSUM5014.3 was compared with RBLOSUM59 (having entropies of 0.1509 and 0.1477 respectively) and BLOSUM62 was compared with RBLOSUM69 (having entropies of 0.2685 and 0.2662 respectively) reported by Hess et al. This comparison has revealed that the entropy of BLOSUM5014.3 is 0.1198 and the closest entropy observed is that of RBLOSUM56 (entropy of 0.1234). Similarly, the entropy for BLOSUM6214.3 is 0.2360 and we found RBLOSUM66 as the analog matrix (with entropy of 0.2445). Change in entropies clearly lead to different analog matrices. The RBLOSUM matrix variants discussed in this study and reported by Hess are shown in Additional file 3: Figure S4.
Hess et al. report that CorBLOSUM performs better in case of Astral data sets > 2.01. Changes in entropy lead to different analog matrices, with a few differences in the substitution score. In Additional file 4: Figure S5, shows the difference between RBLOSUM matrices of the present study and the matrix reported by Hess et al.
With the assumption that even slight variation in the matrix value may affect performance, authors have further done the performance analysis using pairwise sequence comparison and evaluation algorithm (PSCE) by Price et al. [14, 18].
Evaluation of the matrices
Three different matrix families computed using BLOCKSv14.3 were compared and evaluated using different gap opening and extension parameters ranging from 11 to 16 and 1 to 2. The highest coverage obtained for different tested gap parameter are shown in Additional file 5: Table S1. The highest coverage was obtained for the gap opening and extension penalty of 12 and 1 respectively. Three matrix families were further evaluated on test database with the gap opening and extension penalty of 12 and 1 respectively,  using Bayesian bootstrapping to distinguish statistically. These search results were analyzed using CVE plots generated using PSCE tool. Figure 1 reports the CVE plot of different BLOSUM families. We reiterate the fact that even slight variation in matrix values can influence the performance  of RBLOSUM than CorBLOSUM. For instance, for entropy level 62, the graph in Fig. 1b clearly indicates that RBLOSUM66 finds more true homologs with minimum error per query than CorBLOSUM and BLOSUM matrices. In the case of entropy level 50 (see Fig. 1a), there is not much significant difference between the performance of RBLOSUM and CorBLOSUM matrices. Though the difference between the CVE lines are smaller, statistically they are significant (see Additional file 6). With quadratic normalization, we observed RBLOSUM66 as the best scoring matrix with a coverage of 0.451182, as shown in Table 2. Thus we argue that RBLOSUM outperforms the CorBLOSUM.
In addition to the Astral v2.06, a few more Astral data set versions were also included in the analysis to reconfirm the performance of the matrices. RBLOSUM66 has been identified as the matrix with higher coverage and lesser error per query, from the inferred results of additional analysis (see Additional file 7).
Conclusion and recommendation
In this paper, we have highlighted the entropy differences observed in RBLOSUM matrices as computed by us with that reported by Hess et al. The RBLOSUM matrices created in our study are substantially different from RBLOSUM of Hess et al. We have shown that it outperforms the CorBLOSUM and BLOSUM matrices. In a few cases tested by us, RBLOSUM and CorBLOSUM counterparts at the entropy level 50, performed almost equally with statistical significance. We emphasize that, with Astral dataset 2.06 and a few additional ASTRAL versions of dataset, RBLOSUM performs better than CorBLOSUM in terms of finding true homologous with less error per query. RBLOSUM performs statistically significant for the release of Blocks database version14.3. This difference in result reported by Hess et al. is due to selection of analog matrix with non-comparable entropy levels. We therefore refute the conclusion of Hess et al.
In a broader canvas, our work points to the need for reviewing the cardinal tools and techniques in science, taking into consideration the high quality data that is emerging with the advent of sophisticated instrumentation systems. Such investigations may reconfirm or correct existing tools and techniques.
The main limitation of the study is, different gap parameter tests were performed only on Astral v2.06 data set. Remaining additional data sets were evaluated using gap opening and extension penalty of 12 and 1 respectively, which was identified as the best gap parameter in the present study.
pairwise sequence comparison and evaluation tool
coverage vs error per query
Henikoff S, Henikoff JG. Amino acid substitution matrices from protein blocks. Proc Natl Acad Sci. 1992;89(22):10915–9.
Henikoff S, Henikoff JG. Automated assembly of protein blocks for database searching. Nucleic Acids Res. 1991;19:6565–72.
Pearson WR. Selecting the right similarity-scoring matrix. Curr Protoc Bioinform. 2013;43:351–9.
Styczynski MP, Jensen KL, Rigoutsos I, Stephanopoulos G. BLOSUM62 miscalculations improve search performance. Nat Biotechnol. 2008;26(3):274–5.
Song D, Chen J, Chen G, Li N, Li J, Fan J, Bu D, Li SC. Parameterized blosum matrices for protein alignment. IEEE/ACM Trans Comput Biol Bioinform. 2015;12(3):686–94.
Hess M, Keul F, Goesele M, Hamacher K. Addressing inaccuracies in BLOSUM computation improves homology search performance. BMC Bioinform. 2016;17:189.
Chandonia JM, Hon G, Walker NS, Lo Conte L, Koehl P, Levitt M, Brenner SE. The ASTRAL compendium in 2004. Nucleic Acids Res. 2004;32(Database issue):189–92.
Chandonia JM, Walker NS, Lo Conte L, Koehl P, Levitt M, Brenner SE. ASTRAL compendium enhancements. Nucleic Acids Res. 2002;30:260–3.
Brenner SE, Koehl P, Levitt M. The ASTRAL compendium for sequence and structure analysis. Nucleic Acids Res. 2000;28:254–6.
Murzin AG, Brenner SE, Hubbard T, Chothia C. SCOP: a structural classification of proteins database for the investigation of sequences and structures. J Mol Biol. 1995;247(4):536–40.
Fox NK, Brenner SE, Chandonia JM. SCOPe: structural classification of proteins-extended, integrating SCOP and ASTRAL data and classification of new structures. Nucleic Acids Res. 2014;42(Database issue):304–9.
Smith TF, Waterman MS. Identification of common molecular subsequences. J Mol Biol. 1981;147(1):195–7.
Pearson WR. Searching protein sequence libraries: comparison of the sensitivity and selectivity of the Smith-Waterman and FASTA algorithms. Genomics. 1991;11(3):635–50.
Green RE, Brenner SE. Bootstrapping and normalization for enhanced evaluations of pairwise sequence comparison. Proc IEEE. 2002;90(12):1834–47.
Gribskov M, Robinson NL. Use of receiver operating characteristic [ROC] analysis to evaluate sequence matching. Comput Chem. 1996;20(1):25–33.
Brenner SE, Chothia C, Hubbard TJ. Assessing sequence comparison methods with reliable structurally identified distant evolutionary relationships. Proc Natl Acad Sci. 1998;95(11):6073–8.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol. 1990;215(3):403–10.
Price GA, Crooks GE, Green RE, Brenner SE. Statistical evaluation of pairwise protein sequence comparison with the Bayesian bootstrap. Bioinformatics. 2005;21(20):3824–31.
Rubin DB. The Bayesian bootstrap. Ann Stat. 1981;9:130–4.
Altschul SF. Amino acid substitution matrices from an information theoretic perspective. J Mol Biol. 1991;219(3):555–65.
Reese JT, Pearson WR. Empirical determination of effective gap penalties for sequence comparison. Bioinformatics. 2002;18(11):1500–7.
Tomii K, Kanehisa M. Analysis of amino acid indices and mutation matrices for sequence comparison and structure prediction of proteins. Protein Eng. 1996;9:27–36.
RG and AN jointly conceived the idea of this work. RG performed the analysis and wrote the manuscript and composed the figures. AN supervised the work and BC and AN edited the manuscript. All authors revised the manuscript. All authors read and approved the final manuscript.
RG gratefully acknowledge Sajira R. for the code implementation and computation.
The authors declare that they have no competing interests.
Availability of data and materials
The data sets analyzed during the current study are available at https://github.com/rengabioinf/Astral_seq. These datasets were derived from the following public domain resources http://scop.berkeley.edu/downloads/scopeseq-2.06/astral-scopedom-seqres-gd-sel-gs-bib-40-2.06.fa. The reported coverage values supporting the conclusions of this article are included within the article. The matrices discussed in this article are available at https://github.com/rengabioinf/Astral_seq/blob/master/matrices.zip.
Consent for publication
Ethics approval and consent to participate
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Influence of increased blocks in computed matrices.
Significance of improved matrices in similarity studies.
Comparison of RBLOSUM matrices observed in the present study and Hess et al.
Differences observed between RBLOSUM variants of present study and Hess et al.
Range of gap parameters evaluated using SSEARCH.
Statistical significance of CVE lines between the matrices.
Results and CVE plots of additional analysis performed on ASTRAL data sets.
About this article
Cite this article
Govindarajan, R., Leela, B.C. & Nair, A.S. RBLOSUM performs better than CorBLOSUM with lesser error per query. BMC Res Notes 11, 328 (2018). https://0-doi-org.brum.beds.ac.uk/10.1186/s13104-018-3415-5
- Substitution matrix
- Sequence similarity search